• There are no items in your cart

ASTM E 83 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Verification and Classification of Extensometer Systems
Available format(s)

Hardcopy , PDF

Superseded date

02-27-2023

Language(s)

English

Published date

01-25-2017

This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification.

1.1This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification. The practice is applicable only to instruments that indicate or record values that are proportional to changes in length corresponding to either tensile or compressive strain. Extensometer systems are classified on the basis of the magnitude of their errors.

1.2Because strain is a dimensionless quantity, this document can be used for extensometers based on either SI or US customary units of displacement.

Note 1:Bonded resistance strain gauges directly bonded to a specimen cannot be calibrated or verified with the apparatus described in this practice for the verification of extensometers having definite gauge points. (See procedures as described in Test Methods E251.)

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 28
DocumentType
Standard Practice
Pages
14
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 1856 : 2013 : R2021 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM C 1819 : 2021 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM D 3916 : 2022 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk /> Plastic Rod
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 790 : 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM C 1773 : 2021 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D 1621 : 2016 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM C 1337 : 2017 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D 7791 : 2022 Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 2659 : 2016 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
ASTM E 1012 : 2019 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 695 : 2015 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM C 1366 : 2019 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM D 2105 : 2001 : R2019 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM C 1869 : 2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM E 606/E606M : 2021 Standard Test Method for Strain-Controlled Fatigue Testing
ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 4018 : 2017 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM E 2760 : 2019 : EDT 1 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 2208 : 2002 : R2018 : EDT 1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM A 370 : 2022 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 209 : 2018 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM E 9 : 2019 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D 4535 : 2021 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1922/E1922M : 2022 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM A 1022/A1022M : 2022 : REV A Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
ASTM D 5083 : 2017 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM D 7248/D7248M : 2021 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM C 469/C469M : 2022 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
ASTM E 2368 : 2010 : R2017 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM D 7774 : 2022 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM E 2954 : 2015 : R2022 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM E 1457 : 2019 : EDT 1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D 4027 : 1998 : R2019 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 7205/D7205M : 2021 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1360 : 2017 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM B 1008 : 2018 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
ASTM D 6272 : 2017 : EDT 1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E 238 : 2017 : REV A Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM D 3552 : 2017 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM C 1361 : 2010 : R2019 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM D 198 : 2022 : REV A Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM C 1863 : 2018 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM D 7615/D7615M : 2019 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM A 1034/A1034M : 2010 : REV A : R2015 Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM F 606/F606M : 2021 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics
ASTM D 3983 : 1998 : R2019 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 8387/D8387M : 2021 Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
ASTM E 132 : 2017 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM C 1273 : 2018 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM E 251 : 2020 : REV A Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E 2309/E2309M : 2020 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM D 7913/D7913M : 2014 : R2020 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM B 500/B500M : 2022 Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
ASTM D 6108 : 2019 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM E 2207 : 2015 : R2021 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM F 2977 : 2020 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM C 1424 : 2015 : R2019 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM F 2516 : 2022 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM C 1499 : 2019 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E 1942 : 1998 : R2018 : EDT 1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM C 1899 : 2021 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM C 1358 : 2018 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.