• There are no items in your cart

BS EN 1028-1 : 2002

Current
Current

The latest, up-to-date edition.

FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2002

Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
   3.1 Pumps and their applications
   3.2 Suction heights
   3.3 Pressures
   3.4 Delivery rates
   3.5 Power
   3.6 Speed of rotation
   3.7 Efficiencies
4 List of significant hazards
5 Safety requirements and/or protective measures
   5.1 General
   5.2 Special requirements
        5.2.1 Mechanical hazards
        5.2.2 Electrical hazards
        5.2.3 Thermal hazards
        5.2.4 Hazards from neglecting ergonomic design principles
        5.2.5 Hazards due to breakdown and/or incorrect installation
               of protection devices
6 General and performance requirements
   6.1 Design
   6.2 Materials
   6.3 Nominal delivery pressure
   6.4 Nominal delivery rate
   6.5 Geodetic nominal suction height
   6.6 Closing pressure
   6.7 Primer
   6.8 Drainability
   6.9 Shut off valves and pump connections
   6.10 Pump inlet screen
   6.11 Low temperature starting
   6.12 Very low temperature behaviour
   6.13 Operating controls
   6.14 Additional equipment
   6.15 Pump integrity protection equipment
   6.16 Efficiency
   6.17 Guarantee points
   6.18 Special tools
7 Verification of the safety requirements and/or protective
   measures
8 Verification of the general and performance requirements
9 Classification and brief designation
10 Designation
11 Information for use
   11.1 General
   11.2 Signals and warning devices
   11.3 Accompanying documents
        11.3.1 General
        11.3.2 Contents
   11.4 Marking
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Describes the classification and general requirements for fire-fighting centrifugal pumps with priming devices with a nominal delivery rate of up to 6000 l/min.

Committee
FSH/17/4
DevelopmentNote
Supersedes 93/303211 DC (10/2002) 2002 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (10/2008)
DocumentType
Standard
Pages
34
PublisherName
British Standards Institution
Status
Current
Supersedes

EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 5199:2002 Technical specifications for centrifugal pumps — Class II
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
ISO 9908:1993 Technical specifications for centrifugal pumps — Class III
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN ISO 9908:1997/A1:2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 1846-1:2011 Firefighting and rescue service vehicles - Part 1: Nomenclature and designation
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 3864:1984 Safety colours and safety signs
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 25199 : 1992 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS SECOND
EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$261.13
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.