Standard Specification for Nonferrous Nuts for General Use

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-01-2018

Publisher

American Society for Testing and Materials

1.1This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications.

1.2Applicable bolts, cap screws, and studs for use with nuts covered by this specification are covered by Specification F468.

1.3The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1:This specification is the inch-pound companion to Specification F467M; therefore, no SI equivalents are presented in the specification.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	F 16
DocumentType	Standard
Pages	10
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM F 467 : 2013 : EDT 2

ASTM E 1409 : 2013	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E 92 : 2023	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM F 606/F606M : 2019	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM E 29 : 2013 : R2019	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 3951 : 1998	Standard Practice for Commercial Packaging
ASTM E 18 : 2022	Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 29 : 2002	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 1409 : 2013 : R2021	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E 354 : 2021	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 53 : 1998	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM B 574 : 2023	Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
ASTM B 154 : 2016	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM E 18 : 2020	Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM D 3951 : 2015	Standard Practice for Commercial Packaging
ASTM B 574 : 2018	Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM D 3951 : 2018	Standard Practice for Commercial Packaging
ASTM F 468 : 2016	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM E 92 : 2017	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM F 468 : 2023	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM D 3951 : 2018 : R2023	Standard Practice for Commercial Packaging
ASTM E 53 : 2007 : R2013	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022)
ASTM E 101 : 1991	Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)
ASTM E 354 : 2021 : EDT 1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 227 : 1990 : R1996	Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
ASTM E 18 : 2019	Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 478 : 2008 : R2017	Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM F 1470 : 2018	Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1470 : 2001	Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E 92 : 1982 : R2003 : EDT 2	Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010)
ASTM E 354 : 2014	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM F 1470 : 2019	Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1470 : 2024	Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E 1409 : 1997	Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 55 : 2023	Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E 38 : 1985	Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
ASTM E 55 : 2011 : R2017	Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM F 606/F606M : 2021	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 468 : 2022	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM B 154 : 2016 : R2022	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM E 55 : 2011 : R2022 : EDT 1	Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E 29 : 2022	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications