BS EN 10219-1:2006
Current
Current
The latest, up-to-date edition.
Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
04-30-2018
Publisher
This revision permits the publication of BS EN 10219-1 be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN Consultant. The revision has introduced changes to the normative reference and aligns the production processes and the technical requirements between two parallel products (BS EN 10219-1 and BS EN 10210-1).
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment. Requirements for tolerances, dimensions and sectional properties are contained in EN10219‑2 . NOTE A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN10025‑2 and EN10025‑3 .
| Committee |
ISE/103
|
| DevelopmentNote |
Supersedes 92/45388 DC. (07/2005) Supersedes 03/103470 DC (05/2006)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 10219-1 : 2ED 2006 | Identical |
| UNE-EN 10219-1:2007 | Identical |
| I.S. EN 10219-1:2006 | Identical |
| NEN EN 10219-1 : 2006 | Identical |
| NBN EN 10219-1 : 2006 | Identical |
| UNI EN 10219-1 : 2006 | Identical |
| SN EN 10219-1 : 2006 | Identical |
| DIN EN 10219-1:2016-01 (Draft) | Identical |
| NF EN 10219-1 : 2006 | Identical |
| EN 10219-1:2006 | Identical |
| DIN EN 10219-1:2006-07 | Identical |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS 1722-12:1999 | Fences Specification for steel palisade fences |
| BS 1722-12:2006 | Fences Specification for steel palisade fences |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| 02/703583 DC : DRAFT FEB 2002 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS |
| BS 5950-5:1998 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 5: CODE OF PRACTICE FOR DESIGN OF COLD FORMED THIN GAUGE SECTIONS |
| BS 6180:1999 | Barriers in and about buildings. Code of practice |
| BS 1722-9:2006 | Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
| BS 5950-1:2000 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 1: CODE OF PRACTICE FOR DESIGN - ROLLED AND WELDED SECTIONS |
| BS 4074:2000 | Specification for steel trench struts |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| 09/30093195 DC : 0 | BS 6349-2 - MARITIME WORKS - PART 2: CODE OF PRACTICE FOR THE DESIGN OF QUAY WALLS, JETTIES AND DOLPHINS |
| 09/30168197 DC : 0 | BS 8102 - CODE OF PRACTICE FOR PROTECTION OF STRUCTURES FROM WATER FROM THE GROUND |
| 10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| 16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| BS 6349-2:2010 | Maritime works Code of practice for the design of quay walls, jetties and dolphins |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 1011-2:2001/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10246-10:2000 | Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
US$261.13
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.