BS 871:1981
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF
07-15-2000
English
10-30-1981
Foreword
Cooperating Organizations
Specification
Section one. General
1. Scope
2. References
3. Workmanship
4. Grading
5. Marking
6. Manufacturer's certificate
Section two. Technical products
7. Sampling and testing
8. Garnet paper
9. Aluminium oxide paper
10. Aluminium oxide woodworking cloth
11. Aluminium oxide metalworking cloth
12. Silicon carbide paper
13. Silicon carbide cloth
14. Waterproof silicon carbide paper
Section three. General purpose products
15. Sampling and testing
16. Emery cloth
17. Glass paper
18. Glass cloth
Appendices
A. Grading
B. Metal removal test
C. Breaking strength test
D. Standard dimensions
E. Recommendations for the storage of surface coated
abrasives
F. Recommendations for ordering
Table
1. Grading of emery cloth abrasive grain
2. Grading of glass paper abrasive grain
Figures
1. Typical method of mounting the grain sieving
analysis testing machine
2. Testing machine
Requirements for abrasive papers and cloths for both technical and general purpose products. Appendices cover grading, metal removal test, breaking strength, dimensions, recommendations for storage and for ordering.
| Committee |
MTE/13
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| BS 6161-18:1991 | Methods of test for anodic oxidation coatings on aluminium and its alloys Determination of surface abrasion resistance |
| BS 3424-24:1990 | Testing coated fabrics Methods 27A and 27B. Methods for determination of abrasion resistance |
| BS 3202-2:1991 | Laboratory furniture and fittings Specification for performance |
| BS 6391:1983 | Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes |
| BS 5350-G3:1987 | Methods of test for adhesives Determination of ability of anaerobic adhesives to set on metal surfaces |
| BS EN 466-1:1995 | Protective clothing. Protection against liquid chemicals Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (type 3 equipment) |
| BS 7541:1992 | Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage |
| DEFSTAN 02-737/1(2000) : 2000 | PRESERVATION AND PAINTING OF MECHANICAL MACHINERY ITEMS |
| BS 903-A9:1988 | Physical testing of rubber Determination of abrasion resistance |
| BS 8204-2:1999 | Screeds, bases and in-situ floorings Concrete wearing surfaces. Code of practice |
| BS 7557:1992 | Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs |
| BS 3544:1962 | Methods of test for polyvinyl acetate adhesives for wood |
| DEFSTAN 80-117/3(2004) : 2004 | SYNTHETIC RUBBER RESIN ADHESIVE NO 7 |
| DEFSTAN 02-758/1(2000) : 2000 | REQUIREMENTS FOR WEATHERWORK PREPARATION AND PAINTING OF SURFACE SHIPS |
| 04/30111059 DC : DRAFT AUG 2004 | BS 3289 - TEXTILE CARCASE CONVEYOR BELTING FOR USE IN UNDERGROUND MINES (INCLUDING FIRE PERFORMANCE) |
| DEFSTAN 80-115/2(1999) : 1999 | ADHESIVE FOR AFFIXING PAPER LABELS TO ALUMINIUM |
| BS 6209:1982 | Specification for solvent cement for non-pressure thermoplastics pipe systems |
| DEFSTAN 80-154/3(2006) : 2006 | ADHESIVE, NATURAL RUBBER-RESIN |
| BS 1711:1975 | Specification for solid rubber flooring |
| BS 5711-22:1979 | Methods of sampling and test for glycerol Additional methods of test (non-specification) |
| ASTM D 3603 : 2015-02 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
| DEFSTAN 91-113/1(1997) : 1997 | LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: 0-1176 JOINT SERVICE DESIGNATION: OMD-90 |
| BS 4346-3:1982 | Joints and fittings for use with unplasticized PVC pressure pipes Specification for solvent cement |
| BS 5993:1994 | Specification for cricket balls |
| BS 3900-A5:1991 | Methods of test for paints Large-scale brushing tests for paints and varnishes |
| BS 7409:1996 | Specification for safety requirements for wheeled child conveyances |
| BS 3289:2005 | Textile carcase conveyor belting for use in underground mines (including fire performance). Specification |
| BS 3698:1964 | Specification for calcium plumbate priming paints |
| DEFSTAN 02-751/1(2000) : 2000 | REQUIREMENTS FOR PRESERVATION, PREPARATION AND PAINTING OF GRP SHIPS |
