BS EN 12167:2011
Current
The latest, up-to-date edition.
Copper and copper alloys. Profiles and bars for general purposes
Hardcopy , PDF
English
06-30-2011
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Bibliography
Defines the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
This European Standard applies to profiles with L-, T- and U-shaped cross-sections which would fit within a circumscribing circle of a maximum 180 mm diameter and to bars with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
Committee |
NFE/34
|
DevelopmentNote |
Together with BS EN 12163 and BS EN 12164, supersedes BS 2874(1986) Supersedes 95/714534 DC (08/2004)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Current
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 12167:2011 | Identical |
NF EN 12167 : 2016 | Identical |
DIN EN 12167:2015-12 (Draft) | Identical |
I.S. EN 12167:2016 | Identical |
SN EN 12167 : 2016 | Identical |
EN 12167:2016 | Identical |
NS EN 12167 : 2016 | Identical |
NEN EN 12167 : 2016 | Identical |
UNI EN 12167 : 2011 | Identical |
UNE-EN 12167:2017 | Identical |
NBN EN 12167 : 2011 | Identical |
DIN EN 12167:1998-04 | Identical |
DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
BS 746:2014 | Specification for gas meter unions and adaptors |
DEFSTAN 02-835/2(2011) : 2011 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
13/30260274 DC : 0 | BS 5642-1:1978/A1 - SILLS AND COPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
BS 746(2005) : 2005 | SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 6180:1999 | Barriers in and about buildings. Code of practice |
BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
BS 6180:2011 | Barriers in and about buildings. Code of practice |
BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
DEFSTAN 02-780(PT2)/2(2009) : 2009 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 2: FORGINGS, FORGE STOCK RODS AND SECTIONS |
DEFSTAN 02-879(PT2)/1(2011) : 2011 | REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 2456:1990 | Specification for floats (plastics) for float operated valves for cold water services |
12/30243876 DC : DRAFT JULY 2012 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
DEFSTAN 66-2(PT2)/1(2005) : 2005 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
16/30353337 DC : 0 | PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
DEFSTAN 02-743(PT5)/2(2012) : 2012 | PIPE MANIPULATION - PART 5: BRAZING |
DEFSTAN 02-833(PT2)/3(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
04/30043993 DC : DRAFT APR 2004 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
DEFSTAN 02-179/1(2002) : 2002 | REQUIREMENTS FOR LOCKERS (MAGAZINE, RU MAGAZINE AND DETONATOR) USED FOR STORAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 6509-1:2014 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 1: Test method |
EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
EN 1412:2016 | Copper and copper alloys - European numbering system |
ISO 1190-1:1982 | Copper and copper alloys Code of designation Part 1: Designation of materials |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 1811-2:1988 | Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 1173:2008 | Copper and copper alloys - Material condition designation |
EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 4739:1985 | Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.