• There are no items in your cart

BS 903-A16:1987

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Physical testing of rubber Determination of the effect of liquids
Available format(s)

Hardcopy , PDF

Superseded date

07-15-1999

Language(s)

English

Published date

06-30-1987

National foreword
Committees responsible
Methods
0 Introduction
1 Scope and field of application
2 References
3 Test liquids
4 Time-interval between vulcanization and testing
5 Conditioning of test pieces
6 Temperature of immersion
7 Period of immersion
8 Determination of change in volume, change in mass or
    change in dimensions
9 Determination of extracted soluble matter
10 Determination of change in physical properties after
    immersion
11 Determination of change in physical properties after
    immersion and drying
12 Test with liquid on one surface only
13 Test report
Annex
A Test liquids
Tables
1 Untitled
2 Untitled
3 Untitled
4 Untitled
Figure
Apparatus for tests on one surface only

Evaluation of resistance to action of liquids by measurement of properties before and after immersion in selected test liquids.

Committee
PRI/22
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ISO 1817:2015 Identical

EN 297:1994/A2:1996/AC:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B[11] AND B[11BS] BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
DEFSTAN 91-56/2(1997) : 1997 GREASE, SILICONE, METAL TO RUBBER - NATO CODE: G-394 - JOINT SERVICE DESIGNATION: XG-315
DEFSTAN 47-2/3(1991) : 1991 AMD 1 1994 RUBBER HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS
DEFSTAN 59-97/3(1990) : AMD 1 HEAT SHRINKABLE INSULATION MATERIALS - GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR CAPABILITY APPROVAL
DEFSTAN 91-35/2(1995) : 1995 HYDRAULIC FLUID PETROLEUM, EMULSIFYING, JOINT SERVICE DESIGNATION: OX-30
BS 5120:1987 Specification for rubber hoses for gas welding and allied processes
BS EN 2261:1995 Silicone rubber (VMQ). Hardness 70 IRHD
BS 5342:1985 Specification for rubber hoses for high-pressure saturated steam
DEFSTAN 47-2/4(1997) : 1997 RUBBER HOSE AND HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS (THICK COVER)
DEFSTAN 59-15(PT1)/3(1990) : 1990 CORR ELASTOMERIC INSULATING MATERIALS AND POLYTETRAFLUOROETHYLENE (PTFE) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR QUALIFICATION APPROVAL
DEFSTAN 91-43/2(1993) : 1993 LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330
BS 903-A37:1987 Physical testing of rubber Determination of adhesion to and corrosion of metals
BS MA 16:1971 Specification for inflatable boats (manual or motor propelled)
BS EN 2260:1995 Silicone rubber (VMQ). Hardness 60 IRHD
BS EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD
BS 2751(1982) : AMD 4728 SPECIFICATION FOR ACRYLONITRILE BUTADIENE RUBBER COMPOUNDS
BS EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD
BS 3858:1992 Specification for binding and identification sleeves for use on electric cables and wires
BS AU 217-2:1989 Maximum road speed limiters for motor vehicles Specification for system and component requirements
BS 2F 67:1980 Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes
BS 4089:1966 Specification for rubber hose and hose assemblies for liquefied petroleum gas lines
BS 1435-1:1987 Rubber hose assemblies for oil suction and discharge services Specification for the assemblies
BS 7825-3.8:1998 Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties
BS 6066:1981 Specification for thermoplastics hoses for compressed air
BS 7780-4:1995 Specification for rotary shaft lip type seals Performance test procedures
BS EN 2104:1996 Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD
BS EN 2262:1995 Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD
BS EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD
BS EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD
BS F 130:1987 Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes
BS EN 2259:1995 Silicone rubber (VMQ). Hardness 50 IRHD
BS 2494:1986 Specification for elastomeric joint rings for pipework and pipelines
BS 5118:1980 Specification for rubber hoses for compressed air
BS 3158:1985 Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling
BS 7019:1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 2494:1990 Specification for elastomeric seals for joints in pipework and pipelines
BS G 246:1991 Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
BS 6847:1987 Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids
BS 7184:1989 Recommendations for selection, use and maintenance of chemical protective clothing
