ASTM E 344 : 2001 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Terminology Relating to Thermometry and Hydrometry
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Language(s)
English
Published date
12-31-2010
1.1 This terminology is a compilation of definitions of terms used by ASTM Committee E20 on Temperature Measurement.
1.2 Terms with definitions generally applicable to the fields of thermometry and hydrometry are listed in 3.1.
1.3 Terms with definitions applicable only to the indicated standards in which they appear are listed in 3.2.
1.4 Information about the International Temperature Scale of 1990 is given in Appendix X1 .
| Committee |
E 20
|
| DocumentType |
Reference Material
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 6176 : 1997 : R2015 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| ASTM E 1750 : 2010 : R2016 | Standard Guide for Use of Water Triple Point Cells |
| ASTM F 2362 : 2003 : R2019 | Standard Specification for Temperature Monitoring Equipment |
| ASTM D 6987/D6987M : 2013 : REV A | Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022) |
| ASTM E 633 : 2013 | Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air |
| ASTM D 2700 : 2019 : EDT 1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
| ASTM E 100 : 2019 | Standard Specification for ASTM Hydrometers |
| ASTM E 2120 : 2010 : R2016 | Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
| ASTM E 2877 : 2012 : R2019 | Standard Guide for Digital Contact Thermometers |
| ASTM E 1594 : 2016 | Standard Guide for Expression of Temperature |
| ASTM E 2181/E2181M : 2019 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable |
| ASTM E 2847 : 2014 | Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers |
| ASTM E 1159 : 2015 : R2020 : EDT 1 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
| ASTM E 207 : 2008 : R2015 : EDT 1 | Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
| ASTM E 574 : 2019 | Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation |
| ASTM E 608/E608M : 2013 : R2019 | Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples |
| ASTM E 2995 : 2015 : REV A : R2020 | Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers |
| ASTM D 6922 : 2013 : R2018 | Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils |
| ASTM E 1480 : 1992 : R2013 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 644 : 2011(R2019) | Standard Test Methods for Testing Industrial Resistance Thermometers |
| ASTM E 2820 : 2013 : R2019 | Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors |
| ASTM E 1965 : 1998 : R2016 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ASTM E 77 : 2014 : EDT 1 | Standard Test Method for Inspection and Verification of Thermometers |
| ASTM D 7583 : 2016 | Standard Test Method for John Deere Coolant Cavitation Test |
| ASTM E 1061 : 2001 : R2014 | Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| ASTM E 1350 : 2018 | Standard Guide for Testing Sheathed Thermocouples, Thermocouple Assemblies, and Connecting Wires Prior to, and After Installation or Service |
| ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 2699 : 2019 : EDT 1 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
| ASTM E 1299 : 1996 : R2016 | Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature |
| ASTM E 563 : 2011 : R2016 | Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
| ASTM E 667 : 1998 : R2017 | Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers (Withdrawn 2022) |
| ASTM E 2623 : 2014 | Standard Practice for Reporting Thermometer Calibrations |
| ASTM E 825 : 1998 : R2016 | Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
| ASTM E 1104 : 1998 : R2016 | Standard Specification for Clinical Thermometer Probe Covers and Sheaths |
| ASTM E 1142 : 2015 : R2020 | Standard Terminology Relating to Thermophysical Properties |
| ASTM E 220 : 2019 | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
| ASTM E 839 : 2011 : R2016 : EDT 1 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
| ASTM D 6923 : 2018 | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure |
| ASTM E 601 : 2020 | Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air |
| ASTM E 2730 : 2010 : R2015 : EDT 2 | Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits |
| ASTM E 126 : 2019 | Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers |
| ASTM E 2846 : 2020 | Standard Guide for Thermocouple Verification |
| ASTM E 1 : 2014 : R2020 | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 1112 : 2000 : R2018 | Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
| ASTM E 2593 : 2017 | Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers |
| ASTM E 780 : 2017 | Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature |
| ASTM E 1137/E1137M : 2008 : R2020 | Standard Specification for Industrial Platinum Resistance Thermometers |
| ASTM E 1129/E1129M : 2019 | Standard Specification for Thermocouple Connectors |
| ASTM E 1751/E1751M : 2020 | Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM E 879 : 2020 | Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements |
| ASTM E 452 : 2002 : R2018 | Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer |
| ASTM E 1652 : 2015 | Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples |
| ASTM D 6026 : 2013 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM E 2821 : 2020 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers |
| ASTM E 585/E585M : 2018 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
| ASTM D 909 : 2018 : EDT 1 | Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
| ASTM E 696 : 2007 : R2018 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
| ASTM E 1502 : 2016 | Standard Guide for Use of Fixed-Point Cells for Reference Temperatures |
| ASTM E 2488 : 2009 : R2014 | Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.