Name: ASTM E 1868 : 2010 : R2021
Brand: ASTM
Price: 63.00 USD

Standard Test Methods for Loss-On-Drying by Thermogravimetry

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-22-2021

Publisher

American Society for Testing and Materials

1.1These test methods describe a procedure for determining the amount of volatile matter of any kind that is driven off from a test specimen under a specific set of temperature and time conditions. These test methods determine only the mass of material lost, not its identity.

1.2These test methods are applicable to a wide variety of solid or liquid materials, mixtures, or blends where the major component is stable at the test temperature.

Note 1:These test methods can be applied to the analysis of volatile organic compounds (VOC) content in metalworking fluids and direct contact lubricants subject to South Coast Air Quality Management District (SCAQMD) Rule 1144.

1.3The applicable temperature range for these test methods are generally between ambient temperature and 1000°C.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5There is no ISO method equivalent to this test standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	E 37
DocumentType	Test Method
Pages	6
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM E 1868 : 2010 : R2015

ASTM E 1860 : 2013 : R2018

Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

ASTM E 1142 : 2022	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2022 : REV D	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 1582 : 2021	Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E 1582 : 2017	Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E 473 : 2022	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2021	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D 4017 : 2002 : R2015	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 1509 : 2018 : R2023	Standard Test Methods for Carbon Black—Heating Loss
ASTM E 1142 : 2022 : REV A	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2022 : REV C	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2022 : REV B	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2018	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1142 : 2015 : R2020	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2021 : REV A	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2023 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2022 : REV C	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1860 : 2023	Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM D 2595 : 2022	Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1142 : 2022 : REV B	Standard Terminology Relating to Thermophysical Properties
ASTM D 2595 : 2017	Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM D 1509 : 2018	Standard Test Methods for Carbon Black—Heating Loss
ASTM E 1142 : 2023	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2021 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2023 : REV B	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2022 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2023	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 1142 : 2023 : REV B	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2021	Standard Terminology Relating to Thermophysical Properties
ASTM D 4017 : 2022	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM E 1142 : 2023 : REV A	Standard Terminology Relating to Thermophysical Properties