• There are no items in your cart

BS 7825-3.11:1998

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Calibration of rubber and plastics test equipment. Calibration schedules Rubber polymer identification and chemical properties
Available format(s)

Hardcopy , PDF

Withdrawn date

09-27-2012

Language(s)

English

Published date

11-15-1998

Committees responsible
Foreword
1 Scope
2 Normative references
3 Definitions
4 Inspection
5 Schedules
6 Calibration schedules for individual test methods
Table 1 - BS 7164-3:1992
Table 2 - ISO 2454:1995
Table 3 - BS ISO 3865:1997
Table 4 - BS 6630:1985
Table 5 - BS 4181-1:1985
Table 6 - BS 7164-2.2:1990
Table 7 - ISO 5478:1990
Table 8 - BS 7164-7.1:1990
Table 9 - BS 7164-29.1:1992
Table 10 - BS 7164-30.1:1997
Table 11 - BS 7164-28.1:1997
Table 12 - BS 7164-26.1:1997
Table 13 - BS 7164-27.1:1991
Table 14 - BS 7164-23.1:1993
Table 15 - ISO 6528-2:1992
Table 16 - ISO 6528-3:1988
Table 17 - ISO 7270:1987
Table 18 - BS 7164-22.2:1992
Table 19 - BS 7164-28.2:1995
Table 20 - BS 7164-25:1996
Table 21 - BS 7164-4:1990

Gives schedules for the calibration of and apparatus and equipment used for the identification of rubber polymers and the determination of their chemical properties and constituents.

Committee
PRI/22
DevelopmentNote
Supersedes 94/307321 DC (07/2004) Inactive for the new design. (06/2007)
DocumentType
Standard
Pages
34
PublisherName
British Standards Institution
Status
Withdrawn
Supersedes

BS 7164-7.1:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content Polyisoprene content
BS 903-A54:1989 Physical testing of rubber Methods for exposure to artificial light, for use in determining resistance to weathering
BS 7164-5:1991 Chemical tests for raw and vulcanized rubber Methods for determination of ash content
BS 1752:1983 Specification for laboratory sintered or fritted filters including porosity grading
ISO 5478:2006 Rubber Determination of styrene content Nitration method
ISO 1772:1975 Laboratory crucibles in porcelain and silica
BS 7164-22.2:1992 Chemical tests for raw and vulcanized rubber. Determination of chlorine content Oxygen flask combustion technique for determination of bromine and chlorine
BS 7164-29.1:1992 Chemical tests for raw and vulcanized rubber. Methods for determination of zinc content Atomic absorption spectrometry
ISO 648:2008 Laboratory glassware — Single-volume pipettes
ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
ISO 7270:1987 Rubber Identification of polymers (single polymers and blends) Pyrolytic gas chromatographic method
ISO 6528-3:1988 Rubber Determination of total sulfur content Part 3: Furnace combustion method
BS 7164-27.1:1991 Chemical tests for raw and vulcanized rubber. Methods for determination of iron content Atomic absorption spectrometry
BS 903-A64:1995 Physical testing of rubber Method for the preparation, mixing and vulcanization of rubber test mixes
ISO 385-1:1984 Laboratory glassware — Burettes — Part 1: General requirements
ISO 2454:1995 Rubber products — Determination of zinc content — EDTA titrimetric method
BS 6630:1985 Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 7164-23.1:1993 Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content Oxygen combustion flask method
ISO Guide 30:2015 Reference materials Selected terms and definitions
PD 6461-1:1995 General metrology Basic and general terms (VIM)
BS 7164-2.2:1990 Chemical tests for raw and vulcanized rubber. Sample preparation Vulcanized rubber
BS 4181-1:1985 Identification of rubbers by infra-red spectrometry Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated polyethylene rubbers
BS EN ISO 658:2002 Oilseeds. Determination of content of impurities
BS 7164-26.1(1990) : 1990 CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF MANGANESE CONTENT - ATOMIC ABSORPTION SPECTROMETRY
ISO 6528-2:1992 Rubber Determination of total sulfur content Part 2: Sodium peroxide fusion method
BS 7164-3:1992 Chemical tests for raw and vulcanized rubber Methods for determination of solvent extract
BS EN 30012-1:1994 Quality assurance requirements for measuring equipment. Metrological confirmation system for measuring equipment
BS 7164-4:1990 Chemical tests for raw and vulcanized rubber Methods for dissolution of rubber by acid digestion
BS 6057-3.19:1986 Rubber latices. Methods of test Determination of total bound styrene content of reinforced styrene-butadiene rubber latices
BS ISO 3865:2005 Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material

View more information
US$237.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.