ASTM G 190 : 2015
Current
Current
The latest, up-to-date edition.
Standard Guide for Developing and Selecting Wear Tests (Withdrawn 2021)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-12-2019
CONTAINED IN VOL. 03.02, 2015 Defines general information for the development and selection of a wear test for an intended application.
1.1This guide covers general information for the development and selection of a wear test for an intended application.
| Committee |
G 02
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM E 2789 : 2010 | Standard Guide for Fretting Fatigue Testing |
| ASTM E 2789 : 2010 : R2015 | Standard Guide for Fretting Fatigue Testing |
| ASTM D 2266 : 2001 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM D 3704 : 1996 : R2012 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM G 98 : 2017 : REDLINE | Standard Test Method for Galling Resistance of Materials |
| ASTM D 2670 : 1995 : R2016 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 3702 : 1994 : R2009 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
| ASTM G 32 : 2016 : REDLINE | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 65 : 2000 | Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
| ASTM D 2266 : 2001 : R2015 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM G 119 : 2009 : R2021 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM D 4170 : 2010 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 2714 : 1994 : R1998 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 181 : 2021 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| ASTM D 3704 : 1996 : R2001 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 3704 : 1996 : R2017 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 2670 : 1995 : R2004 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 2714 : 1994 : R2014 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 132 : 1996 | Standard Test Method for Pin Abrasion Testing |
| ASTM G 56 : 2010-05 | TEST METHOD FOR ABRASIVENESS OF INK-IMPREGNATED FABRIC PRINTER RIBBONS AND OTHER WEB MATERIALS |
| ASTM D 4170 : 1997 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 3702 : 1994 : R1999 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 4172 : 1994 : R2010 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 32 : 2016 : R2021 : EDT 1 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 118 : 1996 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases |
| ASTM D 2266 : 2001 : R2008 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM G 77 : 2017 : REDLINE | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test |
| ASTM D 2714 : 1994 : R2003 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM D 2714 : 1994 : R2009 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM F 732 : 2017 : REDLINE | Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| ASTM D 3702 : 1994 : R2019 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 4170 : 2016 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 2714 : 1994 : R2019 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 119 : 1993 : R1998 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 4172 : 2018 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 117 : 1998 | Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests |
| ASTM D 4172 : 1994 : R2004 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 134 : 1995 : R2001 : EDT 1 | Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet |
| ASTM D 4172 : 1994 : R2016 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 99 : 2017 : REDLINE | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
| ASTM D 4172 : 1994 : R2004 : EDT 1 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM D 3704 : 1996 : R2006 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM G 133 : 1995 | Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear |
| ASTM D 4172 : 1994 : R1999 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM D 3702 : 1994 : R2014 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 75 : 2015 : REDLINE | Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) |
| ASTM G 76 : 2013-07 | TEST METHOD FOR CONDUCTING EROSION TESTS BY SOLID PARTICLE IMPINGEMENT USING GAS JETS |
| ASTM G 119 : 2009 : R2016 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM D 2670 : 1995 : R2010 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM G 83 : 1996 | Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005) |
| ASTM G 181 : 2011 : R2017 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| ASTM G 32 : 2016 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM D 3702 : 1994 : R2004 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 2266 : 1991 : R1996 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM D 3704 : 1996 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 2670 : 2019 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 2670 : 1995 : R1999 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.