• There are no items in your cart

ASTM E 3203 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
Available format(s)

Hardcopy , PDF

Superseded date

11-07-2019

Language(s)

English

Published date

04-01-2019

This test method specifies a procedure for analysis of dried paint, soil, and dust wipe samples collected in and around buildings and related structures for lead content using inductively coupled plasma-optical emission spectroscopy (ICP-OES).

1.1This test method specifies a procedure for analysis of dried paint, soil, and dust wipe samples collected in and around buildings and related structures for lead content using inductively coupled plasma-optical emission spectroscopy (ICP-OES).

1.2This test method should be used by analysts experienced in the use of ICP-OES, the interpretation of spectral and matrix interferences, and procedures for their correction. For determination of lead (Pb) and other metals in air by ICP-OES, see Test Method D7035.

1.3This test method cites specific methods for preparing test solutions of dried paint, soil, and wipe samples for analysis.

1.4It is the user’s responsibility to ensure the validity of this test method for sampling materials of untested matrices.

1.5No detailed operating instructions are provided because of differences among various makes and models of suitable ICP-OES instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This test method does not address comparative accuracy of different devices or the precision between instruments of the same make and model.

1.6This test method contains notes that are explanatory and are not part of the mandatory requirements of this test method.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 22
DocumentType
Test Method
Pages
13
ProductNote
THIS STANDARD ALSO REFERES TO : ASTM E 2914/E2914M, EPA SW-846, JCGM 100
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM E 1792 : 2003 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1792 : 2003 : R2011 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1792 : 2001 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1726 : 2001 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1792 : 2003 : R2016 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1583 : 1993 Practice for Evaluating Laboratories Engaged in the Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures (Withdrawn 1998)
ASTM D 1356 : 2015 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1645 : 2001 : R2007 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 6966 : 2018 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM E 1644 : 2004 : R2012 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1979 : 2004 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM D 1356 : 2017 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1645 : 1994 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D 7035 : 2010 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1729 : 1999 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 2115 : 2000 Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children
ASTM D 6785 : 2002 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 1999 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM D 6785 : 2008 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1645 : 2016 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2001 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 2115 : 2006 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities (Withdrawn 2015)
ASTM D 6966 : 2008 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1727 : 2005 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM D 1356 : 2015 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1908 : 1997 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
ASTM E 1979 : 2012 : R2016 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1726 : 2001 : R2009 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 1729 : 2004 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM E 1908 : 2003 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
ASTM E 1729 : 2016 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E 1728 : 2016 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
ASTM E 1908 : 2010 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E 1613 : 1999 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM D 1356 : 2014 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1727 : 1999 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
ASTM D 7440 : 2008 : R2015 : EDT 1 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM E 1728 : 2002 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1792 : 2002 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1729 : 2005 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014)
ASTM E 1979 : 2012 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2010 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1583 : 2017 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM D 1356 : 2015 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 7440 : 2008 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D 1356 : 2005 : R2010 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 6966 : 2003 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
ASTM E 1613 : 2004 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E 2115 : 2015 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 1792 : 2001 : EDT 1 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 1356 : 2000 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
ASTM E 1644 : 2004 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1356 : 2014 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 1727 : 2004 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D 1356 : 2014 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM E 2115 : 2005 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM E 1979 : 1998 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1644 : 1998 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1726 : 2016 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM E 1792 : 1996 : REV A Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
ASTM E 1726 : 1995 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E 2115 : 2005 : REV A Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 1644 : 2004 : R2016 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D 1356 : 2005 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 7035 : 2004 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
ASTM E 1727 : 2016 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D 6966 : 2013 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
ASTM E 1728 : 2003 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E 1908 : 2016 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E 1645 : 2001 : R2016 : EDT 1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.