• There are no items in your cart

ASTM F 2229 : 2021

Current
Current

The latest, up-to-date edition.

Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-08-2021

1.1This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 23manganese-21chromium-1molybdenum low-nickel stainless steel alloy bar and wire for surgical implants.

1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ASTM F 621 : 2012 : R2017 Standard Specification for Stainless Steel Forgings for Surgical Implants
ASTM F 2181 : 2020 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

ASTM F 746 : 2004 : R2014 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM A 555/A555M : 2020 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM A 484/A484M : 2023 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM A 555/A555M : 2021 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 10 : 2023 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 45 : 2018 : REV A Standard Test Methods for Determining the Inclusion Content of Steel
ASTM A 484/A484M : 2021 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM E 354 : 2021 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM A 555/A555M : 2022 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM A 555/A555M : 2023 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM A 262 : 1998 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM E 45 : 2018 : REV A : R2023 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM F 1586 : 2013 : EDT 1 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
ASTM E 354 : 2021 : EDT 1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM A 484/A484M : 2022 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM F 746 : 2004 : R2021 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM A 262 : 2015 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A 751 : 2020 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM A 484/A484M : 2024 Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
ASTM F 1586 : 2021 Standard Specification for Wrought Nitrogen Strengthened 21Chromium—10Nickel—3Manganese—2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
ASTM E 18 : 2019 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 354 : 2014 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
ASTM E 112 : 2013 Standard Test Methods for Determining Average Grain Size
ASTM A 484/A484M : 2023 : REV A Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
ASTM E 407 : 2007 : R2015 : EDT 1 Standard Practice for Microetching Metals and Alloys
ASTM A 484/A484M : 2020 : REV B Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM E 407 : 2023 Standard Practice for Microetching Metals and Alloys
ASTM E 10 : 2018 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM A 262 : 2015 : R2021 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.