BS EN 13053 : 2006
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Ratings and performance of the entire air handling unit
6 Ratings and performance of the entire air handling unit
7 Extended hygiene requirements for special applications
8 Instructions for installation, operation and maintenance
Annex A (informative) - Air handling units - Heat recovery
- Defrosting - Requirements and testing
Annex B (informative) - Air handling units - Heat recovery
- Characteristics
Bibliography
Describes requirements and testing for ratings and performance of air handling units as a whole. Also specifies requirements, recommendations, classification, and testing of specific components and sections of air handling units.
Committee |
RHE/2
|
DevelopmentNote |
Supersedes 97/719334 DC (09/2002) Supersedes 03/316891 DC. (10/2006) 2006 Edition Re-Issued in May 2012 & incorporates AMD 1 2011. Supersedes 10/30234300 DC. (05/2012)
|
DocumentType |
Standard
|
Pages |
58
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 13053:2007 | Identical |
I.S. EN 13053:2006 | Identical |
NBN EN 13053 : 2007 + A1 2011 | Identical |
EN 13053:2006+A1:2011 | Identical |
NS EN 13053 : 2006 + A1 2011 | Identical |
SN EN 13053 : 2006 + A1 2011 | Identical |
UNI EN 13053 : 2011 | Identical |
NF EN 13053 : 2006 + A1 2011 | Identical |
NEN EN 13053 : 2006 + A1 2011 | Identical |
ONORM EN 13053 : 2011 | Identical |
DIN EN 13053:2012-02 | Identical |
BS 8568:2013 | Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices |
EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 305:1997 | Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
ISO 5801:2017 | Fans — Performance testing using standardized airways |
EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
EN ISO 9614-2 : 1996 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
IEC 60034-2:1972 | Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) |
EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
EN 60034-2:1996/A2:1996 | ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) |
ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
EN 1216:1998/A1:2002 | HEAT EXCHANGERS - FORCED CIRCULATION AIR-COOLING AND AIR-HEATING COILS - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
ISO 5221:1984 | Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct |
EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.