BS 6001-1(1999) : 1999
Current
Current
The latest, up-to-date edition.
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-1999
Publisher
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Expression of non-conformity
5 Acceptance quality limit (AQL)
6 Submission of product for sampling
7 Acceptance and non-acceptance
8 Drawing of samples
9 Normal, tightened and reduced inspection
10 Sampling plans
11 Determination of acceptability
12 Further information
13 Fractional acceptance number plans for single
sampling (optional)
Annex A (informative) - Example for non-constant sampling plan
Bibliography
Defines an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL).
| Committee |
SS/5
|
| DevelopmentNote |
Supersedes BS 6001-1(1991). (11/1999) Also numbered as ISO 2859-1. (09/2001) Supersedes 94/408416 DC. (06/2004) 1999 Edition Re-Issued in July 2011 and incorporates AMD 1 2011. Supersedes 10/30219542 DC. (07/2011)
|
| DocumentType |
Standard
|
| Pages |
96
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 61-21 SUPP042/3(2011) : 2011 | GENERAL SPECIFICATION FOR BATTERIES - SUPPLEMENT 042: SEALED LEAD ACID BATTERY 12 V 110AH (MINIMUM) NSN 6140-99-219-2903 NSN 6140-99-690-6632 |
| DEFSTAN 61-21 SUPP042/2(2009) : 2009 | GENERAL SPECIFICATION FOR BATTERIES - SUPPLEMENT 042: SEALED LEAD ACID BATTERY 12 V 110AH (MINIMUM) NSN 6140-99-219-2903 |
| DEFSTAN 59-35(PT7)/1(1995) : 1995 | CONNECTORS, ELECTRICAL - PART 7: 13 A ALL-INSULATED SEALED TYPES |
| BS CECC 90000:1991 | Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits |
| BS 6001-0:1996 | Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system |
| BS QC 160100:1987 | Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays |
| BS 7656(1993) : 1993 | SPECIFICATION FOR LOW-VOLTAGE POLE-MOUNTING FUSES (CUT-OUTS) - 400 A RATING |
| DEFSTAN 02-860/1(2010) : 2010 | REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF PORTABLE FIRE EXTINGUISHERS |
| DEFSTAN 05-58(PT0)/1(2006) : 2006 | GUIDE TO DEFENCE STANDARD 05-58 PART 1: SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES OF ISOLATED LOTS |
| DEFSTAN 05-101(PT2)/1(2005) : 2005 | PROOF OF ORDNANCE, MUNITIONS, ARMOUR AND EXPLOSIVES - PART 2: GUIDANCE |
| DEFSTAN 05-71(PT2)/1(2006) : 2006 | ACCEPTANCE SAMPLING PROCEDURES FOR PROOF WITH RESPECT TO RECTANGULAR REFERENCE TARGETS - PART 2: ACCURACY PROOF - SINGLE SAMPLING PLANS FOR INDEPENDENT DISTURBANCES IN AZIMUTH AND ELEVATION |
| BS IEC 60747-10:1991 | Semiconductor devices Generic specification for discrete devices and integrated circuits |
| DEFSTAN 05-71(PT1)/2(2006) : 2006 | ACCEPTANCE SAMPLING PROCEDURES FOR PROOF WITH RESPECT TO RECTANGULAR REFERENCE TARGETS - PART 1: CONSISTENCY PROOF - SINGLE SAMPLING PLANS FOR INDEPENDENT DISTURBANCES IN AZIMUTH AND ELEVATION |
| SBAC TS 220 : 1 | TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
| BS CECC 30500:1989 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current |
| BS EN 61037:1993 | Electricity metering. Tarriff and load control. Particular requirements for electronic ripple control receivers |
| BS 3704(1996) : 1996 | NATURAL RUBBER LATEX MALE CONDOMS |
| BS EN 168101:1997 | Harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal units (capability approval) |
| BS EN 60983:1996 | Specification for miniature lamps |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| BS 6002-2:2007 | Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| BS EN 829:1997 | In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests |
| BS 6001-3:1993 | Sampling procedures for inspection by attributes Specification for skip-lot procedures |
| BS EN 2583:1997 | Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/650°C. Technical specification |
| BS EN 61038:1993 | Specification for time switches for tariff and load control |
| BS EN 27787-3:1994 | Specification for dental rotary instruments. Cutters Carbide laboratory cutters for milling machines |
| BS 6002-4.1:1994 | Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
| BS 5391-1:2006 | Acrylonitrile-butadiene-styrene (ABS) pressure pipe Specification |
| BS 123200:2001 | System of quality assessment. Sectional specification. Rigid double-sided printed boards with plated-through holes |
| BS 6002-3:2005 | Sampling procedures for inspection by variables Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| BS 5911-103:1994 | Precast concrete pipes, fittings and ancillary products Specification for prestressed non-pressure pipes and fittings with flexible joints |
| BS 7459-1:1995 | Rotating sprinklers for irrigation equipment Specification for design and operational requirements |
| BS EN ISO 12017:1996 | Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods |
| BS 6001-4:1994 | Sampling procedures for inspection by attributes Specification for sequential sampling plans |
| BS 7029-1:1993 | Method of specifying thermoplastics injection mouldings General requirements |
| BS EN 117000:1997 | Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test |
