• There are no items in your cart

ASTM F 3318 : 2018

Current
Current

The latest, up-to-date edition.

Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-01-2018

CONTAINED IN VOL. 10.04, 2018 Defines additively manufactured AlSi10Mg (similar to DIN EN 1706:2013-12 EN AC-43000) parts using powder bed fusion such as laser melting.

1.1This specification covers additively manufactured AlSi10Mg (similar to DIN EN 1706:2013-12 EN AC-43000) parts using powder bed fusion such as laser melting. The parts produced by these processes are used typically in applications that require mechanical properties similar to or exceeding those of cast aluminum products of equivalent alloys. Parts manufactured to this specification are often, but not necessarily, post processed via machining, grinding, electrical discharge machining (EDM), polishing, and so forth to achieve desired surface finish and critical dimensions.

1.2This specification is intended for the use of purchasers or producers, or both, of additively manufactured AlSi10Mg parts for defining the requirements and ensuring part properties.

1.3Users are advised to use this specification as a basis for obtaining parts that will meet the minimum acceptance requirements established and revised by consensus of the members of the committee.

1.4User requirements considered more stringent may be met by the addition to the purchase order of one or more supplementary requirements, which may include, but are not limited to, those listed in Supplementary Requirements S1–S16.

1.5The values stated in SI units are to be regarded as the standard. Other units are included only for informational purposes.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 42
DocumentType
Standard
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ASTM E 1820 : 2013 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2009 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1251 : 2007 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 1820 : 2023 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
ASTM F 2971 : 2013 Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 647 : 1995 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 1742 : 2000 Standard Practice for Radiographic Examination
ASTM E 1479 : 2016 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM B 311 : 2017 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 964 : 2016 : REDLINE Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM E 1820 : 2021 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1417 : 2005 Standard Practice for Liquid Penetrant Testing
ASTM E 1479 : 1999 : R2005 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM E 1820 : 2011 : EDT 2 Standard Test Method for Measurement of Fracture Toughness
ISO 9044:2016 Industrial woven wire cloth Technical requirements and tests
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
ASTM E 606 : 1992 : R1998 Standard Practice for Strain-Controlled Fatigue Testing
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 384 : 2022 Standard Test Method for Microindentation Hardness of Materials
ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
SAE AMS 2175 : 2010 CASTINGS, CLASSIFICATION AND INSPECTION OF
ASTM E 1251 : 1994 : R1999 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
ASTM E 10 : 2023 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM B 964 : 2016 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM F 2971 : 2013 : R2021 Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
ASTM E 1820 : 2020 Standard Test Method for Measurement of Fracture Toughness
ISO/ASTM 52921:2013 Standard terminology for additive manufacturing — Coordinate systems and test methodologies
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 23 : 2022 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM B 214 : 2022 Standard Test Method for Sieve Analysis of Metal Powders
ASTM E 2368 : 2010 : R2017 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM B 311 : 2017 : REDLINE Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B 855 : 2017 : REDLINE Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM E 647 : 2023 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 1251 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM E 466 : 2015 : REDLINE Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM B 855 : 2017 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM E 3 : 2011 : R2017 Standard Guide for Preparation of Metallographic Specimens
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ASTM E 384 : 2011 Standard Test Method for Knoop and Vickers Hardness of Materials
ASTM E 1820 : 2011 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2006 Standard Test Method for Measurement of Fracture Toughness
ASTM B 311 : 1993 : R1997 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
ASTM E 647 : 2022 : REV A Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 1450 : 2003 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 466 : 1996 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM B 213 : 2017 : REDLINE Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM E 1820 : 2018 Standard Test Method for Measurement of Fracture Toughness
ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E 1820 : 2011 Standard Test Method for Measurement of Fracture Toughness
ASTM E 2368 : 2004 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 155 : 2015 : REDLINE Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E 606/E606M : 2012 : REDLINE Standard Test Method for Strain-Controlled Fatigue Testing
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
ASTM F 3049 : 2014 : R2021 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
ASTM E 2368 : 2004 : EDT 1 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 1820 : 2008 : REV A Standard Test Method for Measurement of Fracture Toughness
ISO 12737:2010 Metallic materials Determination of plane-strain fracture toughness
ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
ASTM B 243 : 2022 Standard Terminology of Powder Metallurgy
ASTM E 1450 : 2009 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1479 : 2016 : REDLINE Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM E 23 : 2023 : REV A Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1417 : 2005 : EDT 1 Standard Practice for Liquid Penetrant Testing
ASTM F 3049 : 2014 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
ASTM E 1742 : 2008 : REV A Standard Practice for Radiographic Examination
ASTM E 647 : 2022 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 1820 : 2017 Standard Test Method for Measurement of Fracture Toughness
ISO 4545:1993 Metallic materials Hardness test Knoop test
ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
ASTM E 399 : 2023 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E 1820 : 2020 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ASTM B 964 : 2023 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM D 3951 : 2018 : R2023 Standard Practice for Commercial Packaging
ASTM E 1450 : 1992 : R1998 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 214 : 2016 : REDLINE Standard Test Method for Sieve Analysis of Metal Powders
ASTM E 9 : 2009 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E 1417 : 1999 Standard Practice for Liquid Penetrant Examination
ASTM E 647 : 2023 : REV A Standard Test Method for Measurement of Fatigue Crack Growth Rates
VDI 3405-2-1 : 2015 COR 2017 ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG
ISO 19819:2004 Metallic materials Tensile testing in liquid helium
ASTM E 1820 : 2017 : REV A Standard Test Method for Measurement of Fracture Toughness
ISO 12111:2011 Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
ASTM E 1417/E1417M : 2016 : REDLINE Standard Practice for Liquid Penetrant Testing
ASTM E 1479 : 1999 : R2011 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM B 311 : 2022 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM E 1820 : 2005 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1251 : 2004 Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 1820 : 2022 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 238 : 1984 : R1996 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM B 243 : 2020 Standard Terminology of Powder Metallurgy
ASTM E 23 : 2018 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 466 : 2021 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 23 : 2002 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1820 : 2015 Standard Test Method for Measurement of Fracture Toughness
ASTM E 466 : 2015 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2018 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM B 214 : 2016 Standard Test Method for Sieve Analysis of Metal Powders
ASTM E 1820 : 2020 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 647 : 2015 : EDT 1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ISO 6508:1986 Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K)
ASTM E 1820 : 2006 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ISO 12108:2012 Metallic materials Fatigue testing Fatigue crack growth method
ASTM E 23 : 2023 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1820 : 2023 Standard Test Method for Measurement of Fracture Toughness
ISO/ASTM 52915:2016 Specification for additive manufacturing file format (AMF) Version 1.2
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM E 1742 : 2005 Standard Practice for Radiographic Examination
ISO/ASTM 52900:2015 Additive manufacturing General principles Terminology
ASTM B 243 : 2023 Standard Terminology of Powder Metallurgy
ASTM E 18 : 2019 Standard Test Methods for Rockwell Hardness of Metallic Materials
ISO 9001:2015 Quality management systems — Requirements
ASTM E 9 : 1989 : REV A : R1995 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ISO 12135:2016 Metallic materials Unified method of test for the determination of quasistatic fracture toughness
ASTM E 1251 : 2011 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM B 855 : 2022 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM E 1820 : 2015 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
ASTM E 1820 : 2018 : REV A Standard Test Method for Measurement of Fracture Toughness
ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
ASTM E 384 : 2017 Standard Test Method for Microindentation Hardness of Materials
ASTM E 1820 : 2016 Standard Test Method for Measurement of Fracture Toughness
DIN EN 1706:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
ASTM E 8 : 2004 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 769 : 2011 : R2021 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM E 1820 : 1999 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2001 Standard Test Method for Measurement of Fracture Toughness
ASTM E 647 : 2022 : REV B Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 1742 : 2006 Standard Practice for Radiographic Examination
ASTM E 399 : 2022 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E 1820 : 2013 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2015 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2022 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1450 : 2016 : REDLINE Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1820 : 2009 Standard Test Method for Measurement of Fracture Toughness
ASTM E 2368 : 2010 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 1820 : 2005 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1450 : 1992 : R1998 : EDT 1 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1251 : 2017 : REV A Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM E 407 : 2007 : R2015 : EDT 1 Standard Practice for Microetching Metals and Alloys
ASTM E 407 : 2023 Standard Practice for Microetching Metals and Alloys
ASTM E 10 : 2018 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 1479 : 1999 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM E 1820 : 2023 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM B 769 : 2011 : R2016 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.