• There are no items in your cart

ASTM F 3292 : 2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Inspection of Spinal Implants Undergoing Testing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-01-2019

This practice provides guidance for non-destructive photographic analysis of spinal implants prior to, during, and after testing

1.1This practice provides guidance for non-destructive photographic analysis of spinal implants prior to, during, and after testing. The purpose of this practice is to provide methods for documenting notable changes in implant characteristics (e.g., surface defects, cracks, plastic deformation) that have occurred during the course of a mechanical test. Documenting these changes may assist in understanding if mechanical failure has occurred, and how.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Standard Practice
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current

ASTM F 2706 : 2008 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1582 : 1998 : R2016 Standard Terminology Relating to Spinal Implants
ASTM F 2193 : 2018 : REV A Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 2193 : 2020 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 1717 : 2021 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2267 : 2004 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 2077 : 2003 Test Methods For Intervertebral Body Fusion Devices
ASTM F 2789 : 2010 : R2015 Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
ASTM F 1798 : 2021 Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 2193 : 2018 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 2624 : 2012 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
ASTM F 2077 : 2022 Standard Test Methods for Intervertebral Body Fusion Devices
ASTM F 2423 : 2005 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM F 2790:2010 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM F 1717 : 2018 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1582 : 1998 : R2003 Standard Terminology Relating to Spinal Implants
ASTM F 1717 : 2014 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1798 : 1997 : R2008 Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 1717 : 2015 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1717 : 2013 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2077 : 2017 Test Methods For Intervertebral Body Fusion Devices
ASTM F 1717 : 2001 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2267 : 2004 : R2011 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 2267 : 2003 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 2346 : 2018 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM F 1717 : 2010 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2624 : 2007 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants
ASTM F 2077 : 2000 Test Methods For Intervertebral Body Fusion Devices
ASTM F 2790 : 2010 : R2014 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM F 2346 : 2005 : R2011 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM F 1717 : 2004 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2694 : 2007 : R2013 Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
ASTM F 2077 : 2018 Test Methods For Intervertebral Body Fusion Devices
ASTM F 2423 : 2011 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM F 2193 : 2002 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 2077 : 2001 Test Methods For Intervertebral Body Fusion Devices
ASTM F 2789 : 2010 : R2020 Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
ASTM F 2706 : 2017 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2624 : 2012 : R2016 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
ASTM F 2694 : 2016 Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
ASTM F 1717 : 2011 : REV A Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2077 : 2011 Test Methods For Intervertebral Body Fusion Devices
ASTM F 1798 : 2013 Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 2790 : 2010 : R2019 : EDT 1 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM F 2423 : 2011 : R2016 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM F 1582 : 1998 : R2011 Standard Terminology Relating to Spinal Implants
ASTM F 1717 : 1996 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1798 : 1997 : R2003 Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 1717 : 2012 : REV A Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2694 : 2007 Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
ASTM F 2706 : 2008 : R2014 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2193 : 2014 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 1717 : 2012 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 2193 : 2002 : R2007 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F 2789 : 201 Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
ASTM F 2346 : 2005 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM F 1798 : 1997 Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 1717 : 2009 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F 1582 : 1998 Standard Terminology Relating to Spinal Implants
ASTM F 2077 : 2014 Test Methods For Intervertebral Body Fusion Devices
ASTM F 2267 : 2022 Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 2267 : 2004 : R2018 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.