| BS 1139-2.1:1991 | Metal scaffolding. Couplers Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes |
| BS 4778-2:1991 | Quality vocabulary Quality concepts and related definitions |
| BS 6001-9:2002 | Sampling procedures for inspection by attributes Double sampling plans using minimal sample sizes, indexed by producer\'s risk quality (PRQ) and consumer\'s risk quality (CRQ) |
| BS 8442:2006 | Miscellaneous road traffic signs and devices. Requirements and test methods |
| BS 6001-7:2001 | Sampling procedures for inspection by attributes Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection |
| BS QC 300701:1993 | Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. Assessment level E |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ASTM E 3060 : 2016 | Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy |
| BS CECC 30501:1993 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed metallized polycarbonate film dielectric capacitors for direct current |
| BS 123100:2001 | System of quality assessment. Sectional specification. Rigid single-sided and double-sided printed boards with plain holes |
| BS 6002-1:1993 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection |
| BS 5392-1:2006 | Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe Specification |
| BS 8537:2010 | Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes |
| BS 691:1987 | Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem) |
| BS 123500:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards with through-connections |
| BS 123700:2001 | System of quality assessment. Sectional specification. Flex-rigid double-sided printed boards with through-connections |
| BS 8417:2003 | Preservation of timber. Recommendations |
| BS 9120:1988 | Specification for radio interference suppression filters of assessed quality: generic data and methods of test |
| BS 123600:2001 | System of quality assessment. Sectional specification. Flex-rigid multilayer printed boards with through-connections |
| BS EN 120007:1993 | Harmonized system of quality assessment for electronic components. Blank detail specification. Liquid crystal displays. Monochrome LCDs without electronic circuit |
| BS 123000:2001 | System of quality assessment. Generic specification. Printed boards |
| BS 5911-200:1994 | Precast concrete pipes, fittings and ancillary products Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
| BS 1615:1987 | Method for specifying anodic oxidation coatings on aluminium and its alloys |
| BS QC 400600:1990 | Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed surface mounting (chip) resistors |
| BS EN 600:1996 | Natural rubber latex male condoms |
| BS EN 116200:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Electromechanical all-or-nothing relays (including relays for severe environmental conditions) |
| BS CECC 30800:1991 | Harmonized system of quality assessment for electronic components. Sectional specification: tantalum surface mounting capacitors |
| BS 123300:2001 | System of quality assessment. Sectional specification. Rigid multilayer printed boards |
| BS 8408:2005 | Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification |
| BS 7114-2:1988 | Fireworks Specification for fireworks |
| BS 6SP 4(2000) : 2000 | AEROSPACE SERIES - PINS HEADED, PLAIN SHANK, DRILLED, STEEL ALLOY AND CORROSION RESISTING STEEL WITH A STRENGTH CLASS 880 MPA |
| BS EN 120001:1993 | Harmonized system of quality assessment for electronic components. Blank detail specification. Light emitting diodes, light emitting diode arrays, light emitting diode displays without internal logic and resistor |
| BS 123400:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections |
| BS CECC 31501:1988 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic capacitors of dielectric class 2 for electrical shock hazard protection |
| SBAC TS 145 : 4 | TECHNICAL SPECIFICATION NO. TS145 - MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS) HEAT RESISTING ALLOY STEEL FV535, CLASSIFICATION RM >= 1000 MPA (145,000 LBF/IN[2]) @ TA/+550 DEGREES C |
| BS EN 123000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: printed boards |
| BS 6000-1:2005 | Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots General guide to acceptance sampling |
| BS CECC 30202:1988 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2) |
| BS CECC 16000-1:1992 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General |
| BS A101(1969) : 1969 | GENERAL REQUIREMENTS FOR TITANIUM BOLTS |
| BS 123800:2001 | System of quality assessment. Sectional specification. Flexible multilayer printed boards with through-connections |
| BS 6001-2:1993 | Sampling procedures for inspection by attributes Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 24153:2009 | Random sampling and randomization procedures |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
US$335.40
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.