• There are no items in your cart

BS EN 1011-1:2009

Current
Current

The latest, up-to-date edition.

Welding. Recommendations for welding of metallic materials General guidance for arc welding
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-31-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
   4.1 General
   4.2 Fundamental information for fabrication
   4.3 Non-conformance and corrective actions
5 Requirements on welding production
   5.1 Equipment and devices
   5.2 Workplace
   5.3 Personnel
   5.4 Welding processes
   5.5 Sub-contracting
6 Parent metals and welding consumables
   6.1 Storage and handling
   6.2 Material certificates
7 Planning
   7.1 Information on drawings
   7.2 Assembly for welding
   7.3 Run-on and run-off plates
   7.4 Temporary attachments
   7.5 Fabrication and inspection feasibility
   7.6 Welding procedure specification
   7.7 Weld sequence
8 Welding fabrication
   8.1 Welding instructions
   8.2 Joint preparation and surface cleaning
   8.3 Preheating
   8.4 Arc strikes
   8.5 Tack welds
   8.6 Weld run sequence
   8.7 Heat input
   8.8 Protection against oxidation
   8.9 Weld imperfections
   8.10 Traceability
9 Elimination of distortion or inherent stresses
10 Post-weld heat treatment
11 Surface cleaning and treatment
12 Inspection and documentation
Bibliography

Provides guidance for the arc welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged).

This European Standard contains general guidance for the arc welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged).

The processes and techniques referred to in this Part of EN 1011 may not all be relevant to all materials. Additional information relevant to specific materials is given in the relevant Parts of the Standard.

Committee
WEE/0
DevelopmentNote
Together with BS EN 1011-2, supersedes BS 5135(1984) (04/2001) Supersedes 93/702956 DC (11/2002) Supersedes 07/30158903 DC. (03/2009)
DocumentType
Standard
Pages
18
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
NEN EN 1011-1 : 2009 Identical
NS EN 1011-1 : 2009 Identical
UNE-EN 1011-1:2010 Identical
DIN EN 1011-1:2009-07 Identical
SN EN 1011-1 : 2009 Identical
I.S. EN 1011-1:2009 Identical
NF EN 1011-1 : 2009 Identical
NBN EN 1011-1 : 2009 Identical
UNI EN 1011-1 : 2009 Identical
EN 1011-1:2009 Identical

BS 6349-1-4:2013 Maritime works General. Code of practice for materials
06/30139515 DC : DRAFT MAY 2006 BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES
16/30338305 DC : 0 BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS - SPECIFICATION
12/30250711 DC : 0 BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS
DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK
BS 8548:2017 Guidance for arc welding of reinforcing steel
17/30349707 DC : DRAFT AUG 2017 BS 5975:2018 - CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK
BS 1722-1:2006 Fences Specification for chain link fences
BS 1722-14:2017 Fences Specification for open mesh steel panel
BS 5975(2008) : 2008 CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK
BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
BS 8297:2017 Design, manufacture and installation of architectural precast concrete cladding. Code of practice
BS 7668:2016 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
BS 1722-14:2006 Fences Specification for open mesh steel panel fences
BS 1722-12:2016 Fences Steel palisade fences. Manufacturing and installation. Specification
BS 1722-12:2006 Fences Specification for steel palisade fences
DEFSTAN 81-086/5(2022):2022 Metal Fittings for Wooden Containers
BS 1722-8:2006 Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles
W59-13 Welded steel construction (metal arc welding)
07/30160560 DC : DRAFT JAN 2007 PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
06/30094368 DC : DRAFT JAN 2006 BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION
DEFSTAN 81-86/3(2007) : 2007 METAL FITTINGS FOR WOODEN CONTAINERS
DEFSTAN 02-706/2(2010) : 2010 WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
08/30162761 DC : DRAFT AUG 2008 BS 499-1 - WELDING TERMS AND SYMBOLS - PART 1: GLOSSARY FOR WELDING, BRAZING AND THERMAL CUTTING
05/30113263 DC : DRAFT FEB 2005 BS 7775 - SPECIFICATION FOR PENSTOCKS
DEFSTAN 07-85(PT1)/3(2006) : 2006 DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS
02/703583 DC : DRAFT FEB 2002 BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS
BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS 7775:2005 Penstocks for use in water and other liquid flow applications. Specification
BS 4515-1:2004 Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines
BS 7608(2014) : 2014 GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS
BS 4592-5:2006 Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification
BS 4515-1:2009 Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines
BS 799-5:2010 Oil burning equipment Carbon steel oil storage tanks. Specification
BS 6180:2011 Barriers in and about buildings. Code of practice
BS 5950-2:2001 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS
BS 8110-1:1997 STRUCTURAL USE OF CONCRETE - PART 1: CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION
17/30341308 DC : DRAFT JUNE 2017 BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL
17/30342957 DC : 0 BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE
DEFSTAN 81-086/4(2017) : 2017 FITTINGS METAL AND HANDLES FOR CONTAINERS
06/30139509 DC : DRAFT MAY 2006 BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH
BS 499-1:2009 Welding terms and symbols Glossary for welding, brazing and thermal cutting
13/30102062 DC : 0 BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS
16/30337162 DC : 0 BS 8548 - GUIDANCE FOR ARC WELDING OF REINFORCING STEEL
DEFSTAN 02-857/2(2010) : 2010 REQUIREMENTS FOR THE WELDING OF CAST IRON
07/30150912 DC : 0 BS 5975 - CODE OF PRACTICE FOR THE PROCEDURAL CONTROL OF TEMPORARY WORKS AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK
BS 853-1:1990+A3:2011 Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply
16/30325063 DC : 0 BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION
BS 5400-3:2000 Steel, concrete and composite bridges Code of practice for design of steel bridges
BS 1722-10:2006 Fences Specification for anti-intruder fences in chain link and welded mesh
BS 1722-2:2006 Fences Specification for strained wire and wire mesh netting fences

ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements
EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements
EN 1011-4:2000/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
ISO 9606-5:2000 Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
ISO 17662:2016 Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
EN 1011-7:2004 Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
ISO 14731:2006 Welding coordination Tasks and responsibilities
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
IEC TS 62081:1999 Arc welding equipment - Installation and use
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015)
EN ISO 14731:2006 Welding coordination - Tasks and responsibilities (ISO 14731:2006)
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 1011-5:2003 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)
ISO 14175:2008 Welding consumables — Gases and gas mixtures for fusion welding and allied processes
EN ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
CEN/TR 14599:2005 Terms and definitions for welding purposes in relation with EN 1792
EN ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004)
EN 1792:2003 Welding - Multilingual list of terms for welding and related processes
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
ISO 13916:2017 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN ISO 9606-3 : 1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
ISO 9606-3:1999 Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)

View more information
US$160.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.