BS 1580-1&2(1962) : 1962
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-31-2007
English
01-01-1962
Covers UNC,UNF & UNEF (coarse, fine and extra fine thread series), and standard constant pitch series for an adjusted system of diameter/pitch combinations.Covers essential and design forms,and sets out,in table form,primary measurements,limits and tolerances for all diameter/pitch combinations in those 4 series.Sets out bases of tolerances for Unified screw threads;sets out 5 sizes with diameter less than 1/4in for attachment and general applications.Arises from negotiations involving UK,USA and Canada. Conforms with relevant sections of US standard ASA B1.1 - 1960.
Committee |
GME/9
|
DevelopmentNote |
Supersedes BS 1580(1953) (07/2004)
|
DocumentType |
Standard
|
Pages |
124
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
AS B133-1963 | Identical |
BS 3041-12:1981 | Radio-frequency connectors Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF) |
DEFSTAN 02-862(PT2)/2(2007) : 2007 | FASTENERS - PART 2: FERROUS |
DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
DEFSTAN 47-30/1(1997) : 1997 | HOSE, COUPLINGS AND HOSE ASSEMBLIES FOR SUCTION AND DISCHARGE PURPOSES |
DEFSTAN 02-862(PT1)/2(2007) : 2007 | FASTENERS - PART 1: GENERAL |
DEFSTAN 00-970(PT1)SEC4/4(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT A/C - SECTION 4: DESIGN AND CONSTRUCTION |
BS 4019-4:1993 | Rotary core drilling equipment. Specification for System A. Inch units |
DEFSTAN 02-862(PT4)/2(2007) : 2007 | FASTENERS - PART 4: FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
BS AU 50-2.5c:1996 | Tyres and wheels. Wheels and rims Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars |
DEFSTAN 02-862(PT1)/1(2000) : 2000 | FASTENERS - PART 1: GENERAL |
BS 4019-3:1993 | Rotary core drilling equipment Specification for System A. Metric units |
PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
ISO 3551-2:1992 | Rotary core diamond drilling equipment — System A — Part 2: Inch units |
BS 949-2:1992 | Screwing taps Specification for unified ground thread taps. Manufacturing tolerances |
BS 949-2:1979 | Screwing taps Taps for Unified threads (and for the obsolescent threads of Whitworth and BA forms) |
BS 6038:1980 | Specification for high-voltage cable plug and socket connections for medical X-ray equipment |
BS 3A 212:1993 | Specification for cadmium-plated steel bolts, 55/65 tonf/in<sup>2</sup> (Unified hexagons, 3A Unified threads and close tolerance shanks) |
DEFSTAN 02-862(PT2)/1(2000) : 2000 | FASTENERS - PART 2: FERROUS |
BS 890:1972 | Specification for building limes |
DEFSTAN 00-970(PT1)SEC4/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 4: DESIGN AND CONSTRUCTION |
DEFSTAN 02-862(PT5)/2(2007) : 2007 | FASTENERS - PART 5: NON-FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
BS 949-1:1992 | Screwing taps Specification of general dimensions |
BS 4278:1984 | Specification for eyebolts for lifting purposes |
BS 5306-2:1990 | Fire extinguishing installations and equipment on premises Specification for sprinkler systems |
BS 5156:1985 | Specification for diaphragm valves |
BS 1981:1991 | Specification for unified machine screws and machine screw nuts |
BS 1157:1975 | Recommendations for tapping drill sizes for use with fluted taps |
BS 855:1990 | Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW) |
BS 1768:1963 | Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series |
DEFSTAN 02-862(PT3)/2(2007) : 2007 | FASTENERS - PART 3: NON-FERROUS FASTENERS |
BS 6463-3:1987 | Quicklime, hydrated lime and natural calcium carbonate Methods of test for physical properties of quicklime |
BS 2000-12(1982) : 1982 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS |
BS 1127-5:1990 | Screwing dies and dienuts Specification for dimensions of hexagon dienuts |
