BS 2011-2.1Ca:1977
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Environmental testing. Tests Test Ca. Damp heat, steady state
Available format(s)
Hardcopy , PDF
Superseded date
03-01-2004
Language(s)
English
Published date
08-31-1977
Publisher
NO CONTENTS SECTION
Continuous test at a steady temperature of 40°C and a relative humidity of 93%. Standard test duration from 4 to 56 days.
| Committee |
GEL/104
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IEC 60068-2-3:1969 | Identical |
| BS EN 60249-1:1993 | Base materials for printed circuits Base materials for printed circuits. Test methods |
| BS QC 222000:1996 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms. (Type TNC) |
| BS QC 300000:1983 | Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Generic specification |
| BS 7573-1.1(1992) : 1992 AMD 8338 | METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - GENERAL |
| DEFSTAN 61-12(PT0)/1(1992) : 1992 | WIRES CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 0: GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL - GENERIC SPECIFICATION |
| NES 2048 : ISSUE 1 | SPECIFICATION FOR POSITIVE TEMPERATURE COEFFICIENT THERMISTORS FOR THERMAL PROTECTION OF ELECTRIC MOTORS |
| BS 5625:1980 | Specification of purchasing requirements and methods of test for fluxes for soft soldering |
| BS 6796:1986 | Specification for flickermeters |
| BS 6447:1984 | Specification for absolute and gauge pressure transmitters with electrical outputs |
| DEFSTAN 44-2(PT2)/4(1993) : 1993 | DESICCANT CONTAINERS, DEHUMIDIFIER - PART 2: GENERAL AND TEST REQUIREMENTS |
| BS 5917:1980 | Specification for conformal coating material for use on printed circuit assemblies |
| BS 6167:1981 | Specification for battery-operated electric fence controllers not suitable for connection to the supply mains |
| BS 123100-003:2001 | System of quality assessment. Capability detail specification. Rigid single-sided and double-sided printed boards with plain holes |
| DEFSTAN 80-152/2(1999) : 1999 | PAINT, SYSTEM, EPOXIDE, STOVING - TYPES: SEMI-GLOSS - GLOSS |
| DEFSTAN 22-48/2(2001) : 2001 | SPECIFICATION FOR POSITIVE TEMPERATURE COEFFICIENT THERMISTORS FOR THERMAL PROTECTION OF ELECTRIC MOTORS |
| BS 5839-2:1983 | Fire detection and alarm systems for buildings Specification for manual call points |
| BS EN 119000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units |
| BS EN 116000-3:1996 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays Test and measurement procedures |
| DEFSTAN 34-4/2(1990) : 1990 | FLUXES FOR SOFT SOLDERING ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| BS CECC 20000:1983 | Harmonized system of quality assessment for electronic components: generic specification: semiconductor optoelectronic and liquid crystal devices |
| BS QC 160000-1:1987 | Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relays Test and measurement procedures |
| BS 4584-15:1978 | Metal-clad base materials for printed wiring boards Adhesive coated polymeric films: PETP-F-15 and PI-F-15 |
| BS QC 221300:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (Type SMB) |
| BS 6160-1:1981 | Methods of measurement for radio equipment used in the mobile services General definitions and standard conditions of measurement |
| BS EN 129000:1996 | Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors |
| BS 6221-11:1991 | Printed wiring boards Specification for flex-rigid multilayer printed boards with through connections |
| BS QC 221200:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (Type BNC) |
| BS QC 420000:1992 | Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification |
| BS 6201-1:1982 | Fixed capacitors for use in electronic equipment Methods of test |
| BS EN 137000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| BS EN 61249-8-7:1997 | Materials for interconnection structures. Sectional specification set for non-conductive films and coatings Marking legend inks |
| BS 5786-1:1979 | Variable capacitors Methods of test |
| BS QC 390000:1992 | Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification |
| BS 4584-9:1977 | Specification for metal-clad base materials for printed circuits Flexible copper-clad polyester (PETP) film: PETP-F-Cu-9 |
| BS QC 221400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (Type SMC) |
| BS EN 117000:1997 | Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test |
| DEFSTAN 44-2(PT2)/5(2004) : 2004 | DESICCANT CONTAINERS, DEHUMIDIFIER - PART 2: GENERAL AND TEST REQUIREMENTS |
| BS 4017:1979 | Specification for capacitors for use in tubular fluorescent, high pressure mercury and low pressure sodium vapour discharge lamp circuits |
| BS EN 29104:1993 | Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| BS 6160-1:1989 | Radio equipment used in mobile services General requirements and conditions of measurement |
| BS 2011-2.1T:1981 | Environmental testing. Tests Test T. Soldering |
| BS CECC 63000:1990 | Harmonized system of quality assessment for electronic components. Generic specification: film and hybrid integrated circuits |
| BS CECC 63000:1985 | Harmonized system of quality assessment for electronic components: generic specification: film and hybrid integrated circuits |
| BS 5772-6:1984 | Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Climatic tests and soldering tests |
| BS 9450:1998 | Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test |
| BS 3041-1:1977 | Radio-frequency connectors Specification for general requirements and measuring methods |
| BS 4584-10:1977 | Specification for metal-clad base materials for printed circuits Flexible copper-clad polyimide film: PI-F-Cu-10 |
| DEFSTAN 80-60/3(1998) : 1998 | PAINT, SYSTEM, STOVING, HAMMER, FINISH, SPRAYING |
| BS 9215:1986 | Specification for capability approval of custom-built radio frequency connector/cable assemblies: generic specification |
