|
EN ISO 14284:2002
|
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
|
|
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
|
|
EN 10052:1993
|
Vocabulary of heat treatment terms for ferrous products
|
|
EN ISO 8493 : 2004
|
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
|
|
EN 10079:2007
|
Definition of steel products
|
|
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
|
|
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
|
|
EN 10002-5:1991
|
Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
|
|
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
|
|
EN 10168:2004
|
Steel products - Inspection documents - List of information and description
|
|
EN ISO 2566-1:1999
|
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
|
|
ISO 8493:1998
|
Metallic materials Tube Drift-expanding test
|
|
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
|
|
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size)
|
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
|
|
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles
|
|
EN 910 : 1996
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
|
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
|
EN ISO 1127:1996
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
|
|
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
|
|
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
|
|
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
|
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
|
EN 13480-3:2017
|
Metallic industrial piping - Part 3: Design and calculation
|
|
EN 10272:2016
|
Stainless steel bars for pressure purposes
|
|
EN 10021:2006
|
General technical delivery conditions for steel products
|
|
ISO 5251:1981
|
Stainless steel butt-welding fittings
|
|
ISO 3651-2:1998
|
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
|
|
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels
|
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
|
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
|
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
|
ISO 3419:1981
|
Non-alloy and alloy steel butt-welding fittings
|
|
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes
|
|
EN 10020:2000
|
Definition and classification of grades of steel
|
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules
|
|
EN 10266:2003
|
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
|
|
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
|
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
|
ISO 14284:1996
|
Steel and iron — Sampling and preparation of samples for the determination of chemical composition
|
|
EN ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
|
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|
|
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
|
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.