BS EN 12163:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Copper and copper alloys. Rod for general purposes
Available format(s)
Hardcopy , PDF
Superseded date
08-21-2016
Language(s)
English
Published date
06-30-2011
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Bibliography
Defines the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding intended for general purposes.
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding intended for general purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
| Committee |
NFE/34
|
| DevelopmentNote |
Together with BS EN 12164 and BS EN 12167 it supersedes BS 2874(1986). Supersedes 95/714530 DC. (08/2004)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 12163:2011 | Identical |
| DIN EN 12163:2015-12 (Draft) | Identical |
| I.S. EN 12163:2016 | Identical |
| SN EN 12163 : 2016 | Identical |
| EN 12163:2016 | Identical |
| NEN EN 12163 : 2016 | Identical |
| UNI EN 12163 : 2011 | Identical |
| NF EN 12163 : 2016 | Identical |
| NS EN 12163 : 2016 | Identical |
| UNE-EN 12163:2017 | Identical |
| NBN EN 12163 : 2011 | Identical |
| DIN EN 12163:1998-04 | Identical |
| DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 09/30181195 DC : 0 | BS 3B 25 - SPECIFICATION FOR COPPER-NICKEL-SILICON ALLOY RODS, SECTIONS, FORGING STOCK AND FORGINGS (HEAT TREATED) |
| 09/30181197 DC : 0 | BS 3B 26 - SPECIFICATION FOR COPPER-NICKEL-SILICON ALLOY RODS, SECTIONS AND PARTS (SOLUTION TREATED, COLD WORKED AND PRECIPITATION TREATED) |
| DEFSTAN 07-207/2(2009) : 2009 | REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE) |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| BS 3B 32:2009 | Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated) |
| DEFSTAN 02-835/2(2011) : 2011 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| DEFSTAN 02-838(PT2)/2(2012) : 2012 | REQUIREMENTS FOR PHOSPHOR BRONZE - PART 2: WROUGHT BAR STOCK |
| BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| 09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
| 09/30181191 DC : 0 | BS 2B 23 - SPECIFICATION FOR COPPER-ALUMINIUM-NICKEL-IRON ALLOY RODS, SECTIONS, FORGING STOCK AND FORGINGS |
| 11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
| BS 3B 25:2009 | Specification for copper-nickel-silicon alloy rods, bars, sections, forging stock and forgings (heat treated) |
| 13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| 09/30181209 DC : 0 | BS 3B 32 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY RODS AND SECTIONS (SOLUTION TREATED AND PRECIPITATION TREATED) |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
| BS 5884:1999 | Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials |
| BS 746(2005) : 2005 | SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| BS 6180:1999 | Barriers in and about buildings. Code of practice |
| BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 2B 25:2001 | Copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated) |
| BS 2B 23:2009 | Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings |
| DEFSTAN 02-780(PT2)/2(2009) : 2009 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 2: FORGINGS, FORGE STOCK RODS AND SECTIONS |
| 13/30274750 DC : 0 | BS 2A 204 ETC+A3 - SPECIFICATIONS FOR MACHINE SCREWS AND NUTS (UNIFIED THREADS) BELOW 1/4 INCH FOR AERONAUTICAL PURPOSES |
| 13/30260274 DC : 0 | BS 5642-1:1978/A1 - SILLS AND COPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| DEFSTAN 02-879(PT2)/1(2011) : 2011 | REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| 15/30281806 DC : 0 | BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS |
| BS 2456:1990 | Specification for floats (plastics) for float operated valves for cold water services |
| 12/30243876 DC : DRAFT JULY 2012 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| DEFSTAN 66-2(PT2)/1(2005) : 2005 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| 16/30353337 DC : 0 | PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| DEFSTAN 02-743(PT5)/2(2012) : 2012 | PIPE MANIPULATION - PART 5: BRAZING |
| 10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
| 09/30181193 DC : 0 | BS 2B 24 - SPECIFICATION FOR COPPER-TIN-PHOSPHOROUS ALLOY RODS AND SECTIONS |
| DEFSTAN 02-833(PT2)/3(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| BS 2B 24:2009 | Specification for copper-tin-phosphorous alloy rods and sections |
| 11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| 04/30043993 DC : DRAFT APR 2004 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| BS 2B 26:2001 | Copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated) |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 02-179/1(2002) : 2002 | REQUIREMENTS FOR LOCKERS (MAGAZINE, RU MAGAZINE AND DETONATOR) USED FOR STORAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys Code of designation Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
US$277.90
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.