Name: BS EN 10095 : 1999-07
Brand: BSI

HEAT RESISTING STEELS AND NICKEL ALLOYS

Published date

07-01-1999

Publisher

British Standards Institution

Foreword
1 Scope
2 Normative references
3 Definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
6.1 General
6.2 Delivery condition
7 Requirements
7.1 General
7.2 Chemical composition
7.3 Mechanical properties
7.4 Surface quality
7.5 Dimensions and tolerances on dimensions
7.6 Calculation of mass and tolerances on mass
8 Inspection and testing
8.1 General
8.2 Types and contents of inspection documents
8.3 Specific inspection and testing
8.4 Test methods
8.5 Retest
9 Marking
Annex A (informative) Applicable dimensional standards
Annex B (informative) Technical information on heat
                      resisting steels and nickel alloys
Annex C (informative) Bibliography
Annex D (informative) Grades from EN 10088-1 and
                      prEN 10028-7 used as heat resisting
                      steels

Defines grades of wrought steels and nickel alloys normally used for products where the main requirement is resistance to the effects of hot gases and products of combustion at temperatures higher than 500 deg.C.

Committee	ISE/30
DevelopmentNote	Partially Supersedes BS 970-1(1996). Supersedes 96/703012 DC. (08/1999) Reviewed and confirmed by BSI, April, 2004. (11/2004) Together with BS EN 10051, BS EN 10029, BS EN 10048 and BS EN 10088-2, supersedes BS 1449-2(1983). (02/2008)
DocumentType	Standard
ProductNote	Partially Supersedes BS 970-1(1996). Supersedes 96/703012 DC. (EJB 08/1999) Reviewed and confirmed by BSI, April, 2004. (SND 11/2004) Together with BS EN 10051, BS EN 10029, BS EN 10048 and BS EN 10088-2, supersedes BS 1449-2(1983). (Allwyn 02/2008)
PublisherName	British Standards Institution
Status	Current

Standards	Relationship
NF EN 10095 : 1999	Identical
NEN EN 10095 : 1999	Identical
NBN EN 10095 : 1999 COR 2001	Identical
NS EN 10095 : 1ED 1999	Identical
DIN EN 10095:1999-05	Identical
I.S. EN 10095:1999	Identical
UNE-EN 10095:2000	Identical
SN EN 10095 : 1999 CORR 2001	Identical
EN 10095:1999	Identical
UNI EN 10095 : 2001	Identical

EN 10002-1 : 2001	METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993	Vocabulary of heat treatment terms for ferrous products
EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007	Definition of steel products
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
PREN 10222-5 : DRAFT 2012	STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS
EN 10221:1995	Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10029:2010	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10002-5:1991	Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
PREN 10272 : DRAFT 2013	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
EN ISO 377:2017	Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN 10088-3:2014	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN ISO 9002:1994/AC:1997	QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
PREN 10028-7 : DRAFT 2013	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
EURONORM 60 : 1977	HOT-ROLLED ROUND STEEL FOR GENERAL USE
EN 10163-2:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EURONORM 65 : 1980	HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006	General technical delivery conditions for steel products
EURONORM 61 : 1982	HOT-ROLLED HEXAGON STEEL
EURONORM 58 : 1978	HOT-ROLLED FLAT STEEL FOR GENERAL USE
EN 10204:2004	Metallic products - Types of inspection documents
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
EURONORM 168 : 1986	IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS
EN 10003-1 : 1994	METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD
PREN 10263-5 : DRAFT 2014	STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS
EURONORM 59 : 1978	HOT-ROLLED SQUARE STEEL FOR GENERAL USE
EN 10258 : 1997	COLD-ROLLED STAINLESS STEEL AND NARROW STRIP AND CUT LENGTHS - TOLERANCES AND DIMENSIONS AND SHAPE
EN 10213-4 : 1995	TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES
EN 10259 : 1997	COLD-ROLLED STAINLESS STEEL WIDE STRIP AND PLATE/SHEET - TOLERANCES ON DIMENSIONS AND SHAPE
ISO 14284:1996	Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EURONORM 17 : 1970	WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels