ASTM E 2007 : 2010 : R2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Computed Radiography
Available format(s)
Hardcopy , PDF
Superseded date
06-30-2023
Language(s)
English
Published date
08-12-2016
This guide provides general tutorial information regarding the fundamental and physical principles of computed radiography (CR), definitions and terminology required to understand the basic CR process.
1.1This guide provides general tutorial information regarding the fundamental and physical principles of computed radiography (CR), definitions and terminology required to understand the basic CR process. An introduction to some of the limitations that are typically encountered during the establishment of techniques and basic image processing methods are also provided. This guide does not provide specific techniques or acceptance criteria for specific end-user inspection applications. Information presented within this guide may be useful in conjunction with those standards of 1.2.
1.2CR techniques for general inspection applications may be found in Practice E2033. Technical qualification attributes for CR systems may be found in Practice E2445. Criteria for classification of CR system technical performance levels may be found in Practice E2446. Reference Images Standards E2422, E2660, and E2669 contain digital reference acceptance illustrations.
1.3The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
E 07
|
| DocumentType |
Guide
|
| Pages |
23
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 2895 : 2015 | Standard Practice for Digital Radiography of Cast Metallic Implants |
| ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 2662 : 2015 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 2446 : 2016 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| ASTM E 2662 : 2015 : R2022 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM F 2895 : 2020 | Standard Practice for Digital Radiography of Cast Metallic Implants |
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 1161 : 2021 | Standard Practice for Radiographic Examination of Semiconductors and Electronic Components |
| ASTM E 2445/E2445M : 2020 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
| ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 2445/E2445M : 2014 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
| ASTM E 2982 : 2014 : EDT 1 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| ASTM E 2002 : 2022 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 2660 : 2017 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E 2446 : 2016 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2339 : 2004 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1025 : 2011 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2033 : 1999 : R2013 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2669 : 2010 | Standard Digital Reference Images for Titanium Castings |
| ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 2660 : 2022 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E 2339 : 2011 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2669 : 2016 : EDT 1 | Standard Digital Reference Images for Titanium Castings |
| ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2339 : 2015 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 2422 : 2005 | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
| ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 1998 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 2446 : 2005 : R2010 | Standard Practice for Classification of Computed Radiology Systems |
| ASTM E 2033 : 1999 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2660 : 2010 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E 2339 : 2015 : REDLINE | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 1998 : R2003 : EDT 1 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 2339 : 2008 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 2339 : 2021 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 2002 : 1998 : R2009 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2669 : 2011 | Standard Digital Reference Images for Titanium Castings |
| ASTM E 2669 : 2022 | Standard Digital Reference Images for Titanium Castings |
| SMPTE RP 133 : 1991(R1999) | SPECIFICATIONS FOR MEDICAL DIAGNOSTIC IMAGING TEST PATTERN FOR TELEVISION MONITORS AND HARD-COPY RECORDING CAMERAS |
| ASTM E 1453 : 2009 | Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data |
| ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2005 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 2339 : 2006 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1453 : 2014 | Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data |
| ASTM E 2422 : 2022 | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 2015 : REDLINE | Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 1453 : 1993 : R1996 | Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data |
| ASTM E 2446 : 2005 | Standard Practice for Classification of Computed Radiology Systems |
| ASTM E 1453 : 2014 : REDLINE | Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data |
| ASTM E 1025 : 1998 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2669 : 2016 | Standard Digital Reference Images for Titanium Castings |
| ASTM E 2339 : 2010 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
| ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2445 : 2005 : R2010 | Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
| ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 2015 | Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 2446 : 2016 : REDLINE | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| ASTM E 2660 : 2011 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2033 : 1999 : R2006 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 2660 : 2017 : REDLINE | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E 2422 : 2017 | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
| ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2422 : 2017 : REDLINE | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 2445 : 2005 | Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
| ASTM E 2446 : 2015 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2422 : 2011 | Standard Digital Reference Images for Inspection of Aluminum Castings |
| ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
US$108.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.