• There are no items in your cart

ASTM E 21 : 2020

Current
Current

The latest, up-to-date edition.

Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-01-2020

1.1These test methods cover procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area of metallic materials at elevated temperatures.

1.2Determination of modulus of elasticity and proportional limit are not included.

1.3Tension tests under conditions of rapid heating or rapid strain rates are not included.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 28
DocumentType
Test Method
Pages
9
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM C 1671 : 2020 : REV A Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
ASTM A 1077/A1077M : 2014 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM A 193/A193M : 2020 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 1095 : 2015 : R2019 Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
ASTM E 2215 : 2019 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
ASTM B 351/B351M : 2013 : R2018 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B 352/B352M : 2017 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM F 3055 : 2014 : REV A Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM E 1012 : 2019 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM C 1366 : 2019 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM F 2281 : 2004 : R2017 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM A 732/A732M : 2020 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM B 655/B655M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Bar and Wire
ASTM B 776 : 2012 : R2019 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
ASTM E 209 : 2018 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E 531 : 2013 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
ASTM A 579/A579M : 2020 Standard Specification for Superstrength Alloy Steel Forgings
ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM E 185 : 2016 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E 83 : 2016 Standard Practice for Verification and Classification of Extensometer Systems
ASTM B 737 : 2010 : R2021 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM B 353 : 2012 : R2017 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM E 2448 : 2018 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM B 811 : 2013 : R2017 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM E 633 : 2021 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing
ASTM A 20/A20M : 2020 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
ASTM F 2924 : 2014 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM A 608/A608M : 2020 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ASTM B 661 : 2012 : R2020 Standard Practice for Heat Treatment of Magnesium Alloys
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM E 3205 : 2020 Standard Test Method for Small Punch Testing of Metallic Materials
ASTM B 654/B654M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM A 447/A447M : 2011 : R2021 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM A 1099/A1099M : 2020 Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels

ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 220 : 2019 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E 83 : 2023 Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 177 : 1990 : REV A : R1996 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 83 : 2000 : EDT 1 Standard Practice for Verification and Classification of Extensometer
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 83 : 1998 : EDT 1 Standard Practice for Verification and Classification of Extensometer
ASTM E 633 : 2021 : REV A Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 633 : 2021 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 633 : 2013 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.