| BS 123700-003:2001 | System of quality assessment. Capability detail specification. Flex-rigid double-sided printed boards with through-connections |
| BS EN 61011:1993 | Electric fence energizers. Safety requirements for mains-operated electric fence energizers |
| BS 2632:1980 | Specification for mains-operated electric fence controllers |
| BS 5267:1976 | Specification. Capacitors for single phase a.c. motors |
| BS 5839-5:1988 | Fire detection and alarm systems for buildings Specification for optical beam smoke detectors |
| BS 5275(1976) : LATEST | ENVIRONMENTAL TESTING OF OPTICAL DEVICES AND SYSTEMS |
| BS 5839-4:1988 | Fire detection and alarm systems for buildings Specification for control and indicating equipment |
| BS 9610:1982 | Specification for quartz crystal units of assessed quality: generic data and methods of test |
| BS 9764:1988 | Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connections and with or without rigidizing component materials |
| BS 9761:1988 | Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes |
| BS 6221-2:1991 | Printed wiring boards Methods of test |
| BS 9500:1990 | Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test |
| BS 9763:1988 | Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes |
| BS 9765:1988 | Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or without rigidizing component materials |
| BS 9600:1983 | Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test |
| BS 9762:1988 | Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes |
| BS EN 186000-1:1994 | Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables Requirements, test methods and qualification approval procedures |
| BS 4584-103.3:1992 | Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits Specification for permanent polymer coating materials (solder resist) for use in the fabrication of printed boards |
| BS QC 410000:1990 | Harmonized system of quality assessment for electronic components: potentiometers for use in electronic equipment |
| BS 9400:1970 | Specification for integrated electronic circuits and micro-assemblies of assessed quality (qualification approval procedures): generic data and methods of test |
| BS QC420100(1992) : 1992 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRIC COMPONENTS - VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - SECTIONAL SPECIFICATION FOR SURGE SUPPRESSION VARISTORS |
| BS 9940-0:1983 | Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment Generic specification |
| BS EN 60068-2-52:1996 | Environmental testing. Test methods Tests. Test Kb. Salt mist cyclic (sodium chloride solution) |
| BS QC 222400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions |
| BS EN 61249-5-4:1997 | Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings Conductive inks |
| BS EN 123800:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections |
| BS QC 760000:1990 | Harmonized system of quality assessment for electronic components. Film and hybrid film integrated circuits. Generic specification |
| BS EN 134000:1995 | Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval) |
| BS EN 60868:1993 | Flickermeter. Functional and design specifications |
| BS QC 221100:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (Type SMA) |
| BS EN 123600:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections |
| BS 6174:1982 | Specification for differential pressure transmitters with electrical outputs |
| BS 6221-9:1991 | Printed wiring boards Specification for flexible multilayer boards with through connections |
| BS 123600-003:2001 | System of quality assessment. Capability detail specification. Flex-rigid multilayer printed boards with through-connections |
| BS 123200-003:2001 | System of quality assessment. Capability detail specification. Rigid double-sided printed boards with plated-through holes |
| BS 123300-003:2001 | System of quality assessment. Capability detail specification. Rigid multilayer printed boards |
| EN 29104 : 1993 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
| BS 6096-1:1981 | Marking inks and solder resist coating materials for printed circuits Methods of test |
| BS 6688:1986 | Method for specifying requirements for low voltage power supplies, switching type, d.c. output |
| BS 6369:1983 | Specification for battery-operated electric fence controllers suitable for connection to the supply mains |
| BS 9930-0(1983) : AMD 5955 | SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT OF ELECTRONIC COMPONENTS - FIXED CAPACITORS FOR USE IN ELECTRONIC COMPONENTS - GENERIC SPECIFICATION |
| BS EN 60491:1997 | Safety requirements for electronic flash apparatus for photographic purposes |
| BS QC 400000:1990 | Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment: generic specification |
| BS 6221-10:1991 | Printed wiring boards Specification for flex-rigid double-sided printed boards with through connections |
| BS 7822-3:1995 | Insulation coordination for equipment within low-voltage systems Use of coatings to achieve insulation coordination of printed board assemblies |
| BS DD158(1987) : 1987 | FILTERS FOR MAINS SIGNALLING SYSTEMS |
| BS EN 123700:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections |
| BS 5558-1:1989 | Controllers with analogue signals for use in industrial-process control systems Methods of evaluating the performance |
| BS 9766:1983 | Specification for printed circuits of assessed quality: sectional specification for multilayer flexi-rigid printed circuits with through hole connections |
| BS 3192:1979 | Specification for safety requirements for radio (including television) transmitting equipment |
| BS 415:1990 | Specification for safety requirements for mains-operated electronic and related apparatus for household and similar general use |
| BS 2011-2.2C & D:1981 | Environmental testing. Guidance Tests C & D. Guidance for damp heat tests |
US$143.74
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.