BS 3G 100-2.1:1973 | Specification for general requirements for equipment for use in aircraft. All equipment Construction |
BS 2A 122; 2A 123; 2A 124:1981 | Specification for clinch nuts (Unified threads) for aircraft |
BS 949-1:1976 | Screwing taps Specification for taps for ISO metric threads |
BS 3934-1:1992 | Mechanical standardization of semiconductor devices Recommendations for the preparation of drawings of semiconductor devices |
BS 10:1962 | Specification for flanges and bolting for pipes, valves, and fittings |
PD ISO/TR 11364:2012 | Gas cylinders. Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
BS EN 31253:1996 | Lasers and laser-related equipment. Laser device. Mechanical interfaces |
BS 5188:1990 | Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases |
BS 4791:1985 | Specification for calorimeter bombs |
DEFSTAN 66-2(PT2)/1(2005) : 2005 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
BS 4A113(1999) : 1999 | AEROSPACE SERIES - SPECIFICATION FOR CADMIUM-PLATED, MUSHROOM-HEADED, UNIFIED-THREAD, SLOTTED DRIVE BOLTS |
BS 1580-3:1965 | Specification for Unified screw threads Diameters below ¼ in |
DEFSTAN 00-970(PT7)SEC4/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 4: DETAIL DESIGN AND STRENGTH OF MATERIALS |
BS 3580:1964 | Guide to design considerations on the strength of screw threads |
BS 6463-4:1987 | Quicklime, hydrated lime and natural calcium carbonate Methods of test for physical properties of hydrated lime and lime putty |
BS 6463-103:1999 | Quicklime, hydrated lime and natural calcium carbonate Methods for physical testing |
BS 826:1978 | Specification for steel single tier bolted shelving (angle upright type) |
BS 5590:1978 | Specification for screw thread metric series measuring cylinders |
BS 7670-1:1993 | Steel nuts and bolts for resistance projection welding. Specification for dimensions and properties |
BS EN 122200:1995 | Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC |
ISO/TR 11364:2012 | Gas cylinders Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
BS 7711-1:1994 | Respiratory therapy equipment Specification for tubing and connectors |
BS 5359:1976 | Specification for magnetic eleven-disk packs for data processing. Mechanical and magnetic properties |
BS 6913-1:1989 | Operation and maintenance of earth-moving machinery Guide to common maintenance and adjustment service tools |
BS 6913-10:1994 | Operation and maintenance of earth-moving machinery Specification for drain, fizz and level plugs |
BS 7417:1991 | Specification for interface dimensions of flat face \'O\'-ring seal hydraulic couplings |
ISO 3551-1:1992 | Rotary core diamond drilling equipment — System A — Part 1: Metric units |
BS 5796:1987 | Specification for drain fill and level plugs for earth-moving machinery |
BS 5329:1988 | Specification for non-refillable metallic containers up to 1.4 litres capacity filled with liquefied petroleum gases |
BS 1750(1961) : LATEST | BOLTING FOR THE PETROLEUM INDUSTRY |
BS 3139-1:1959 | Specification for high strength friction grip bolts for structural engineering. General grade bolts |
BS 3382-1&2(1961) : 1961 | SPECIFICATION FOR ELECTROPLATED COATINGS ON THREADED COMPONENTS - CADMIUM ON STEEL COMPONENTS - ZINC ON STEEL COMPONENTS |
BS 3580:1964 | Guide to design considerations on the strength of screw threads |
BS 1769:1951 | Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series |
BS 93:1951 | Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A. |
BS 919-1:1960 | Specification for screw gauge limits and tolerances Gauges for screw threads of Unified form |
BS 2708(1956) : LATEST | UNIFIED BLACK SQUARE AND HEXAGON BOLTS, SCREWS AND NUTS (UNC AND UNF THREADS) - NORMAL SERIES |
BS 84:1956 | Specification for parallel screw threads of Whitworth form |
BS 768:1958 | Specification for slotted grub screws |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.