BS F 125:1973 Specification for rubber bonded compressed asbestos fibre jointing
BS AU 218:1987 Specification for automotive synchronous belt drives
BS 2767:1972 Specification for valves and unions for hot water radiators
BS 3558:1980 Glossary of rubber terms
BS AU 150b:1984 Specification for automotive V-belts and pulleys
BS 3905:1984 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, primarily for use in mines
BS 3395:1989 Specification for electrically bonded rubber hoses and hose assemblies for dispensing petroleum based fuels
BS 4332:1989 Specification for phenol-formaldehyde resin-bonded cork jointing
BS 2752:1990 Specification for chloroprene rubber compounds
BS 3492:1987 Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
BS 2752:1982 Specification for chloroprene rubber compounds
BS 903-2:1997 Physical testing of rubber Guide to the application of statistics to rubber testing
BS 3G 230:2000 Specification for general requirements for aircraft electrical cables (second series)
BS 7442-0:1991 Rubber or plastics covered rollers Introduction
BS 903-A18:1973 Physical testing of rubber Determination of equilibrium water vapour absorption
BS 3G 198-1:1989 Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification
BS 3395:1980 Specification for electrically bonded hose and hose assemblies for fuel dispensers
BS 6997:1990 Specification for elastomeric toroidal sealing rings (\'O\'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
BS G 198-5:1997 Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat shrinkable moulded shapes
BS 3682-1:1994 Specification for railway brake hose Specification for compressed air brake hose
BS 3454:1984 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines
BS 5409-2:1978 Specification for nylon tubing Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry
BS AU 110a:1995 Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
BS 3454:1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
BS 2767:1991 Specification for manually operated copper alloy valves for radiators
BS 4089:1989 Specification for hoses and hose assemblies for liquefied petroleum gas
BS 7541:1992 Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage
BS 903-1:1995 Physical testing of rubber Guide to the selection and use of methods of test for rubber
BS EN 297:1994 Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
BS 2751:1990 Specification for general purpose acrylonitrile-butadiene rubber compounds
BS 3905:1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.
BS 6996:1989 Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds
BS 5963:1981 Specification for electrically operated automatic gas shut-off valves
BS 5122:1986 Specification for rubber hoses for low-pressure and medium-pressure saturated steam
BS EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD
BS 5176:1975 Specification for classification system for vulcanized rubbers
BS 4G 198-1:1997 Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification
BS 6067:1981 Specification for multifunctional gas controls for domestic, commercial and catering appliances
BS 5173-5:1977 Methods of test for hoses Chemical resistance tests
BS 903-A34:1978 Methods of testing vulcanized rubber. Determination of stress relaxation of rubber rings in compression
BS 6505:1984 Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases
BS 6469:1984 Methods of test for insulation and sheaths of electric cables
BS 1870-1:1988 Safety footwear Specification for safety footwear other than all-rubber and all-plastics moulded types
BS 5412-5:1976 Specification for the performance of draw-off taps with metal bodies for water services Physio-chemical characteristics: materials, coatings
BS 1399-2:1970 Specification for rotary shaft lip seals Methods of performance rating
BS 6469:1990 Methods of test for insulation and sheaths of electric cables

ISO 2977:1997 Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
ISO 5661:1983 Petroleum products Hydrocarbon liquids Determination of refractive index
ISO 1826:1981 Rubber, vulcanized Time-interval between vulcanization and testing Specification
ISO 4661:1977 Rubber Preparation of test pieces
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 5282:1982 Aromatic hydrocarbons — Determination of sulphur content — Pitt-Ruprecht reduction and spectrophotometric method
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 471:1995 Rubber Temperatures, humidities and times for conditioning and testing
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.