• There are no items in your cart

BS EN 10113-1:1993

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Hot-rolled products in weldable fine grain structural steels General delivery conditions
Available format(s)

Hardcopy , PDF

Superseded date

11-17-2004

Language(s)

English

Published date

09-15-1993

Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification of qualities; designation
6.1 Classification of qualities
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery condition
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
7.7 Internal defects
8 Inspection and testing
8.1 General
8.2 Sampling
8.3 Test units
8.4 Verification of chemical composition
8.5 Mechanical tests
8.6 Test methods
8.7 Retests and resubmission for testing
8.8 Inspection documents
9 Marking for flat and long products
10 Complaints after delivery
11 Options
11.1 All products
11.2 Flat products
11.3 Long products
Annex A (normative) Location of samples and test pieces
         (see EURONORM 18)
Annex B (informative) List of national standards which
         correspond to EURONORMS referenced
Annex C (informative) List of corresponding former
         designations
National annex NA (informative) Committees responsible
National annex NB (informative) Cross-references

Committee
ISE/103
DevelopmentNote
Together with BS 7613(1994), BS 7668(1994), BS EN 10029, BS EN 10113-2, BS EN 10113-3, BS EN 10155 and BS EN 10210-1 supersedes BS 4360(1990). Supersedes 90/42740 DC. (07/2005)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

EN 10113-2 : 1993 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
EN 10113-3 : 1993 HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS
BS 2654:1989 Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry
BS 4074:2000 Specification for steel trench struts
07/30016130 DC : 0 BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT
BS EN 10113-2:1993 Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels
BS 7818:1995 Specification for pedestrian restraint systems in metal
BS EN 10113-3:1993 Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels
BS 5975:1996 Code of practice for falsework
BS 5400-6:1999 STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL

EURONORM 54 : 1980 HOT-ROLLED SMALL U-BEAMS
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EURONORM 57 : 1978 HOT-ROLLED ROUND-EDGE UNEQUAL ANGLE STEEL
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EURONORM 160 : 1985 ULTRASONIC TESTING OF SHEET STEELS WITH THICKNESSES OF MORE THAN OR EQUAL TO 6mm (REFLECTION TEST)
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EURONORM 18 : 1979 TAKING AND PREPARATION OF SAMPLES AND SAMPLE SECTIONS OF STEEL AND STEEL PRODUCTS
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EURONORM 24 : 1962 NORMAL I-BEAMS, U-BEAMS; PERMISSIBLE DEVIATIONS
EURONORM 48 : 1984 HOT-ROLLED STRIP STEEL; PERMISSIBLE DEVIATIONS IN DIMENSIONS AND FORM
EURONORM 53 : 1962 HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS
EURONORM 103 : 1971 MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS
EURONORM 60 : 1977 HOT-ROLLED ROUND STEEL FOR GENERAL USE
EURONORM 56 : 1977 HOT-ROLLED ROUND-EDGE EQUAL ANGLE STEEL
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EURONORM 19 : 1957 IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
EURONORM 65 : 1980 HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS
EURONORM 67 : 1978 HOT-ROLLED BULB FLATS
EN 10021:2006 General technical delivery conditions for steel products
EURONORM 61 : 1982 HOT-ROLLED HEXAGON STEEL
EURONORM 58 : 1978 HOT-ROLLED FLAT STEEL FOR GENERAL USE
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EURONORM 186 : 1987 ULTRASONIC TESTING OF BROAD FLANGED BEAMS WITH PARALLEL FLANGES AND IPE BEAMS
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
EN 10204:2004 Metallic products - Types of inspection documents
EURONORM 162 : 1981 COLD ROLLED SECTIONS; TECHNICAL TERMS OF DELIVERY
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10020:2000 Definition and classification of grades of steel
EURONORM 168 : 1986 IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS
EURONORM 59 : 1978 HOT-ROLLED SQUARE STEEL FOR GENERAL USE
EURONORM 91 : 1981 HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT
EURONORM 66 : 1967 HOT-ROLLED HALF-ROUND BARS AND FLAT HALF ROUNDS

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.