• There are no items in your cart

BS EN 1401-1:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
Available format(s)

Hardcopy , PDF

Superseded date

07-23-2019

Language(s)

English

Published date

10-31-2009

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
   3.1 Terms and definitions
   3.2 Symbols
   3.3 Abbreviations
4 Material
   4.1 Raw material
   4.2 Pipe material
   4.3 Fitting material
   4.4 Utilisation of non-virgin materials
   4.5 Sealing ring retaining means
5 General characteristics
   5.1 Appearance
   5.2 Colour
6 Geometrical characteristics
   6.1 General
   6.2 Dimensions of pipes
   6.3 Dimensions of fittings
   6.4 Dimensions of sockets and spigots
   6.5 Types of fittings
7 Mechanical characteristics
   7.1 Mechanical characteristics of pipes
   7.2 Mechanical characteristics of fittings
8 Physical characteristics
   8.1 Physical characteristics of pipes
   8.2 Physical characteristics of fittings
9 Performance requirements
10 Sealing rings
11 Adhesives
12 Marking
   12.1 General
   12.2 Minimum required marking of pipes
   12.3 Minimum required marking of fittings
   12.4 Additional marking
Annex A (normative) - Utilisation of non-virgin material
        A.1 Material definitions
        A.2 Own reprocessable material
        A.3 External reprocessable and recyclable materials
            with agreed specification
        A.4 External reprocessable and recyclable materials
            not covered by an agreed specification
        A.5 Summary of use of non-virgin material
Annex B (informative) - General characteristics of PVC-U
                        pipes and fittings
        B.1 General
        B.2 Compound characteristics
        B.3 Ring stiffness
        B.4 Creep ratio
        B.5 Chemical resistance
        B.6 Abrasion resistance
        B.7 Hydraulic roughness
        B.8 Diametric deflection
Annex C (informative) - Product standards
Bibliography

Describes the requirements for solid wall pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems in the field of non-pressure underground drainage and sewerage: a) outside the building structure (application area code "U"); and b) both buried in ground within the building structure (application area code "D") and outside the building.

Committee
PRI/88/1
DevelopmentNote
Supersedes BS 4660(1989), 94/340645 DC, 94/340646 DC, 94/340647 DC and 94/340648 DC. (09/2005) Supersedes 06/30148365 DC. (07/2009)
DocumentType
Standard
Pages
42
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NF EN 1401-1 : 2009 Identical
NS EN 1401-1 : 2009 Identical
NEN EN 1401-1 : 2009 Identical
DIN EN 1401-1:2009-07 Identical
UNI EN 1401-1 : 2009 Identical
EN 1401-1:2009 Identical
UNE-EN 1401-1:2009 Identical
SN EN 1401-1 : 2009 Identical
I.S. EN 1401-1:2009 Identical
NBN EN 1401-1 : 2009 Identical
ONORM EN 1401-1 : 2009 Identical

08/30142158 DC : DRAFT NOV 2008 BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES
BS 6297(2007) : 2007 CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF DRAINAGE FIELDS FOR USE IN WASTEWATER TREATMENT
BS 8004:2015 Code of practice for foundations
07/30138205 DC : DRAFT MAR 2007 BS 6297 - DESIGN AND INSTALLATION OF SMALL SEWAGE TREATMENT WORKS AND CESSPOOLS - CODE OF PRACTICE
15/30301520 DC : 0 BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004)
BS 6349-1:2000 Maritime structures Code of practice for general criteria
BS 7158:2001 Plastics inspection chambers for drains and sewers. Specification
BS 4660:2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage

EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
EN 295-3:2012 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
ISO/TR 10358:1993 Plastics pipes and fittings Combined chemical-resistance classification table
ENV 1401-3:2001 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 265-1:1988 Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
ISO/TR 7620:2005 Rubber materials — Chemical resistance
EN ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value
ISO 3126:2005 Plastics piping systems Plastics components Determination of dimensions
EN 476:2011 General requirements for components used in drains and sewers
ISO 472:2013 Plastics Vocabulary
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
ISO 18373-1:2007 Rigid PVC pipes Differential scanning calorimetry (DSC) method Part 1: Measurement of the processing temperature
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 12666-1:2005+A1:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
EN ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
EN 580:2003 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
ISO 9967:2016 Thermoplastics pipes Determination of creep ratio
EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
EN 1053:1995 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
ISO 13967:2009 Thermoplastics fittings Determination of ring stiffness
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters

View more information
US$261.13
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.