• There are no items in your cart

ASTM E 716 : 2016

Current
Current

The latest, up-to-date edition.

Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-28-2016

1.1These practices describe procedures for producing a chill cast disk sample from molten aluminum during the production process, and from molten metal produced by melting pieces cut from products.

1.2These practices describe a procedure for obtaining qualitative results by direct analysis of product using spark atomic emission spectrometry.

1.3These practices describe procedures for preparation of samples and products prior to analysis.

1.4The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.5This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 6.1 and 7.2.

Committee
E 01
DocumentType
Standard Practice
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
SupersededBy
Supersedes

ASTM E 826 : 2014 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023)
ASTM B 210/B210M : 2019 : REV A Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B 491/B491M : 2015 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B 985 : 2012 : R2016 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
ASTM B 236 : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
ASTM B 108/B108M : 2019 Standard Specification for Aluminum-Alloy Permanent Mold Castings
ASTM B 247 : 2020 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B 209/B209M : 2021 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B 483/B483M : 2021 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
ASTM B 373 : 2019 Standard Specification for Aluminum Foil for Capacitors
ASTM B 26/B26M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Sand Castings
ASTM B 316/B316M : 2020 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B 928/B928M : 2015 Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM B 221 : 2021 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B 241/B241M : 2016 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM E2972 : 2015(2019) Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
ASTM B 80 : 2015 Standard Specification for Magnesium-Alloy Sand Castings
ASTM B 969/B969M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
ASTM B 479 : 2019 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B 308/B308M : 2020 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM B 955/B955M : 2018 Standard Specification for Aluminum-Alloy Centrifugal Castings
ASTM B 179 : 2018 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM B 618/B618M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Investment Castings
ASTM B 234M : 2017 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
ASTM B 247M : 2020 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
ASTM B 429/B429M : 2020 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B 221M : 2021 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
ASTM B 317/B317M : 2007 : R2015 : EDT 1 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B 211/B211M : 2019 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM B 686/B686M : 2018 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B 234 : 2017 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
ASTM B 236M : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024)
ASTM B 37 : 2018 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

ASTM E 1251 : 2007 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 1251 : 1994 : R1999 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
ASTM E 135 : 2021 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1251 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM E 135 : 2003 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1251 : 2004 Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 135 : 2002 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1251 : 2011 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM E 135 : 2021 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003 : REV C Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 401 : 1970 : R1989 : EDT 1 Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
ASTM E 135 : 2020 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1251 : 2017 : REV A Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.