BS 2X 32:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification for pre-treatment etch primer for aerospace purposes
Hardcopy , PDF
04-01-2020
English
02-16-2006
Committees responsible
Foreword
1 Scope
2 References
3 Definitions
4 Materials
5 Performance
6 Batch inspection
7 Marking
Annex A (normative) - Type approval
Annex B (normative) - Preparation of test panels
List of references
Defines requirements for the materials and performance of a water resistant, two pack pretreatment etch primer for aerospace applications, to be used on metallic substrates for provision of adhesion for an anti-corrosive primer and finishing scheme.
Committee |
ACE/65
|
DevelopmentNote |
Supersedes 96/705058 DC and BS X32(1991) (07/2005) Supersedes 05/30138965 DC. (02/2006) Reviewed and confirmed by BSI, December 2009. (11/2009)
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DEFSTAN 03-32(PT3)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 80-25/5(2009) : 2009 | PAINT, AMMUNITION FINISHING, STOVING SPRAYING AND DIPPING - TYPES: SEMI-GLOSS, MATT |
DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 03-032(PT6)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
DEFSTAN 03-32(PT5)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
SAE AMS 03-2 : 2017 | CLEANING AND PREPARATION OF METAL SURFACES |
DEFSTAN 03-032(PT3)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-32(PT3)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-32(PT6)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
DEFSTAN 03-32(PT1)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 03-2/6(2011) : 2011 | CLEANING AND PREPARATION OF METAL SURFACES |
DEFSTAN 03-2/4(2005) : 2005 | CLEANING AND PREPARATION OF METAL SURFACES |
DEFSTAN 03-032(PT5)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-32(PT4)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
DEFSTAN 03-32(PT1)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 03-2/5(2009) : 2009 | CLEANING AND PREPARATION OF METAL SURFACES |
DEFSTAN 03-32(PT5)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS, EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
BS EN 605:1992 | Paints and varnishes. Standard panels for testing |
BS EN ISO 1513:1995 | Paints and varnishes. Examination and preparation of samples for testing |
BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
BS 2X 34:1998 | Specification for two component polyurethane finish for aerospace purposes |
BS EN 23270:1991 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
BS 3900-H2:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of blistering |
BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
BS EN 21512:1994 | Methods of test for paints. Sampling |
BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
DEFSTAN 79-17/1(1994) : INTERIM | COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES |
BS 3900-H4:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of cracking |
DEFSTAN 79-17/2(1998) : 1998 | COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES |
BS EN ISO 1520:2006 | Paints and varnishes. Cupping test |
BS 282; 389:1963 | Specifications for lead chromes and zinc chromes for paints |
BS EN 29117:1992 | Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
BS L 163:1978 | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
BS EN 2334:1997 | Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
BS 2X 33:1998 | Specification for two component epoxy primer for aerospace purposes |
BS EN 3665:1997 | Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys |
BS 3900-H5:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of flaking |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.