EN 29002 : 1994
|
QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN PRODUCTION & INSTALLATION
|
EN 29003 : 1994
|
QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION & TEST
|
ASTM D 3093 : 1972 : R1992
|
Test Method for Pickup Efficiency of Residual Aerosol Insecticides (Withdrawn 1999)
|
BS 3496:1989
|
Specification for E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems
|
BS 2782-1 Method 121A and 121B:1991
|
Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress
|
BS 2782-1 Method 121C:1992
|
Methods of testing plastics. Thermal properties Determination of temperature of deflection under a bending stress for rigid thermosetting resin bonded laminated plastics sheet
|
BS 3974-1:1974
|
Specification for pipe supports Pipe hangers, slider and roller type supports
|
BS 6464:1984
|
Specification for reinforced plastics pipes, fittings and joints for process plants
|
BS 3974-2:1978
|
Specification for pipe supports Pipe clamps, cages, cantilevers and attachments to beams
|
ISO 161-1:1996
|
Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series
|
ASME B31.3:2016
|
PROCESS PIPING
|
BS 5750-2:1987
|
Quality systems Specification for production and installation
|
BS 2782-10:Method 1002:1977
|
Methods of testing plastics. Glass reinforced plastics Determination of loss on ignition
|
BS 4994:1987
|
Specification for design and construction of vessels and tanks in reinforced plastics
|
DIN 1259-1:2001-09
|
GLASS - PART 1: TERMINOLOGY FOR GLASS TYPES AND GROUPS
|
BS 8301:1985
|
Code of practice for building drainage
|
BS 4346-1:1969
|
Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
|
BS CP3:CH5-2(1972) : AMD 7908
|
CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - WIND LOADS
|
BS 3757:1978
|
Specification for rigid PVC sheet
|
ISO 2078:1993
|
Textile glass Yarns Designation
|
BS 2782-1 Methods 121A to 121C:1976
|
Methods of testing plastics. Thermal properties Determination of temperature of deflection under a bending stress of 1.8 MPa, of plastics and ebonite. Determination of temperature of deflection under a bending stress of 0.45 MPa, of plastics and ebonite. Determination of temperature of deflection under a bending stress, of rigid thermosetting resin bonded laminated sheet
|
BS CP312-2(1973) : 1973 AMD 2337
|
CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - UNPLASTICIZED PVC PIPEWORK FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE
|
BS 5750-3:1987
|
Quality systems Specification for final inspection and test
|
BS 8010-2.5:1989
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Glass reinforced thermosetting plastics
|
BS 5480-1:1977
|
Specification for glass fibre reinforced plastics (GRP) pipes and fittings for use for water supply or sewerage Dimensions, materials and classification
|
BS 5750-1:1987
|
Quality systems Specification for design/development, production, installation and servicing
|
BS 3293:1960
|
Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
|
ASTM D 2992 : 2012
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
EN 29001 : 1994
|
QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN DESIGN/DEVELOPMENT, PRODUCTION, INSTALLATION & SERVICING
|
BS 3447:1962
|
Glossary of terms used in the glass industry
|
BS 5480-2:1982
|
Specification for glass fibre reinforced plastics (GRP) pipes and fittings for use for water supply or sewerage Design and performance requirements
|
EN 29000 : 1987
|
QUALITY MANAGEMENT & QUALITY ASSURANCE STANDARDS - GUIDELINES FOR SELECTION AND USE
|
BS 2782-10:Method 1005:1977
|
Methods of testing plastics. Glass reinforced plastics Determination of flexural properties. Three point method
|
BS 1755-1:1982
|
Glossary of terms used in the plastics industry Polymer and plastics technology
|