Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

BS 7870-8.5:2003

Current
Current

The latest, up-to-date edition.

LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-16-2003

Publisher

British Standards Institution

Foreword
1 Scope
2 Normative references
3 Voltage designation
4 Conductors
5 Insulation
6 Identification of cores
7 Assembly of cores, fillers and binders
8 Bedding layer (optional for unarmoured cables)
9 Armouring
10 Oversheath
11 Marking
12 Dimensions
13 Tests
14 Routine tests
15 Sample tests
16 Type test
Annex A (informative) Guide to use
Bibliography

Defines requirements for the construction, dimensions and mechanical and physical properties of multicore cables with thermosetting insulation and non-halogenated sheaths, having reduced fire propagation performance, and low emission of smoke when affected by fire.

This section of BS 7870 specifies requirements for the construction, dimensions and mechanical and physical properties of multicore cables with thermosetting insulation and non-halogenated sheaths, having reduced fire propagation performance, and low emission of smoke when affected by fire.

It specifies requirements for:

  1. steel wire armoured multicore cables (2-core to 48-core) having copper conductors;
  2. unarmoured multicore cables (2-core to 48-core) having copper conductors.

It specifies requirements for both Type 1 and Type 2 cables, which are defined as follows:

  • Type 1: cable designed for the installation and operating conditions prevailing in a conventional fossil-fuelled power station or equivalent location;
  • Type 2: cable designed for the installation and operating conditions prevailing in a PWR power station, but excluding location in or around the containment area.

The requirements specified in this section of BS 7870 are applicable to both Type 1 and Type 2 cables unless otherwise indicated.

This section of BS 7870 is applicable to cables for use in and around power stations and other installations having similar cable densities.

NOTE A “guide to use?? is given in Annex A.

Committee
GEL/20/16
DevelopmentNote
Supersedes 99/244662 DC To be read in conjunction with BS 7870-1(1996) and BS 7870-2(1999). (06/2003) Reviewed and confirmed by BSI, October 2008. (09/2008)
DocumentType
Standard
Pages
28
PublisherName
British Standards Institution
Status
Current
Supersedes

HD 622 S1:1996/A2:2005 Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
HD 627 S1:1996/A2:2005 MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
BS EN 50268-2:2000 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Procedure
BS 7870-6.3:1999 LV and MV polymeric insulated cables for use by distribution and generation utilities Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath
BS EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test
HD 605 S2:2008/corrigendum:2010 ELECTRIC CABLES - ADDITIONAL TEST METHODS
HD 620 : 2010 DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV
BS EN 50267-2-1:1999 Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas
BS EN 60811-1-1:1995 Insulating and sheathing materials of electric cables. Common test methods. General application Measurement of thickness and overall dimensions. Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
BS EN 60811-1-3:1995 Insulating and sheathing materials of electric cables. Common test methods. General application Methods for determining the density. Water absorption tests. Shrinkage test
HD 603 S1:1994/A3:2007 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV
BS EN 60811-3-1:1995 Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds Pressure test at high temperature. Tests for resistance to cracking
HD 626 S1:1996/A2:2002 OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE U[O]/U(U[M]): 0,6/1 (1,2) KV
IEC 60183:2015 Guidance for the selection of high-voltage A.C. cable systems
ASTM D 5964 : 2016 : REDLINE Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
BS EN 60811-2-1:1998 Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
BS EN 50265-2-1:1999 Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures 1 kW pre-mixed flame - 1 kW pre-mixed flame
BS EN 60811-1-2:1995 Insulating and sheathing materials of electric cables. Common test methods. General application Thermal ageing methods
BS EN 60811-1-4:1995 Insulating and sheathing materials of electric cables. Common test methods. General application Tests at low temperature
HD 604 S1:1994/A3:2005 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS

View more information
US$237.18
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us