BIS IS 325 : 1996 AMD 3 2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
07-30-2017
01-12-2013
FOREWORD
1 SCOPE
2 REFERENCE STANDARDS
3 TERMINOLOGY
4 SITE CONDITIONS
5 ENCLOSURES
6 COOLING
7 MATERIALS
8 RATED CONDITIONS OF VOLTAGE, FREQUENCY AND OUTPUT
OF MOTORS
9 TYPE OF DUTY AND CLASS OF RATING
10 DIMENSIONS, FRAME NUMBER AND OUTPUT RELATIONSHIP
11 PROVISION FOR EARTHING
12 PERFORMANCE VALUES
13 OVERLOAD
14 TEMPERATURE RISE
15 LIMITS OF VIBRATION SEVERITY
16 LIMITS OF NOISE LEVELS
17 EFFICIENCY AND POWER FACTOR
18 TOLERANCE
19 TERMINAL BOX AND TERMINAL MARKINGS
20 MARKING
21 INFORMATION TO BE GIVEN AT THE STAGE OF ENQUIRY AND
PLACING ORDER FOR SUPPLY
22 TESTS
23 PERFORMANCE TESTS
24 HIGH VOLTAGE TEST
25 INSULATION-RESISTANCE TEST
26 OVERSPEED TEST
27 TEST ON INSULATION SYSTEM
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - INFORMATION TO BE GIVEN AT THE STAGE OF ENQUIRY
AND PLACING ORDER
ANNEX C - FORM FOR TYPE TEST REPORT OF THREE PHASE
INDUCTION MOTOR
Describes the three-phase induction motors for voltage up to and including 11000 V and having windings with Class A to Class H insulation.
| Committee |
ETD 15
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Withdrawn
|
| BIS IS 10386-11 : 2012 | SAFETY CODE FOR CONSTRUCTION, OPERATION AND MAINTENANCE OF RIVER VALLEY PROJECTS - PART 11: UNDERGROUND EXCAVATION |
| IS 2370 : 2014 | WALK-IN COLD ROOMS - SPECIFICATION |
| BIS IS 10096-1-2 : 2014 | RECOMMENDATIONS FOR INSPECTION, TESTING AND MAINTENANCE OF RADIAL GATES AND ROPE DRUM HOISTS - PART 1: INSPECTION, TESTING AND ASSEMBLY AT THE MANUFACTURING STAGE - SECTION 2: ROPE DRUM HOISTS |
| BIS IS 302-2-209 : 1994(R2015) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS - SECTION 209: LOW SPEED FOOD GRINDING MACHINES |
| BIS IS 8789 : 1996(R2017) | VALUES OF PERFORMANCE CHARACTERISTICS FOR THREE-PHASE INDUCTION MOTORS |
| BIS IS 13404 : 2012(R2017) | POWER TROWEL - GENERAL REQUIREMENTS |
| BIS IS 12941 : 1990 | CODE OF PRACTICE FOR SELECTION AND USE OF SUPER CAPACITY BUCKET ELEVATOR |
| BIS IS 1474 : 1959(R2009) | SPECIFICATION FOR COMMERCIAL REFRIGERATORS |
| BIS IS 9222-1 : 1990(R2016) | RECOMMENDATIONS FOR HANDING AND DOSING DEVICES FOR CHEMICALS FOR WATER TREATMENT - PART 1: COAGULANTS |
| BIS IS 302-1 : 2008 AMD 3 2014 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BIS IS 5456 : 2006 AMD 1 2017 | TESTING OF POSITIVE DISPLACEMENT TYPE AIR COMPRESSORS AND EXHAUSTERS - CODE OF PRACTICE |
| BIS IS 15419 : 2004 | JIB CRANES - CODE OF PRACTICE |
| BIS IS 12466 : 2012(R2017) | BUILDER'S HOIST - GENERAL REQUIREMENTS |
| BIS IS 16590 : 2017 | WATER COOLED CHILLING PACKAGES USING THE VAPOUR COMPRESSION CYCLE - SPECIFICATION |
| BIS IS 3177 : 1999(R2004) | CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES |
| BIS IS/IEC 60079-7 : 2006 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| BIS IS 12075 : 2008 | MECHANICAL VIBRATION OF ROTATING ELECTRICAL MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
| BIS IS 13947-4-1 : 1993(R2004) | SPECIFICATION FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR STARTERS |
| BIS IS 8223 : 1999(R2004) | DIMENSIONS AND OUTPUT SERIES FOR ROTATING ELECTRICAL MACHINES |
| BIS IS 8544-4 : 1979 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 4: REDUCED VOLTAGE AC STARTERS - TWO STEP AUTO-TRANSFORMER STARTERS |
| BIS IS 3855-3 : 1978 | RECTANGULAR AND SQUARE ENAMELLED COPPER CONDUCTORS - PART 3: WIRES WITH HIGH MECHANICAL PROPERTIES |
| BIS IS 6457 : 1972(R2001) | SPECIFICATION FOR SINGLE ROW CYLINDRICAL ROLLER BEARINGS |
