Name: BIS IS 1239-1 : 2004 AMD 5 2017
Brand: BIS

STEEL TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS - SPECIFICATION - PART 1: STEEL TUBES

Published date

01-12-2013

Publisher

Bureau of Indian Standards

FOREWORD
1. SCOPE
2. REFERENCES
3. TERMINOLOGY
4. DESIGNATION
5. SUPPLY OF MATERIALS
6. MANUFACTURE
7. CHEMICAL COMPOSITION
8. DIMENSIONS
9. TOLERANCES ON THICKNESS AND MASS
10. JOINTS
11. LENGTHS
12. GALVANIZING
13. LEAK PROOF TEST
14. TEST ON TUBES
15. WORKMANSHIP
16. SAMPLING FOR TUBES
17. MARKING
18. PROTECTION AND PACKING
ANNEX A - MAXIMUM PERMISSIBLE PRESSURE AND
          TEMPERATURE FOR TUBES FOR CONVEYING
          STEAM
ANNEX B - EDDY CURRENT TESTING OF TUBES AS AN
          ALTERNATIVE TO THE HYDRAULIC LEAK
          TIGHTNESS TEST

Specifies the requirements for welded and seamless plain end or screwed and socketed steel tubes intended for use for water, non-hazardous gas, air and steam.

Committee	MTD 9
DocumentType	Standard
PublisherName	Bureau of Indian Standards
Status	Current

BIS IS 16176 : 2014	RATCHET PIPE THREADER FOR TAPER PIPE THREADS (R-SERIES) - SPECIFICATION
BIS IS 16144 : 2014	FOODGRAIN STORAGE GODOWNS - CODE OF PRACTICE
BIS IS 14106 : 1996(R2017)	DIRECT ACTION HANDPUMPS - SPECIFICATION
BIS IS 16093 : 2013	INSTALLATION OF GAS BASED INSTANTANEOUS WATER HEATER - CODE OF PRACTICE
BIS IS 1161 : 2014	STEEL TUBES FOR STRUCTURAL PURPOSES - SPECIFICATION
BIS IS 1239-2 : 2011 AMD 1 2012	STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS
BIS IS 6044-1 : 2013	LIQUEFIED PETROLEUM GAS STORAGE INSTALLATIONS - CODE OF PRACTICE - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL CYLINDER INSTALLATIONS
BIS IS 13404 : 2012(R2017)	POWER TROWEL - GENERAL REQUIREMENTS
BIS IS 15947-2 : 2012(R2017)	CONCRETE DELIVERY PIPELINES - PART 2: GENERAL REQUIREMENTS FOR PIPELINE ACCESSORIES
BIS IS 6044-2 : 2001(R2012)	CODE OF PRACTICE FOR LIQUEFIED PETROLEUM GAS STORAGE INSTALLATIONS - PART 2: COMMERCIAL, INDUSTRIAL AND DOMESTIC BULK STORAGE INSTALLATIONS
BIS IS 16088 : 2012	CHLORINATED POLYVINYL CHLORIDE (CPVC) PIPES FOR AUTOMATIC SPRINKLER FIRE EXTINGUISHING SYSTEM - SPECIFICATION
BIS IS 13039 : 2014	EXTERNAL HYDRANT SYSTEMS - PROVISION AND MAINTENANCE - CODE OF PRACTICE
BIS IS 3177 : 1999(R2004)	CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES

BIS IS 2328 : 2005	METALLIC MATERIALS - TUBE - FLATTENING TEST
BIS IS 4711 : 1974(R2002)	METHODS FOR SAMPLING OF STEEL PIPES, TUBES AND FITTINGS
BIS IS 10748 : 2004(R2014)	HOT-ROLLED STEEL STRIP FOR WELDED TUBES AND PIPES - SPECIFICATION
BIS IS 4740 : 1979(R2003)	CODE OF PRACTICE FOR PACKAGING OF STEEL TUBES
BIS IS 2329 : 1985(R2001)	METHOD FOR BEND TEST ON METALLIC TUBES (IN FULL SECTION)
BIS IS 8999 : 2003	PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS - VERIFICATION BY MEANS OF LIMIT GAUGES
BIS IS 554 : 1999 AMD 1 2009	PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION
BIS IS 513 : 2008 AMD 2 2016	COLD REDUCED LOW CARBON STEEL SHEET AND STRIP
BIS IS 228 : 1959	METHODS OF CHEMICAL ANALYSIS OF PIG IRON, CAST IRON AND PLAIN CARBON AND LOW ALLOY STEEL
BIS IS 12278 : 2011	METALLIC MATERIALS - TUBE - RING TENSILE TEST
BIS IS 1239-2 : 2011 AMD 1 2012	STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS
BIS IS 1608 : 2005	METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
BIS IS 1387 : 1993(R2003)	GENERAL REQUIREMENTS FOR THE SUPPLY OF METALLURGICAL MATERIALS
BIS IS 4736 : 1986(R2015)	SPECIFICATION FOR HOT-DIP ZINC COATINGS ON MILD STEEL TUBES