| DEFSTAN 80-56/3(2008) : 2008 | PAINT, STOVING FINISH FOR SMALL ARMS, BLACK, EPOXIDE, SPRAYING |
| DEFSTAN 05-50(PT25)/1(1987) : 1987 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 25: PREPARATION OF STEEL PANELS FOR TEST PURPOSES |
| BS 2000-135(1993) : 1993 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
| BS 5350-A1:1976 | Methods of test for adhesives. Adherends Adherend preparation |
| DEFSTAN 80-57/5(2004) : 2004 | ADHESIVE RUBBER RESIN NO 3 AND NO 5 |
| DEFSTAN 80-56/2(1995) : 1995 | PAINT, FINISHING EPOXIDE, STOVING, BLACK FOR SMALL ARMS, SPRAYING |
| DEFSTAN 03-28(PT2)/2(1995) : 1995 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 2: PHYSICAL VAPOUR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| BS 6366:1983 | Specification for studs for rugby football boots |
| DEFSTAN 81-93/3(2005) : 2005 | PAPER, WRAPPING GREASE-RESISTING |
| BS 7646:1993 | Specification for general purpose self-service trolleys |
| BS 3546-5:1995 | Coated fabrics for use in the manufacture of water penetration resistant clothing Specification for coated fabrics for immersion suits |
| DEFSTAN 80-148/3(2004) : 2004 | ADHESIVE, EPOXIDE, GENERAL PURPOSE |
| DEFSTAN 91-68/1(2002) : 2002 AMD 1 2005 | LUBRICATING OIL, ENGINE, SEVERE DUTY, DIESEL, LOW TEMPERATURE NATO CODE: O-1178 JOINT SERVICE DESIGNATION: OMD-55 |
| BS 3187:1978 | Specification for electrically conducting rubber flooring |
| BS 1858:2002 | Electric cables. Accessories. Bitumen-based filling compounds |
| BS 1204:1993 | Specification for type MR phenolic and aminoplastic synthetic resin adhesives for wood |
| BS 921:1976 | Specification. Rubber mats for electrical purposes |
| DEFSTAN 80-146/2(1999) : 1999 | ADHESIVE, METHYL AND ETHYL CYANOACRYLATE, TYPES 1, 2 AND 3 |
| DEFSTAN 03-28(PT1)/2(1995) : 1995 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 1: PHYSICAL VAPOUR DEPOSITION OF ALUMINIUM FOR PROTECTION AGAINST CORROSION |
| BS 6453:1984 | Specification for performance of leathers for garments |
| DEFSTAN 80-137/1(1989) : 1989 | VARNISH, ALKYD, POLYURETHANE MODIFIED, ONE-PACK, MATT AND GLOSS TYPE: BRUSHING |
| DEFSTAN 91-113/2(2007) : 2007 | LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: O-1176 JOINT SERVICE DESIGNATION: OMD-90 |
| BS 5131-1.3:1991 | Methods of test for footwear and footwear materials. Adhesives Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests |
| DEFSTAN 81-93/2(1997) : 1997 | PAPER, WRAPPING GREASE-RESISTING |
| DEFSTAN 80-57/4(1999) : 1999 | ADHESIVE RUBBER RESIN NO. 3 - ADHESIVE RUBBER RESIN NO. 5 |
| DEFSTAN 03-5/3(1995) : 1995 | AUTOCATALYTIC (ELECTROLESS) NICKEL COATING OF METALS |
| BS EN 846-13:2001 | Methods of test for ancillary components for masonry Determination of resistance to impact, abrasion and corrosion of organic coatings |
| EN 466:1995/A1:1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST LIQUID CHEMICALS - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT CONNECTIONS BETWEEN DIFFERENT PARTS OF THE CLOTHING (TYPE 3 EQUIPMENT) |
| EN 846-13:2001 | Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings |
| BS 7291-4:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement |
| DEFSTAN 03-28(PT3)/2(1997) : 1997 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 3: PHYSICAL VAPOUR DEPOSITION OF TITANIUM NITRIDE FOR SURFACE PROTECTION |
| DEFSTAN 05-50(PT57)/1(1991) : 1991 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 57: OXIDATION STABILITY OF STEAM TURBINE OILS |
| DEFSTAN 91-102/2(2000) : 2000 | LUBRICATING OIL, CORROSION PREVENTIVE, SMALL ARMS AND LIGHT CALIBER WEAPONS NATO CODE: O-157 JOINT SERVICE DESIGNATION: OX-24 |
| BS 4145:1967 | Specification for glass mica boards for electrical purposes |
| BS 2F 66:1982 | Specification for rubber bonded cork sheets |
| DEFSTAN 80-154/2(2000) : 2000 | ADHESIVE, NATURAL RUBBER-RESIN |
| BS 5117-2.1:1985 | Testing corrosion inhibiting, engine coolant concentrate (\'antifreeze\'). Methods of test for corrosion inhibition performance General procedures |
| DEFSTAN 80-63/2(1995) : 1995 | VARNISH, MARINE AND GENERAL PURPOSE, BRUSHING |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.