ASTM F 2634 : 2015

Name: ASTM F 2634 : 2015
Brand: ASTM
Price: 83.00 USD

Superseded

View Superseded by

Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

Available format(s)

Hardcopy , PDF

Superseded date

01-06-2022

Language(s)

English

Published date

11-26-2015

Publisher

American Society for Testing and Materials

1.1This is a tensile impact test method that develops enough tensile impact energy at specific rates of strain to rupture standard tensile impact specimens of butt fused plastic pipe. It is used to determine the quality of PE butt fusion joints made in the field or in qualification testing. It can also be used to determine the optimum butt fusion joining parameters of PE materials.

1.2This test method is applicable for testing pipe specimens with a diameter 2.37 in. (60.3 mm) and larger with a wall thickness from 0.25 in. (6.3 mm) and larger.

Note 1:This test method is similar to ISO 13953.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4This test method may be used alone or together with other test methods, to evaluate the quality of the butt fused joints. When this test, conducted at laboratory temperatures per 9.2, is combined with the elevated temperature, sustained pressure test in Specification D3035, both the short term and long term strength of the PE butt fusion joint will be verified.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	F 17
DocumentType	Test Method
Pages	13
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM F 2634 : 2015 : R2021
Supersedes	ASTM F 2634 : 2010

ASTM E 3101 : 2018	Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
ASTM F 3190 : 2016	Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
ASTM F 645 : 2018 : REV B	Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM F 3183 : 2016	Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
ASTM F 3507 : 2021	Standard Practice for Butt-Fusion Joining of Crosslinkable Polyethylene (CX-PE) Pipe and Tubing
ASTM F 3190 : 2021	Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings

ASTM D 3035 : 2003	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 3035 : 2012	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM E 177 : 1990 : REV A : R1996	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D 2513 : 2006	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2016	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2003 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2014	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2012 : REV A	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2012 : EDT 2	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2008 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2011 : REV B	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2006 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2009	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2004	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 1987	Standard Specification for Thermoplastic Gas Pressure Piping Systems
ASTM D 3035 : 2006	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2011 : REV C	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2016 : REV A	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2013	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2513 : 1999	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2015	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2009 : REV A	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2003 : REV B	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2003 : REV A	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2001 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2001	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2001 : REV A : EDT 1	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3035 : 2010	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2011 : EDT 1	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2014 : EDT 1	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 1995	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 3035 : 2008	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2014	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2000	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2007 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2019	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2011	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2008 : REV B	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2003	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2513 : 2006 : REV B	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2001	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 3035 : 2021	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 3035 : 2012 : EDT 1	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2007 : REV B : EDT 1	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2008	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2018 : REV A	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2007	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2007 : REV B	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2012 : REV A : EDT 1	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2018	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2011 : REV A	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2012	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D 3035 : 2014 : REV A	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 2513 : 2004 : REV A	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2513 : 2005	Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings