BS 903-0:2012
Current
The latest, up-to-date edition.
Physical testing of rubber General
Hardcopy , PDF
English
10-31-2012
Foreword
1 Scope
2 Terms and definitions
3 Normative reference
4 Reproducibility
5 Test method categories and properties
6 Usage
7 Statistical analysis
8 Analysis of graphical traces
Annexes
Annex A (informative) - List of British Standard test
methods for the physical properties of rubber
Bibliography
Provides a range of laboratory-scale methods for the physical testing of rubber in raw, unvulcanized, vulcanized and thermoplastic forms.
This part of BS903 provides a general introduction to BS903 and to BS ISO standards. It describes a range of laboratory-scale methods for the physical testing of rubber in raw, unvulcanized, vulcanized and thermoplastic forms. A list of closely-related British Standards is also provided.
NOTE The status of methods referenced need to be verified with the relevant standards body; they are continually changing as new editions are issued and new methods appear, in line with developments in technology.
Committee |
PRI/22
|
DevelopmentNote |
Supersedes BS 903-0(2003) & 11/30244285 DC. (10/2012)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Current
|
BS ISO 289-4:2003 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of the Mooney stress-relaxation rate |
BS ISO 1382:2012 | Rubber. Vocabulary |
BS ISO 4664-1:2011 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties General guidance |
ISO 1432:2013 | Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
BS ISO 27727:2008 | Rubber, vulcanized. Measurement of fatigue crack growth rate |
BS 903-A63:1995 | Physical testing of rubber Method for determination of crystallization effects by hardness measurements |
BS ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
BS ISO 815-1:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
BS ISO 8013:2012 | Rubber, vulcanized. Determination of creep in compression or shear |
BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
BS 903-A9:1988 | Physical testing of rubber Determination of abrasion resistance |
BS ISO 4662:2017 | Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
BS ISO 4666-4:2007 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
BS ISO 6505:2015 | Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals |
BS ISO 3417:2008 | Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter |
BS ISO 4664-2:2006 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties Torsion pendulum methods at low frequencies |
BS ISO 3387:2012 | Rubber. Determination of crystallization effects by hardness measurements |
BS ISO 5893:2002 | Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification |
BS 903-5:2004 | Physical testing of rubber Guide to the application of rubber testing to finite element analysis |
BS ISO 15113:2005 | Rubber. Determination of frictional properties |
BS ISO 2285:2013 | Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load |
BS ISO 48:2010 | Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
BS ISO 27588:2012 | Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
BS ISO 4665:2016 | Rubber, vulcanized or thermoplastic. Resistance to weathering |
BS ISO 23794:2015 | Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance |
BS 6716:1986 | Guide to properties and types of rubber |
BS ISO 11345:2006 | Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods |
BS 903-A45(2000) : 2000 | RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 3: REFERENCE AND ALTERNATIVE METHODS FOR DETERMINING THE OZONE CONCENTRATION IN LABORATORY TEST CHAMBERS |
BS ISO 37:2011 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
BS ISO 289-1:2015 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
BS ISO 14309:2011 | Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity |
BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
BS ISO 23529:2016 | Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
BS ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing |
BS EN 60243-2:2014 | Electric strength of insulating materials. Test methods Additional requirements for tests using direct voltage |
BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
BS ISO 4666-3:2016 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
BS ISO 6502:2016 | Rubber. Guide to the use of curemeters |
PD ISO/TR 12134:2010 | Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
BS ISO 2781 : 2008 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
BS ISO 7619-2:2004 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
BS ISO 815-2:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures |
BS EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
BS ISO 9026:2007 | Raw rubber or unvulcanized compounds. Determination of green strength |
BS ISO 18898:2016 | Rubber. Calibration and verification of hardness testers |
BS ISO 2393:2014 | Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures |
BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
ISO 289-3:2015 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR |
BS ISO 2782:2006 | Rubber, vulcanized or thermoplastic. Determination of permeability to gases |
ISO 4637:1979 | Rubber-coated fabrics Determination of rubber-to-fabric adhesion Direct tension method |
BS ISO 2921:2011 | Rubber, vulcanized. Determination of low-temperature retraction (TR test) |
BS ISO 1827:2016 | Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
BS ISO 812:2017 | Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness |
BS 903-A60.1:2000 | Physical testing of rubber. Curemetering Guide to the use of curemeters |
BS ISO 5600:2017 | Rubber. Determination of adhesion to rigid materials using conical shaped parts |
BS 903-1:1995 | Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS ISO 6943:2017 | Rubber, vulcanized. Determination of tension fatigue |
BS 903-A27:1986 | Physical testing of rubber Determination of rubber to fabric adhesion. Direct tension method |
BS ISO 6914:2013 | Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
BS ISO 1795:2017 | Rubber, raw natural and raw synthetic. Sampling and further preparative procedures |
BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
BS ISO 5603:2017 | Rubber, vulcanized. Determination of adhesion to wire cord |
BS ISO 4647:2010 | Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
BS 903-A18:1973 | Physical testing of rubber Determination of equilibrium water vapour absorption |
BS ISO 4666-1:2010 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Basic principles |
BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
BS 903-A58.1:2001 | Physical testing of rubber Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR - Determination of the Delta Mooney value for non-pigmented,oil-extended, emulsion-polymerized SBR |
BS ISO 12493:2017 | Rubber, vulcanized. Determination of stress in tension upon heating |
BS ISO 18517:2015 | Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide |
BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
ISO 3387:2012 | Rubber Determination of crystallization effects by hardness measurements |
BS ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity |
BS ISO 2007:2007 | Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method |
BS ISO 2878:2017 | Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance |
BS ISO 132:2011 | Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) |
BS ISO 813:2016 | Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
BS ISO 814:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
BS ISO 1431-3:2017 | Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
BS ISO 6133:2015 | Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
BS ISO 2930:2017 | Rubber, raw natural. Determination of plasticity retention index (PRI) |
ISO/TR 11753:1992 | Rubber and rubber products — Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests |
BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.