• There are no items in your cart

BIS IS/IEC 62271-200 : 2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UPTO AND INCLUDING 52 KV
Superseded date

11-17-2023

Published date

01-12-2013

NATIONAL FOREWORD
1. General
2. Normal and special service conditions
3. Terms and definitions
4. Ratings
5. Design and construction
6. Type tests
7. Routine tests
8. Guide to the selection of metal-enclosed
    switchgear and controlgear for service
9. Information to be given with enquiries,
    tenders and orders
10. Rules for transport, storage, installation,
    operation and maintenance
11. Safety
Annex A (normative) - Internal fault - Method for
     testing the metal-enclosed switchgear and
        controlgear under conditions of arcing due
        to an internal fault
Annex B (normative) - Partial discharge measurement
Annex C (informative) - Explanatory notes
Bibliography

Describes requirements for factory-assembled metal-enclosed switchgear and controlgear for alternating current of rated voltages above 1 kV and up to and including 52 kV for indoor and outdoor installation, and for service frequencies up to and including 60 Hz.

DevelopmentNote
Issue Date: 01/09/2008. (02/2009)
DocumentType
Standard
PublisherName
Bureau of Indian Standards
Status
Superseded
SupersededBy

Standards Relationship
IEC 62271-200:2011 Identical

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
BIS IS 12063 : 1987(R2004) CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES OF ELECTRICAL EQUIPMENT
BIS IS 1885-74 : 2012(R2017) ELECTROTECHNICAL VOCABULARY - PART 74: ELECTRICAL AND MAGNETIC DEVICES
BIS IS 14659 : 1999(R2004) A.C. INSULATION-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 38 KV
BIS IS 6209 : 1982(R2006) METHODS FOR PARTIAL DISCHARGE MEASUREMENTS
IEC 60724:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
BIS IS 2071-1 : 2016 HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
IEC 62271-105:2012 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
BIS IS/IEC 60470 : 2000 HIGH-VOLTAGE SWITCHGEAR ALTERNATING CURRENT CONTACTORS AND CONTACTOR-BASED MOTOR STARTERS
IEC 60470:1999 High-voltage alternating current contactors and contactor-based motor-starters
BIS IS/ISO/IEC GUIDE 51 : 2005 GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS
IEC 60517:1990 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60137:2017 Insulated bushings for alternating voltages above 1000 V
BIS IS 13234 : 1992(R2017) GUIDE FOR SHORT-CIRCUIT CURRENT CALCULATION IN THREE-PHASE A.C. SYSTEMS
BIS IS 1885-17 : 1979(R2017) ELECTROTECHNICAL VOCABULARY - PART 17: SWITCHGEAR AND CONTROLGEAR
BIS IS 2584 : 1963(R2001) METHOD OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS AT POWER FREQUENCIES
IEEE C37.20.7-2007 REDLINE IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
BIS IS 12729 : 2004 COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
BIS IS/IEC 62271-102 : 2003 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
EN 50187 : 96 AC 96 GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.