• There are no items in your cart

BS EN 10025:1993

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Hot rolled products of non-alloy structural steels. Technical delivery conditions
Available format(s)

Hardcopy , PDF

Withdrawn date

10-27-2018

Language(s)

English

Published date

11-15-1993

Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
2.1 General standards
2.2 Standards on dimensions and tolerances
2.3 Standards on testing
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification of grades and qualities;
      designation
6.1 Classification of grades and qualities
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery conditions
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
8 Inspection and testing
8.1 General
8.2 Specific inspection and testing
8.3 Sampling
8.4 Test units
8.5 Verification of chemical composition
8.6 Mechanical tests
8.7 Test methods
8.8 Retests and resubmission for testing
8.9 Internal defects
8.10 Inspection documents
9 Marking of flat and long products
10 Complaints after delivery
11 Options
11.1 All products
11.2 Flat products
11.3 Long products
11.4 Semi-finished products
Annex A (normative) Location of samples and test pieces
         (see EURONORM 18)
Annex B (informative) List of national standards which
         correspond with EURONORMS referenced
Annex C (informative) List of corresponding former
         national designations
National annex NA (normative) Non-conflicting national
                  additions
National annex NB (informative) Applicable standards
National annex NC (informative) Committees responsible
National annex ND (informative) Cross-references

Requirements for long and flat products.

Committee
ISE/103
DevelopmentNote
DRAFT FOR COMMENT 92/39163 DC
DocumentType
Standard
Pages
42
PublisherName
British Standards Institution
Status
Withdrawn
SupersededBy
Supersedes

Standards Relationship
I.S. EN 10025:1994 Identical
NS EN 10025 : 2ED 1990 Identical
UNE-EN 10025:1994 Identical
SN EN 10025 : 1994 Identical
NEN EN 10025 : 1993 Identical
NBN EN 10025 : 1993 Identical
NF EN 10025 : 1993 Identical
EN 10025:1990/A1:1993 Identical
UNI EN 10025 : 1995 Identical
DIN EN 10025:1994-03 Identical

