• There are no items in your cart

ASTM E 72 : 2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
Available format(s)

Hardcopy , PDF

Superseded date

11-05-2022

Language(s)

English

Published date

05-19-2015

1.1These test methods cover the following procedures for determining the structural properties of segments of wall, floor, and roof constructions:

Section

Test Specimens

3

Loading

4

Deformation Measurements

5

Reports

6

Precision and Accuracy

7

TESTING WALLS

Significance and Use

8

Compressive Load

9

Tensile Load

10

Transverse Load—Specimen Horizontal

11

Transverse Load—Specimen Vertical

12

Concentrated Load

13

Impact Load—See Test Methods E695 and E661

Racking Load—Evaluation of Sheathing Materials
 on a Standard Wood Frame

14

Racking Load—Evaluation of Sheathing Materials (Wet)
 on a Standard Wood Frame

15

TESTING FLOORS

Significance and Use

16

Transverse Load

17

Concentrated Load

18

Impact Load—See Test Methods E695 and E661

TESTING ROOFS

Section

Significance and Use

19

Transverse Load

20

Concentrated Load

21

APPENDIX

Technical Interpretation

Appendix X1

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.2.1Exception—SI units are used in Fig. 6.

Committee
E 06
DocumentType
Test Method
Pages
13
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

NFPA 120:2023 Standard for Fire Prevention and Control in Coal Mines
ASTM E 1803 : 2014 : R2022 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
ASTM C 956 : 2004(R2019) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
ASTM E 2570/E2570M : 2007 : R2019 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
ASTM D 2394 : 2017 : R2022 Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
ASTM C 887 : 2020 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
ASTM C 90 : 2022 Standard Specification for Loadbearing Concrete Masonry Units
ASTM D 3841 : 2021 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
ASTM C 1852 : 2020 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
ASTM E 2969 : 2018 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
ASTM C 208 : 2022 Standard Specification for Cellulosic Fiber Insulating Board

ASTM E 2126 : 2011 : R2018 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E 2126 : 2005 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
ASTM D 4442 : 2007 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM E 2322 :2003 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM D 2395 : 1993 : R1997 : EDT 2 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 7438 : 2020 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 4442 : 2015 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM E 2322 : 2003 : R2015 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM E 2126 : 2019 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E 2126 : 2002 : REV A Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E 2126 : 2011 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E 695 : 1979 : R1997 : EDT 1 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
ASTM D 4442 : 2016 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 2395 : 2017 : R2022 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 2395 : 1993 : R1997 : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 7438 : 2013 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 2395 : 2007 : REV A Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 2126 : 2002 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM D 2395 : 2017 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM E 2126 : 2001 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM D 7438 : 2008 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 4442 : 2020 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM E 2126 : 2008 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E 2322 : 2003 : R2009 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM D 2395 : 2014 : EDT 1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM D 2395 : 2014 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM E 73 : 2013 : R2021 Standard Practice for Static Load Testing of Truss Assemblies
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM D 2395 : 2006 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 2126 : 2010 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM D 2395 : 2007 : REV A : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 73 : 1983 : R1996 : EDT 1 Standard Practice for Static Load Testing of Truss Assemblies
ASTM E 73 : 2013 Standard Practice for Static Load Testing of Truss Assemblies
ASTM E 2126 : 2009 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E 2126 : 2007 : REV A Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM D 2395 : 2002 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM D 4442 : 1992 : R1997 : EDT 1 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1984 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1992 : R2003 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.