• There are no items in your cart

ASTM E 492 : 2009 : R2016 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
Available format(s)

Hardcopy , PDF

Superseded date

11-05-2022

Language(s)

English

Published date

11-04-2016

CONTAINED IN VOL. 04.06, 2016 Describes the laboratory measurement of impact sound transmission of floor-ceiling assemblies using a standardized tapping machine.

1.1This test method covers the laboratory measurement of impact sound transmission of floor-ceiling assemblies using a standardized tapping machine. It is assumed that the test specimen constitutes the primary sound transmission path into a receiving room located directly below and that a good approximation to a diffuse sound field exists in this room.

1.2Measurements may be conducted on floor-ceiling assemblies of all kinds, including those with floating-floor or suspended ceiling elements, or both, and floor-ceiling assemblies surfaced with any type of floor-surfacing or floor-covering materials.

1.3This test method prescribes a uniform procedure for reporting laboratory test data, that is, the normalized one-third octave band sound pressure levels transmitted by the floor-ceiling assembly due to the tapping machine.

1.4Laboratory Accreditation—The requirements for accrediting a laboratory for performing this test method are given in Annex A2.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 33
DocumentType
Test Method
Pages
9
ProductNote
Reconfirmed EDT 1
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 841 : 2003 : R2018 Standard Specification for Installation of Interior Lathing and Furring
ASTM C 843 : 2017 Standard Specification for Application of Gypsum Veneer Plaster
ASTM E 966 : 2018 : REV A Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
ASTM E 2813 : 2018 Standard Practice for Building Enclosure Commissioning
ASTM C 634 : 2013 : R2021 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E 989 : 2021 Standard Classification for Determination of Single-Number Metrics for Impact Noise
ASTM E 2964 : 2021 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM C 844 : 2015 : R2021 Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster
ASTM C 842 : 2005 : R2021 Standard Specification for Application of Interior Gypsum Plaster
ASTM C 926 : 2022 : REV B Standard Specification for Application of Portland Cement-Based Plaster
ASTM E 90 : 2009 : R2016 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E 3133 : 2018 : EDT 1 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine (Withdrawn 2023)
ASTM E 1007 : 2021 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 336 : 2020 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
ASTM E 1749 : 2018 Standard Terminology Relating to Rigid Wall Relocatable Shelters
ASTM E 3207 : 2021 Standard Classification for Determination of Low-Frequency Impact Noise Ratings
ASTM E 2179 : 2021 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
ASTM E 3091 : 2017 Standard Specification for Systems to Measure Sound Levels
ASTM E 3222 : 2020 : REV A Standard Classification for Determination of High-frequency Impact Sound Ratings

ASTM E 989 : 2018 Standard Classification for Determination of Single-Number Metrics for Impact Noise
ASTM C 423 : 2017 : REDLINE Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM E 2235 : 2003 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 1414 : 2000 : REV A Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM C 634 : 2013 : EDT 1 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E 2235 : 2004 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 2235 : 2004 : R2020 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 989 : 2021 Standard Classification for Determination of Single-Number Metrics for Impact Noise
ASTM E 2235 : 2004 : R2012 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ISO 140-6:1998 Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors
ANSI S1.11 : 2014 SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS
IEC 60942:2003 Electroacoustics - Sound calibrators
ASTM C 423 : 2017 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM E 1007 : 2019 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM C 634 : 2013 : R2021 Standard Terminology Relating to Building and Environmental Acoustics
ASTM C 423 : 2022 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM E 2235 : 2004 : EDT 1 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 1007 : 2011 : EDT 1 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 1007 : 2013 : REV A Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 1414 : 2006 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ANSI S1.10 : 66(R2001) AMERICAN NATIONAL STANDARD METHOD FOR THE CALIBRATION OF MICROPHONES
ASTM E 1007 : 1997 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ANSI S1.43 : 1997 SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS
ASTM E 1007 : 2021 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 1007 : 2013 : REV B Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
ASTM E 1007 : 2014 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 1007 : 2004 : EDT 1 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E 1007 : 2016 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.