Name: BIS IS 1865 : 1991(R2005)
Brand: BIS

IRON CASTINGS WITH SPHEROIDAL OR NODULAR GRAPHITE - SPECIFICATION

Published date

01-12-2013

Publisher

Bureau of Indian Standards

FOREWORD
1 SCOPE
2 REFERENCES
3 GRADES
4 SUPPLY OF MATERIALS
5 MANUFACTURE
6 WORKMANSHIP AND FINISH
7 HEAT TREATMENT
8 FREEDOM FROM DEFECTS
9 MICRO STRUCTURE
10 TEST SAMPLES AND TEST PIECES
11 SAMPLING AND MECHANICAL TESTS
12 MECHANICAL PROPERTIES
13 TESTS
14 VALIDITY OF TESTS
15 RETEST
16 ADDITIONAL TEST
17 MARKING
ANNEX A - CLASSIFICATION AS A FUNCTION OF HARDNESS

Specifies grades and the requirements of iron casting with spheroidal or nodular graphite classified on the basis of: a) mechanical properties measured on test pieces prepared from separately-cast test samples, and b) mechanical properties measured on test pieces prepared from cast-on test samples.

Committee	MTD 6
DocumentType	Standard
PublisherName	Bureau of Indian Standards
Status	Current

BIS IS 16176 : 2014	RATCHET PIPE THREADER FOR TAPER PIPE THREADS (R-SERIES) - SPECIFICATION
BIS IS 9338 : 2013	CAST IRON/S.G. IRON/CAST STEEL SCREW-DOWN STOP VALVES FOR WATER WORKS PURPOSES - SPECIFICATION
BIS IS 5312-1 : 2004(R2009)	SWING CHECK TYPE REFLUX (NON-RETURN) VALVES FOR WATER WORKS PURPOSES - SPECIFICATION - PART 1: SINGLE-DOOR PATTERN
BIS IS 13197 : 1991(R2009)	GROOVED PIPE COUPLINGS - SPECIFICATION
BIS IS 13655 : 1993(R2000)	GUIDELINES FOR HEAT TREATMENT OF CAST IRON
BIS IS 16045 : 2013	COPPER ALLOY SCREW - DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATION - SPECIFICATION
BIS IS 15998 : 2013	CAST IRON, SPHEROIDAL/NODULAR CAST IRON AND CAST STEEL SCREW-DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATIONS - SPECIFICATION
BIS IS 2486-1 : 1993(R2003)	METAL FITTINGS OF INSULATORS FOR OVERHEAD POWER LINES WITH NOMINAL VOLTAGE GREATER THAN 1000 V - SPECIFICATION - PART 1: GENERAL REQUIREMENTS AND TESTS
BIS IS 14846 : 2000 AMD 3 2010	SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) - SPECIFICATION

BIS IS 8350 : 1977(R2005)	DEVIATIONS FOR UNTOLERANCED DIMENSIONS OF SPHEROIDAL OR NODULAR GRAPHITE IRON CASTINGS
BIS IS 1757 : 1988(R2009)	METHOD FOR CHARPY IMPACT TEST (V-NOTCH) FOR METALLIC MATERIAL
BIS IS 1500 : 2005	METHOD FOR BRINELL HARDNESS TEST FOR METALLIC MATERIALS
BIS IS 7754 : 1975(R2003)	METHOD FOR DESIGNATION OF MICROSTRUCTURE OF GRAPHITE IN CAST IRON
BIS IS 1608 : 2005	METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
BIS IS 1387 : 1993(R2003)	GENERAL REQUIREMENTS FOR THE SUPPLY OF METALLURGICAL MATERIALS