BS EN 14143:2013
Current
The latest, up-to-date edition.
Respiratory equipment. Self-contained re-breathing diving apparatus
Hardcopy , PDF
English
08-31-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Minimum equipment
5 Requirements
6 Testing
7 Marking
8 Information supplied by manufacturer
Annex A (informative) - Requirement clauses and
corresponding test clauses of this
European Standard
Annex B (normative) - Safety-critical software
Annex C (informative) - Artificial sea water
Annex D (informative) - Details of significant technical
changes between this European Standard and
the previous edition
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 89/686/EEC on Personal
Protective Equipment
Bibliography
Describes minimum requirements for self-contained re-breathing diving apparatus to ensure a minimum level of safe operation of the apparatus.
This European Standard specifies minimum requirements for self-contained re-breathing diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following:
a maximum depth of 6 m for apparatus using pure oxygen;
a maximum depth of 40 m for apparatus using oxygen in nitrogen gas mixtures;
a maximum depth of 100 m for apparatus using oxygen and helium or oxygen, nitrogen and helium gas mixtures;
water temperatures from 4 °C to 34 °C or outside these temperatures as specified by the manufacturer.
Committee |
PH/4/7
|
DevelopmentNote |
Supersedes 01/562260 DC. (10/2003) Supersedes 10/30213584 DC. (09/2013)
|
DocumentType |
Standard
|
Pages |
62
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN 14143 : 2013 | Identical |
NF EN 14143 : 2013 | Identical |
UNE-EN 14143:2014 | Identical |
NBN EN 14143 : 2013 | Identical |
NEN EN 14143 : 2013 | Identical |
I.S. EN 14143:2013 | Identical |
DIN EN 14143:2013-10 | Identical |
EN 14143:2013 | Identical |
SN EN 14143 : 2013 | Identical |
UNI EN 14143 : 2013 | Identical |
15/30318437 DC : 0 | BS 8547 - RESPIRATORY EQUIPMENT - BREATHING GAS DEMAND REGULATOR USED FOR DIVING TO DEPTHS GREATER THAN 50 METRES - REQUIREMENTS AND TEST METHODS |
IEC 61000-4-8 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
EN 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
EN 13949:2003 | Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking |
EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
EN 134:1998 | Respiratory protective devices - Nomenclature of components |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
EN 144-3:2003/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 3: OUTLET CONNECTIONS FOR DIVING GASES NITROX AND OXYGEN |
ISO 12209-1:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 1: Yoke type connections |
IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
ISO/IEC 12207:2008 | Systems and software engineering Software life cycle processes |
EN ISO 12209-1:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000) |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
EN ISO 10297:2014/A1:2017 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017) |
EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
EN ISO 12209-3:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000) |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
EN ISO 12209-2:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000) |
EN 15333-1 : 2008/AC : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
ISO 12209-2:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 2: Threaded connections |
IEC 60300-3-6:1997 | Dependability management - Part 3: Application guide - Section 6: Software aspects of dependability |
EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
ISO 12209-3:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 3: Adaptor for 230 bar valves |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.