• There are no items in your cart

ASTM F 2510/F2510M : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
Available format(s)

Hardcopy , PDF

Superseded date

03-24-2022

Language(s)

English

Published date

02-08-2018

1.1This specification covers the design, material, and minimum performance requirements of resilient connectors used for connections between reinforced concrete structures conforming to Specifications C478 and C913 to annular corrugated profile wall high density polyethylene (HDPE) drainage and sewer pipe conforming to AASHTO M252, M294, and M330 or Specifications F2306/F2306M, F2648/F2648M, F2736, F2763, F2764/F2764M, and F2947/F2947M.

1.1.1These connectors are designed to provide a positive seal between the pipe and manholes or other structures subjected to internal and external hydrostatic pressures less than 10.8 psi [74 KPa].

1.1.2Testing under this standard is limited to hydrostatic pressures. Alternate air and vacuum pressure testing involve unique testing protocols and are not addressed under this standard.

1.1.3Testing under this standard is conducted in a laboratory as a proof of design certification. Actual field performance testing would be accomplished and accepted under individual project performance standards or pipeline acceptance criteria, which is outside the scope of this standard.

Note 1:Infiltration or exfiltration quantities for an installed system are dependent upon many factors other than the connections between manhole structures and pipe, and allowable quantities must be covered by other specifications and suitable testing of the installed pipeline and system.

Note 2:This specification may be applied to other types of plastic drainage pipe. Consult with manufacturer of pipe for applicability to this standard.

1.2The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system may not be exact equivalents: therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3The following precautionary caveat pertains only to the test methods portion, Section 7. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific precaution statement, see 7.2.3.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 17
DocumentType
Standard
Pages
4
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 1821/C1821M : 2016 : R2021 : EDT 1 Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures

ASTM D 1566 : 2004 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2009 Standard Terminology Relating to Rubber
ASTM D 1566 : 2006 Standard Terminology Relating to Rubber
ASTM D 1566 : 2008 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2021 : REV A Standard Terminology Relating to Rubber
ASTM C 822 : 2021 Standard Terminology Relating to Concrete Pipe and Related Products
ASTM C 913 : 2021 Standard Specification for Precast Concrete Water and Wastewater Structures
ASTM F 412 : 2020 : REV A Standard Terminology Relating to Plastic Piping Systems
ASTM F 477 : 2014 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F 412 : 2021 Standard Terminology Relating to Plastic Piping Systems
ASTM D 1566 : 2005 Standard Terminology Relating to Rubber
ASTM F 2736 : 2013 : EDT 1 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe (Withdrawn 2018)
ASTM F 2947/F2947M : 2021 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM D 1566 : 2002 : REV A Standard Terminology Relating to Rubber
ASTM F 477 : 2002 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1566 : 2007 Standard Terminology Relating to Rubber
ASTM F 2736 : 2012 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
ASTM D 1566 : 2019 Standard Terminology Relating to Rubber
ASTM F 2763 : 2011 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM D 1566 : 2015 Standard Terminology Relating to Rubber
ASTM F 2736 : 2013 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
ASTM D 1566 : 2008 Standard Terminology Relating to Rubber
ASTM D 1566 : 2005 : REV A Standard Terminology Relating to Rubber
ASTM F 2736 : 2010 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
ASTM C 822 : 2020 Standard Terminology Relating to Concrete Pipe and Related Products
ASTM D 1566 : 2006 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2003 : REV A Standard Terminology Relating to Rubber
ASTM F 477 : 2014 : R2021 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1566 : 2006 : REV B Standard Terminology Relating to Rubber
ASTM D 1566 : 2005 : REV B Standard Terminology Relating to Rubber
ASTM D 1566 : 2011 Standard Terminology Relating to Rubber
ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
ASTM F 2763 : 2016 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM D 1566 : 2000 : REV B Standard Terminology Relating to Rubber
ASTM F 2306/F2306M : 2020 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM D 1566 : 2014 Standard Terminology Relating to Rubber
ASTM D 1566 : 2010 Standard Terminology Relating to Rubber
ASTM F 2306/F2306M : 2021 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F 2947/F2947M : 2021 : REV A Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM D 1566 : 2003 Standard Terminology Relating to Rubber
ASTM D 1566 : 2000 Standard Terminology Relating to Rubber
ASTM F 2947/F2947M : 2020 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
ASTM D 1566 : 2007 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2005 : REV C Standard Terminology Relating to Rubber
ASTM C 913 : 2018 Standard Specification for Precast Concrete Water and Wastewater Structures
ASTM D 1566 : 2010 : EDT 1 Standard Terminology Relating to Rubber
ASTM D 1566 : 2008 : REV B Standard Terminology Relating to Rubber

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.