ASTM E 3050 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
Hardcopy , PDF
01-22-2022
English
12-14-2020
CONTAINED IN VOL. 05.06, 2016 Defines denatured ethanol intended to be used as a cooking or appliance fuel, or both.
1.1This specification covers denatured ethanol intended to be used as a cooking or appliance fuel, or both.
1.2Nothing in this specification shall preclude observance of federal, state, or local regulations.
1.2.1Denatured ethanol has many regulatory limitations that cover the production, trading, transporting, distributing, wholesale and retail sale, and use of denatured ethanol; this specification does not purport to address the regulatory compliance aspects of these activities.
1.3The addition of a denatonium benzoate is required in addition to any other denaturants that are added.
1.3.1The denatonium benzoate is added as an additional deterrent to consumption. The denatonium benzoate must be added in an amount that meets the minimum and maximum requirements listed in Table 1.
1.4The addition of a colored dye is also required. The colored dye must be added in a concentration sufficient to enable the visual detection of the color in the fuel but in an amount less than the maximum listed in Table 1.
1.4.1The colored dye is added to visually indicate that the product is not potable.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
E 48
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 5501 : 1994 : R1998 : EDT 1 | Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
| ASTM D 7795 : 2012 | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
| ASTM E 1064 : 2012 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 5501 : 2012 : EDT 1 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM D 4815 : 2015 : REV B | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4306 : 1997 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 4306 : 2015 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM E 1064 : 2000 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 4815 : 2015 : REV B : R2019 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM E 1064 : 2005 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 5854 : 1996 : R2010 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM E 1064 : 2004 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 5854 : 2019 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4306 : 2001 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 4306 : 2007 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 5501 : 2009 | Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
| ASTM D 5854 : 1996 : R2005 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 7795 : 2015 : REDLINE | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4306 : 2012 : REV A | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4815 : 1999 : EDT 1 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 5501 : 2012 : R2016 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM D 4306 : 2012 : REV B | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 4815 : 2009 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4815 : 2015 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4815 : 2004 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4815 : 1999 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM E 1064 : 2008 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
| ASTM D 5854 : 1996 : R2000 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4815 : 2013 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4815 : 2003 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 5501 : 2020 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography |
| ASTM E 1064 : 2004 : REV A | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM E 1064 : 2016 : REDLINE | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 4306 : 2013 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 5501 : 2012 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4306 : 2020 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 7795 : 2015 | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
| ASTM D 5854 : 2019 : REV A | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4815 : 2015 : REV A | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM E 1064 : 2016 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 5854 : 1996 : R2015 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 5501 : 2004 | Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
| ASTM D 4306 : 2012 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 4306 : 2012 : REV C | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.