BS EN 50341-2-9 : 2017 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012)
05/30136143 DC : DRAFT JUL 2005 BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY
BS 7861-1:1996 Strata reinforcement support system components used in coal mines Specification for rockbolting
BS 6084-1:1997 Methods for the evaluation of prefabrication primers Rating and weldability tests
BS 6779-3:1994 Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction
DEFSTAN 02-117/2(2002) : 2002 REQUIREMENTS FOR ANCHORING, BERTHING, TOWING AND SECURING TO A BUOY CATEGORY 2
06/30139507 DC : DRAFT MAY 2006 BS 1722-9 - FENCES - PART 9: SPECIFICATION FOR MILD STEEL (LOW CARBON STEEL) FENCES WITH ROUND OR SQUARE VERTICALS AND FLAT HORIZONTALS
06/30094362 DC : DRAFT JAN 2006 BS 4592-2 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 2: EXPANDED METAL GRATINGS - SPECIFICATION
06/30094360 DC : DRAFT JAN 2006 BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION
DEFSTAN 02-738/1(2000) : 2000 METALS AND CORROSION GUIDE
PD 5500:2000 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS 1722-2:2000 Fences Specification for strained wire and wire mesh netting fences
BS 7430:1998 Code of practice for earthing
BS 8004:2015 Code of practice for foundations
BS 8002:2015 Code of practice for earth retaining structures
BS 1722-12:1999 Fences Specification for steel palisade fences
BS 4211:1994 Specification for ladders for permanent access to chimneys, other high structures, silos and bins
BS 1722-14:2001 Fences Specification for open mesh steel panel fences
BS 5400-3:2000 Steel, concrete and composite bridges Code of practice for design of steel bridges
BS 1722-8:1997 Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles
ENA TS 43-97 : ISSUE 1 AMD 1 1996 STEEL SUPPORTS FOR SINGLE CIRCUIT 132kV OVERHEAD LINES
EEMUA 197 : 1999 SPECIFICATION FOR FABRICATION OF NON-PRIMARY STRUCTURAL STEELWORK FOR OFFSHORE INSTALLATIONS
DEFSTAN 95-24/2(2002) : 2002 ARMOUR PLATE, STEEL (3-160 MM)
15/30301520 DC : 0 BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004)
06/30094368 DC : DRAFT JAN 2006 BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION
DEFSTAN 81-86/2(2000) : 2000 CORR 2000 METAL FITTINGS FOR WOODEN CONTAINERS
BS 7670-2:1997 Steel nuts and bolts for resistance projection welding Specification for welding of weld nuts and weld bolts
DEFSTAN 95-24/1(2000) : 2000 ARMOUR PLATE, STEEL (3-160 MM)
DEFSTAN 07-288/2(2017) : 2017 SPECIFICATION FOR THE TYPE 'PD' AND SUPER 'D' MOUNTS
BS 5950-6(1995) : 1995 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 6: CODE OF PRACTICE FOR DESIGN OF LIGHT GAUGE PROFILED STEEL SHEETING
02/703583 DC : DRAFT FEB 2002 BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS
CEI EN 50341-2-9 : 2016 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND
EN 50341-2-9:2017 Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)
BS EN 286-2:1992 Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
BS 6651:1999 Code of practice for protection of structures against lightning
BS 4592-5:2006 Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification
BS 5628-3:2001 Code of practice for use of masonry Materials and components, design and workmanship
BS 5950-5:1998 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 5: CODE OF PRACTICE FOR DESIGN OF COLD FORMED THIN GAUGE SECTIONS
BS 5276-2:2003 Pressure vessel details (dimensions) Specification for saddle supports for horizontal cylindrical pressure vessels
BS 6180:1999 Barriers in and about buildings. Code of practice
BS 5950-2:1992 Structural use of steelwork in building Specification for materials, fabrication and erection: hot-rolled sections
BS 6510:2005 Steel-framed windows and glazed doors
PD 5500:2003 Specification for unfired fusion welded pressure vessels
BS PAS 68(2007) : 2007 SPECIFICATION FOR VEHICLE SECURITY BARRIERS
BS 2654:1989 Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry
BS 4592-1:1995 Industrial type flooring, walkways and stair treads Specification for open bar gratings
BS 5169:1992 Specification for fusion welded steel air receivers
BS 4592-1:2006 Industrial type flooring and stair treads Metal open bar gratings. Specification
BS 1722-9:2000 Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS 5950-2:2001 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS
BS 4092-1:1996 Specification for domestic front entrance gates Specification for metal gates
BS 5950-1:2000 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 1: CODE OF PRACTICE FOR DESIGN - ROLLED AND WELDED SECTIONS
BS 4074:2000 Specification for steel trench struts
BS 6180:1995 Code of practice for barriers in and about buildings
BS 6779-1:1998 Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction
BS 227:1995 Specification for H-section steel arches for use in mines
ENA TS 43-96 : ISSUE 2 COR 1 1996 FASTENERS AND WASHERS FOR WOOD POLE OVERHEAD LINES
ENA TS 43-11 : ISSUE 1 AMD 1 1996 400 KV STEEL TOWER TRANSMISSION LINES - SPECIFICATION L.12 (2 X 700 MM[2] AAAC PER PHASE) (1 X 425 MM[2] AAAC EARTH WIRE)
BS 8002:1994 Code of practice for earth retaining structures
06/30139509 DC : DRAFT MAY 2006 BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH
BS 9124:2008 Specification for steel and aluminium access cover systems with over 1 m clear opening
06/30094364 DC : DRAFT JAN 2006 BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION
BS 4592-5:1995 Industrial type flooring, walkways and stair treads Specification for solid plates in steel, aluminium and glass reinforced plastics
DEFSTAN 02-327/2(2001) : INTERIM REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS
PD 7974-3:2003 Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin (Sub-system 3)
BS 5950-7:1992 STRUCTURAL USE OF STEELWORK IN BUILDING - SPECIFICATION FOR MATERIALS AND WORKMANSHIP: COLD FORMED SECTIONS
BS 7818:1995 Specification for pedestrian restraint systems in metal
ENA TS 43-3 : ISSUE 1 AMD 1 1996 DESIGN OF LATTICE STEEL TRANSMISSION TOWERS FOR OVERHEAD LINES AT 132 KV AND HIGHER VOLTAGES
DD ENV 1090-1:1998 Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document)
15/30301518 DC : 0 BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES
04/30100932 DC : DRAFT AUG 2004 BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS
BS 7777-2:1993 Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C
BS EN 286-3:1995 Simple unfired pressure vessels designed to contain air or nitrogen Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
I.S. EN 50341-2-9:2017 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012)
07/30151811 DC : 0 BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING
BS PAS 68(2005) : 2005 SPECIFICATION FOR VEHICLE SECURITY BARRIERS - FIXED BOLLARDS
05/30131954 DC : DRAFT APR 2005 BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP
BS 8006:1995 Code of practice for strengthened/reinforced soils and other fills
BS EN 286-4:1995 Simple unfired pressure vessels designed to contain air or nitrogen Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS 1722-10:1999 Fences Specification for anti-intruder fences in chain link and welded mesh
BS 5975:1996 Code of practice for falsework
BS 5400-6:1999 STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL

EURONORM 54 : 1980 HOT-ROLLED SMALL U-BEAMS
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EURONORM 57 : 1978 HOT-ROLLED ROUND-EDGE UNEQUAL ANGLE STEEL
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EURONORM 18 : 1979 TAKING AND PREPARATION OF SAMPLES AND SAMPLE SECTIONS OF STEEL AND STEEL PRODUCTS
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EURONORM 24 : 1962 NORMAL I-BEAMS, U-BEAMS; PERMISSIBLE DEVIATIONS
EURONORM 53 : 1962 HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS
EURONORM 103 : 1971 MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS
EURONORM 60 : 1977 HOT-ROLLED ROUND STEEL FOR GENERAL USE
EURONORM 56 : 1977 HOT-ROLLED ROUND-EDGE EQUAL ANGLE STEEL
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EURONORM 19 : 1957 IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS
EURONORM 65 : 1980 HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS
EN 10021:2006 General technical delivery conditions for steel products
EURONORM 61 : 1982 HOT-ROLLED HEXAGON STEEL
EURONORM 58 : 1978 HOT-ROLLED FLAT STEEL FOR GENERAL USE
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004 Metallic products - Types of inspection documents
EURONORM 162 : 1981 COLD ROLLED SECTIONS; TECHNICAL TERMS OF DELIVERY
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10020:2000 Definition and classification of grades of steel
EURONORM 168 : 1986 IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS
EURONORM 59 : 1978 HOT-ROLLED SQUARE STEEL FOR GENERAL USE
EURONORM 91 : 1981 HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT
EURONORM 66 : 1967 HOT-ROLLED HALF-ROUND BARS AND FLAT HALF ROUNDS
EURONORM 17 : 1970 WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS

View more information
US$277.90
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.