BS AU 50-3.1e:2004

Superseded

View Superseded by

Tyres and wheels. Valves Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves

Available format(s)

Hardcopy , PDF

Superseded date

11-23-2012

Language(s)

English

Published date

11-26-2004

Publisher

British Standards Institution

1 Scope
2 Tubeless valves only
  2.1 Snap-in valves
      2.1.1 Valve hole 11,3 [+0,4/0]
      2.1.2 Valve hole 15,7 [+0,4/0]
  2.2 Clamp-in valves
      2.2.1 Clamp-in valves with O-ring
      2.2.2 Clamp-in valves with grommet
3 Valves for tube only
  3.1 Rubber covered valves
      3.1.1 Valve hole 8,3 [+0,3/0]
      3.1.2 Valve hole 11,3 [+0,4/0]
      3.1.3 Valve hole 15,7 [+0,4/0]
  3.2 Rubber base valves
      3.2.1 Valve hole 6,2
      3.2.2 Rim slot 12,5 [+2/0] and 14 [+3/0]
      3.2.3 Valve hole 12,5 [+0,4/0]
      3.2.4 Valve hole 15,7 [+0,4/0]
  3.3 Rubber semi-covered base valve - Valve hole
      10,2 [+0,3/0] or 11,3 [+0,4/0]
  3.4 Screw-on universal valve 12,5 [+2/0] and 14 [+3/0]
  3.5 Large bore valves - Rim slot 19 [+3/0] - (Valve
      body used for tubeless, valve hole 20,5 [+0,5/0])
  3.6 Metalbase valve
      3.6.1 Valve hole 6,2
      3.6.2 Valve hole 8,3
4 Spuds, valve bodies and adaptors
  4.1 Rubber spuds
      4.1.1 Spuds for screw-on universal valves - Rim
            slot 12,5 [+2/0] and 15 [+2/0]
      4.1.2 Rubber covered air/liquid spuds - Valve hole
            15,7 [+0,4/0]
      4.1.3 Screw-on large bore spuds - Valve hole 20,5
            [+0,5/0] and rim slot 19 [+3/0] mm
  4.2 Clamp-in spuds
      4.2.1 Air/liquid large bore spud - Valve hole 15,7
            [+0,4/0]
      4.2.2 Valve hole 20,5 [+0,5/0]
  4.3 Valve body and core housing
      4.3.1 Tubeless and tube type core housing for spuds
            with valve hole 15,7 [+0,4/0]
      4.3.2 Large and super large bore valve body for
            spuds with valve hole 20,5 [+0,5/0]
  4.4 Adaptors
      4.4.1 Straight adaptor
      4.4.2 Bent adaptor
5 Valve components
  5.1 O-Rings
  5.2 Ring washers
  5.3 Hex nuts
  5.4 Knurled nuts, hex nuts, screw
  5.5 Rubber grommets
  5.6 Valve caps
  5.7 Valve core
      5.7.1 For ISO core chamber No. 1
      5.7.2 For ISO core chamber No. 2
Annex A (normative) Valves and valve components for tyres -
                      Identification system
Annex B (normative) Correspondence between ISO designations
                      and other designations
Annex C (informative) Valves using ISO core chamber No. 3
Annex D (normative) Valve pressure ratings by use
Annex E (normative) Torque for clamp-in-valves - ISO designations
Bibliography

Defines the essential dimensions and the designation of tube valves and tubeless valves.

Committee	AUE/4
DevelopmentNote	Renumbers and supersedes BS AU 50-3.1D(2002). 2004 Version incorporates amendment 15365 to BS AU 50-3.1D(2002). Supersedes 02/707811 DC, 98/713113 DC and BS AU 50-3.1C(2001). Also numbered as ISO 9413. (11/2004)
DocumentType	Standard
Pages	110
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS ISO 9413 : 2012 BS ISO 9413:2012+A1:2012
Supersedes	02/707811 DC : DRAFT JULY 2002 98/713113 DC : AUG 98 BS AU 50-3.1c:2001 BS AU 50-3.1d:2002

ISO 3877-2:1997	Tyres, valves and tubes List of equivalent terms Part 2: Tyre valves
ISO 10475:1992	Valves for tubeless tyres and valves for tubes Identification system for valves and their components
ISO 6762:1982	Tyre valves ISO core chamber No. 2
ISO 4570-3:1980	Tyre valve threads Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
ISO 4570-2:1979	Tyre valve threads Part 2: Threads 9V1, 10V2, 12V1, 13V1
ISO 7442:1982	Tyre valves — ISO core chamber No. 1
ISO 4570-1:1977	Tyre valve threads Part 1: Threads 5V1, 5V2, 6V1 and 8V1