| BIS IS 3855-2 : 1979 | RECTANGULAR AND SQUARE ENAMELLED COPPER CONDUCTORS - PART 2: METHODS OF TESTS |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| BIS IS 4889 : 1968(R2017) | METHODS OF DETERMINATION OF EFFICIENCY OF ROTATING ELECTRICAL MACHINES |
| BIS IS 1271 : 2012 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| BIS IS 2223 : 1983(R2017) | DIMENSIONS OF FLANGE MOUNTED AC INDUCTION MOTORS |
| BIS IS 2254 : 1985(R2017) | DIMENSIONS OF VERTICAL SHAFT MOTORS FOR PUMPS |
| BIS IS 1076-2 : 1985(R2016) | PREFERRED NUMBERS - PART 2: GUIDE TO THE USE OF PREFERRED NUMBERS AND SERIES OF PREFERRED NUMBERS |
| IEC 60050-411:1996 | International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
| BIS IS 1076-3 : 1985(R2016) | PREFERRED NUMBERS - PART 3: GUIDE TO THE CHOICE OF SERIES OF PREFERRED NUMBERS AND OF SERIES CONTAINING MORE ROUNDED VALUES OF PREFERRED NUMBERS |
| BIS IS 1231 : 1974(R2008) | DIMENSIONS OF THREE-PHASE FOOT-MOUNTED INDUCTION MOTORS |
| BIS IS 12661-1 : 1988(R2005) | HIGH VOLTAGE MOTOR-STARTER - PART 1: DIRECT-ON-LINE (FULL VOLTAGE) AC STARTERS |
| BIS IS 12065 : 1987(R2009) | PERMISSIBLE LIMITS OF NOISE LEVELS FOR ROTATING ELECTRICAL MACHINES |
| BIS IS 12360 : 1988(R2015) | VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS INCLUDING PREFERRED VOLTAGES AND FREQUENCY |
| BIS IS 4722 : 2001(R2006) | ROTATING ELECTRICAL MACHINES - SPECIFICATION |
| BIS IS 6455 : 1972(R2001) | SPECIFICATION FOR SINGLE ROW RADIAL BALL BEARINGS |
| BIS IS 8544-1 : 1977 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 1: DIRECTION LINE AC STARTERS |
| BIS IS 3855-5 : 1984 | RECTANGULAR AND SQUARE ENAMELLED COPPER CONDUCTORS - PART 5: WIRES WITH TEMPERATURE INDEX 180 |
| BIS IS 3855-1 : 1978 | RECTANGULAR AND SQUARE ENAMELLED COPPER CONDUCTORS - PART 1: THICKNESS OF ENAMEL COATING |
| BIS IS 12824 : 1989(R2004) | TYPE OF DUTY AND CLASSES OF RATING ASSIGNED TO ROTATING ELECTRICAL MACHINES |
| BIS IS 3855-4 : 1981 | RECTANGULAR AND SQUARE ENAMELLED COPPER CONDUCTORS - PART 4: WIRES WITH TEMPERATURE INDEX 155 |
| IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
| BIS IS 1076-1 : 1985(R2016) | PREFERRED NUMBERS - PART 1: SERIES OF PREFERRED NUMBERS |
| BIS IS 3043 : 1987(R2016) | CODE OF PRACTICE FOR EARTHING |
| BIS IS 8544-2 : 1977 AMD 1 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 2: STAR-DELTA STARTERS |
| BIS IS 4029 : 2010(R2016) | GUIDE FOR TESTING THREE-PHASE INDUCTION MOTORS |
| BIS IS 996 : 2009 AMD 1 2011 | SINGLE PHASE A.C. INDUCTION MOTORS FOR GENERAL PURPOSE |
| BIS IS 8544-3-2 : 1979 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 3: RHEOSTATIC MOTOR STARTERS - SECTION 2: ADDITIONAL REQUIREMENTS FOR AC RHEOSTATIC MOTOR CONTROLLERS |
| BIS IS 4800-5 : 1968 | ENAMELLED ROUND WINDING WIRES - PART 5: WIRES FOR ELEVATED TEMPERATURES |
| BIS IS 1885-35 : 1993(R2004) | ELECTROTECHNICAL VOCABULARY - PART 35: ROTATING MACHINES |
| BIS IS 900 : 1992(R2003) | CODE OF PRACTICE FOR INSTALLATION AND MAINTENANCE OF INDUCTION MOTORS |
| BIS IS 4728 : 1975(R2002) | TERMINAL MARKINGS AND DIRECTION OF ROTATION FOR ROTATING ELECTRICAL MACHINERY |
| BIS IS 4691 : 1985(R2004) | DEGREES OF PROTECTION PROVIDED BY ENCLOSURE FOR ROTATING ELECTRICAL MACHINERY |
| BIS IS 8544-3-1 : 1979 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 3: RHEOSTATIC MOTOR STARTERS - SECTION 1: GENERAL REQUIREMENTS |
| BIS IS 12802 : 1989(R2004) | TEMPERATURE-RISE MEASUREMENTS OF ROTATING ELECTRICAL MACHINES |
| BIS IS 6362 : 1995(R2017) | DESIGNATION OF METHODS OF COOLING OF ROTATING ELECTRICAL MACHINES |
| BIS IS 8789 : 1996(R2017) | VALUES OF PERFORMANCE CHARACTERISTICS FOR THREE-PHASE INDUCTION MOTORS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.