Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-01-2017

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of total carbon in mold powders in the concentration range from 1 % to 25 %.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This test method has been evaluated in accordance with Practice E1601 and Guide E1763. Unless otherwise noted in the precision and bias section, the lower limit in the scope of each method specifies the lowest analyte content that may be analyzed with acceptable error (defined as a nominal 5 % risk of obtaining a 50 % or larger relative difference in results on the same test sample in two laboratories).

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	E 01
DocumentType	Test Method
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM E 2050 : 2012 : REV A

ASTM E 29 : 2013 : R2019	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 135 : 2023	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 135 : 2021 : REV A	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1019 : 2018	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
ASTM E 1019 : 2003	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 135 : 2003 : REV B	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 2019	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 135 : 2023 : REV A	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 1998	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1019 : 2008	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM E 1601 : 2010	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1763 : 2006	Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods (Withdrawn 2015)
ASTM E 135 : 2002 : REV A	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2022 : REV B	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 2012	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 135 : 2022 : REV A	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2021	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1763 : 1998	Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E 135 : 2003 : REV C	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2022	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 50 : 1982 : R1986	Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM E 135 : 2020 : REV B	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1019 : 2000	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 1019 : 2002	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 1019 : 2011	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM E 29 : 2022	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications