• There are no items in your cart

ASTM F 3510 : 2021

Current
Current

The latest, up-to-date edition.

Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-13-2021

1.1This guide is a resource for the characterization of fiber-based constructs intended for use in a tissue-engineered medical product (TEMP). There are existing standards that broadly cover scaffolds in a more generalized fashion (Guides F2150, F2450, F2900, F2902, ISO 21560). This guide focuses specifically on fiber-based constructs.

1.2Fiber-based constructs may be fabricated by many different methods including, but not limited to the following: electrospinning, forcespinning, meltspinning, pneumatospinning, blowspinning, melt-electrowriting, melt extrusion, wet extrusion, fused deposition, liquid crystal deposition, electrochemical alignment, drawing, spinning, knitting, weaving, braiding, powder bed fusion (laser sintering), vat photopolymerization (stereolithography), binder jetting, directed energy deposition, self-assembly (for example, fibrillogenesis), and hybrid approaches. This document is intended to address fibers made by any of these methods, although electrospun fibers are addressed in greater detail in some sections.

1.3This guide will focus on constructs made of fibers wherein the average fiber diameter is within the range of approximately 100 nm to 100 µm.

1.4For the purposes of this standard, a “fiber-based construct” is defined as a construct composed of slender, elongated filaments.

1.5Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Guide
Pages
23
PublisherName
American Society for Testing and Materials
Status
Current

ASTM D 4496 : 2021 : EDT 1 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM C 1559 : 2015 : R2021 Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
ASTM F 2477 : 2019 Standard Test Methods for <emph type="bdit">in vitro</emph> Pulsatile Durability Testing of Vascular Stents
ASTM F 3036 : 2021 Standard Guide for Testing Absorbable Stents
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1876 : 2008 : R2023 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM F 2952 : 2022 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM F 1983 : 2023 Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications
ASTM D 3418 : 2021 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 2256/D2256M : 2010 : R2015 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1559 : 2015 Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 1621 : 2016 : R2023 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D 257 : 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM F 3089 : 2014 Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
ASTM F 2606 : 2008 : R2021 Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM F 2529 : 2013 : R2021 Standard Guide for  <emph type="ital"> in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1621 : 2016 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM E 96/E96M : 2023 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1876 : 2008 : R2015 : EDT 1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM E 96/E96M : 2024 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM F 2791 : 2015 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
ASTM D 3418 : 2015 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 6797 : 2015 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024)
ASTM D 1894 : 2014 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
ASTM D 3786/D3786M : 2018 : R2023 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM F 2952 : 2014 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
ASTM D 3786/D3786M : 2018 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM F 2664 : 2019 : EDT 1 Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
ASTM D 2256/D2256M : 2021 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM F 2477 : 2023 Standard Test Methods for <emph type="ital"> in vitro</emph> Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM F 2791 : 2024 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
ASTM F 3369 : 2019 : EDT 1 Standard Guide for Assessing the Skeletal Myoblast Phenotype
ASTM F 2606 : 2008 : R2014 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM D 1388 : 2018 Standard Test Method for Stiffness of Fabrics
ASTM F 3106 : 2022 Standard Guide for <emph type="bdit"> in vitro</emph> Osteoblast Differentiation Assays
ASTM F 2529 : 2013 Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
ASTM F 3036 : 2013 Standard Guide for Testing Absorbable Stents
ASTM D 695 : 2015 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 4496 : 2021 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM F 1983 : 2014 Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications
ASTM D 1623 : 2017 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM F 3106 : 2014 Standard Guide for <emph type="bdit">in vitro</emph> Osteoblast Differentiation Assays
ASTM D 1623 : 2017 : R2023 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM F 2997 : 2021 Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis
ASTM D 854 : 2023 Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method
ASTM D 695 : 2023 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM F 2997 : 2013 Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis
ASTM D 257 : 2014 : R2021 : EDT 1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 6539 : 2013 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)
ASTM F 3089 : 2023 Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
ASTM D 1388 : 2023 Standard Test Method for Stiffness of Fabrics
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics

View more information
US$90.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.