ASTM F 2083 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Knee Replacement Prosthesis
Available format(s)
Hardcopy , PDF
Superseded date
12-07-2023
Language(s)
English
Published date
04-15-2013
1.1This specification is intended to cover all the widely used generic types of knee replacement prostheses used to provide functioning articulation. This includes total knee replacement (TKR) and unicondylar knee replacement (UKR) prostheses of both fixed and mobile bearing varieties, and for primary or revision surgeries. Although a patellar component may be considered an integral part of a TKR, the detailed description of this component is excluded here since it is provided in Specification F1672.
1.2Included within the scope of this specification are replaceable components of modular designs, for example, tibial articulating surfaces and all components labeled for, or capable of, being used with cement, regardless of whether the same components can also be used without cement.
1.3This specification is intended to provide basic descriptions of material and prosthesis geometry. Additionally, those characteristics determined to be important to in vivo performance of the prosthesis are defined. However, compliance with this specification does not itself define a device that will provide adequate clinical performance.
| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 1223 : 2020 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1223 : 2014 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 2777 : 2016 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| ASTM F 2722 : 2015 | Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
| ASTM F 3140 : 2017 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| ASTM F 2723 : 2008 | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
| ASTM F 1044 : 2005 : R2011 : EDT 1 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| ASTM F 1160 : 2005 : R2011 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1223 : 2004 : REV A | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1672 : 2014 | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 1223 : 2004 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1377 : 1998 : REV A | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Powder for Coating of Orthopedic Implants (UNS-R30075) |
| ASTM F 1580 : 1995 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 1800 : 2019 : EDT 1 | Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 1672 : 2014 : R2019 | Standard Specification for Resurfacing Patellar Prosthesis (Withdrawn 2023) |
| ASTM F 1223 : 2008 : R2012 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1108 : 2002 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1537 : 2011 | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1472 : 2002 : REV A | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 1108 : 1997 : REV A | Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1160 : 2005 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1108 : 2004 : R2009 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1108 : 2004 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1147 : 1999 | Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings |
| ASTM F 1147 : 2005 : R2011 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| ASTM F 2384 : 2010 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ASTM F 1044 : 2005 : R2017 : EDT 1 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| ASTM F 1814 : 1997 : REV A | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| ASTM F 1472 : 2000 | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications |
| ASTM F 2722 : 2008 | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
| ASTM F 1147 : 2005 | Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings |
| ASTM F 1108 : 2014 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1160 : 2000 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1800 : 1997 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 2777 : 2010 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| ASTM F 2384 : 2010 : R2016 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ASTM F 1537 : 2008 | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1223 : 2014 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1223 : 2003 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1580 : 2018 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 1537 : 2007 | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1377 : 2013 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 1472 : 2008 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 1377 : 2004 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 1223 : 2005 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1800 : 2019 | Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 2723 : 2013 | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
| ASTM F 1814 : 2015 | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| ASTM F 1044 : 1999 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| ASTM F 2723 : 2013 : REV A | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
| ASTM F 1672 : 1995 : R2005 | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 1672 : 1995 : R2000 | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 1472 : 2014 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 1800 : 2004 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 1537 : 2020 | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1800 : 2007 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 1160 : 2014 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1672 : 1995 : EDT 1 | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 1580 : 2007 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 2384 : 2005 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ASTM F 2724 : 2008 | Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| ASTM F 1580 : 2001 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 1472 : 1999 | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications |
| ASTM F 1160 : 2014 : R2017 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1814 : 1997 : REV A : R2003 | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| ASTM F 1537 : 2000 | Standard Specification for Wrought Cobalt-28-Chromium-6-Molybdenum Alloy for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1160 : 2000 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM F 1377 : 2008 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 1800 : 2012 | Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| ASTM F 1814 : 1997 : REV A : R2009 | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
| ASTM F 1147 : 2005 : R2017 : EDT 1 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| ASTM F 2724 : 2008 : R2014 | Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| ASTM F 1223 : 1996 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1044 : 2005 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| ASTM F 1223 : 2001 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 1472 : 2008 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 1580 : 2012 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 2777 : 2016 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| ASTM F 1672 : 1995 : R2011 | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 1223 : 2008 | Standard Test Method for Determination of Total Knee Replacement Constraint |
| ASTM F 2722 : 2015 | Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.