• There are no items in your cart

BS 1363-2(1995) : 1995

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS
Available format(s)

Hardcopy , PDF

Superseded date

08-17-2020

Language(s)

English

Published date

01-01-1995

Committees responsible
Foreword
1 Scope
2 Conditions of use
3 Terms and definitions
4 General
5 General conditions for type testing
6 Classification
7 Marking and labelling
8 Clearances, creepage distances and solid insulation
9 Accessibility of live parts
10 Provision for earthing
11 Terminals and terminations
12 (Not used)
13 Construction of socket-outlets
14 Resistance to ageing and to humidity
15 Insulation resistance and electric strength
16 Temperature rise
17 Breaking capacity of socket-outlets
18 Normal operation of socket-outlets
19 Connection of flexible cords and cord anchorage
20 Mechanical strength
21 Screws, current-carrying parts and connections
22 Resistance to heat
23 Resistance to abnormal heat and fire
24 Resistance to excessive residual stresses and to
   rusting
25 (Not used)
Annex A (normative) - The construction and calibration
         of a calibrated link
Annex B (normative) - Measurement of clearances and
         creepage distances
Annex C (normative) - Determination of the Comparative
         Tracking index (CTI) and Proof Tracking Index (PTI)
Annex D (normative) - Relation between rated impulse
         withstand voltage, rated voltage and Overvoltage
         Category
Annex E (normative) - Pollution degree
Annex F (normative) - Impulse voltage test
Annex G (normative) - Test plug for temperature-rise test
Annex H (informative) - Specific structure of BS EN 50525
        and its derivation from British Standards and
        from HD 21 and HD 22
List of references

Defines requirement for 13 A switched and unswitched shuttered socket-outlets for household, commercial and light industrial purposes, with particular reference to safety in normal use.

Committee
PEL/23
DevelopmentNote
Together with BS 1363-1(1995), it supersedes BS 1363(1984) Supersedes 02/203987 DC, 91/20733 DC and 96/208500 DC (10/2003) Supersedes 06/30156712 DC. (01/2008) 1995 version along with its amendments remain current & will be withdrawn on 31/05/2015. 1995 Edition Re-Issued in May 2012 & incorporates AMD 4 2012. Supersedes 11/30203494 DC. (05/2012)
DocumentType
Standard
Pages
68
PublisherName
British Standards Institution
Status
Superseded
Supersedes

BS 1363-5:2008 13 A plugs, socket-outlets, adaptors and connection units Specification for fused conversion plugs
BS 6173:2009 Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
EN 62606:2013/A1:2017 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017)
HD 60364-5-559:2012/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
04/30089457 DC : DRAFT APR 2004 BS 5656-2 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS - SELECTION, INSTALLATION AND LOCATION OF NEW ESCALATORS AND MOVING WALKS
BS 5656-2:2004 Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks Code of practice for the selection, installation and location of new escalators and moving walks
BS 1363-4(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
BS 5546:2000 Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kW
BS 1363-3(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 3: SPECIFICATION FOR ADAPTORS
BS 6896:2005 Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
15/30297238 DC : 0 BS 1363-4 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
14/30270861 DC : 0 BS 4163 - HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN EDUCATIONAL AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
BS DD222(1996) : 1996 SPECIFICATION FOR RACK AND PINION LIFTS
CEI EN 62606 : 2014 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
15/30297232 DC : 0 BS 1363-1 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
I.S. EN 61009-1:2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
I.S. HD 60364-5-559:2012 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS (IEC 60364-5-55:2011 (MOD))
BS 1363-1(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
S.R. HD 60364-5-559:2012 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
BS 6396(2008) : 2008 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION
BS 6396:2008+A1:2015 Electrical systems in office furniture and educational furniture. Specification
BS 6396:2002 Electrical systems in office furniture and office screens. Specification
BS 5655-6:2002 Lifts and service lifts Code of practice for the selection and installation of new lifts
BS 5655-6:2011 Lifts and service lifts Code of practice for the selection, installation and location of new lifts
I.S. EN 62606:2013 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
15/30297240 DC : 0 BS 1363-5 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 5: SPECIFICATION FOR FUSED CONVERSION PLUGS
11/30229088 DC : 0 BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS
08/30177004 DC : DRAFT JULY 2008 BS 6396 - ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION
IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
BS EN 62606:2013 General requirements for arc fault detection devices
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules
BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
BS 4163:2007 HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN SCHOOLS AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
BS 4163:2014 Health and safety for design and technology in educational and similar establishments. Code of practice
UNE-HD 60364-5-559:2013 Low-voltage electrical installations - Part 5-559: Selection and erection of electrical equipment - Luminaires and lighting installations

BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS 1210:1963 Specification for wood screws
BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
BS EN 60695-10-2:2014 Fire hazard testing Abnormal heat. Ball pressure test method
BS 6004:2000 Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS 5901:1980 Method of test for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
BS 4662:1970 Specification for boxes for the enclosure of electrical accessories
BS EN 61032:1998 Protection of persons and equipment by enclosures. Probes for verification
BS EN 60112 : 2003 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
BS 1363-1(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
BS EN 50075:1991 Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
BS 1363-4(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
BS EN 61180-1:1995 High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements
BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
BS 1362:1973 Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs)

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.