• There are no items in your cart

BS EN 14475:2006

Current
Current

The latest, up-to-date edition.

Execution of special geotechnical works. Reinforced fill
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-31-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information needed for construction
5 Geotechnical investigations
6 Materials and products
7 Design considerations
8 Execution
9 Supervision, testing and monitoring
10 Records
11 Specific requirements
Annex A (informative) Typical use of fill types depending
        on application, reinforcement and facing
Annex B (informative)
Annex C (informative) Facing units and systems
Annex D (informative) Some typical reinforcement forms
Annex E (informative) Steel reinforcement
Annex F (informative) Recommendations for facing units
Bibliography

Describes engineered fills that are reinforced by the inclusion of horizontal or sub-horizontal reinforcement placed between layers of fill during construction.

1.1 This European Standard establishes general principles for the construction of reinforced fill. 1.2 This European Standard covers engineered fills that are reinforced by the inclusion of horizontal or sub-horizontal reinforcement placed between layers of fill during construction. 1.3 The scope of reinforced fill applications considered in this European Standard includes (Figure 1): ¾ earth retaining structures, (vertical, battered or inclined walls, bridge abutments, bulk storage facilities), with a facing to retain fill placed between the reinforcing layers; ¾ reinforced steep slopes with a facing, either built-in or added or wrap-around, reinforced shallow slopes without a facing, but covered by some form of erosion protection without a facing, reinstatement of failed slopes; ¾ embankments with basal reinforcement and embankments with reinforcement against frost heave in the upper part. Principles for the execution of other special geotechnical works using soil nails, bored piles, displacement piles, micro piles, sheet pile walls, diaphragm walls, grouting or jet grouting are established in other European Standards. Reinforcement of road pavements is not covered by this Standard.

Committee
B/526/4
DevelopmentNote
Supersedes 02/103834 DC. (10/2006)
DocumentType
Standard
Pages
60
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 6349-1-3:2012 Maritime works General. Code of practice for geotechnical design
09/30093258 DC : DRAFT JUNE 2009 BS 8006-1 - CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS
BS 8006-1(2010) : 2010 CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS
BS EN 1997-1 NA : 2004 UK NATIONAL ANNEX TO EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
12/30250709 DC : 0 BS 6349-1-3 - MARITIME WORKS - PART 1-3: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTENANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - GEOTECHNICS
14/30272166 DC : 0 BS EN 1997-1:2004/A1 - EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES

EN 10223-4:2012 Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
ISO 2063:2005 Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
NFT 90 009 : 1986 TESTING WATER - DETERMINATION OF SULPHATE IONS - GRAVIMETRIC METHOD
BS 1377:1975 Methods of test for soils for civil engineering purposes
EN 10079:2007 Definition of steel products
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
ISO 10320:1999 Geotextiles and geotextile-related products Identification on site
EN 10244-1:2009/AC:2011 STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES
EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
NFA 05 252 : 90 XP GROUND CORROSION - HOT DIP GALVANIZED OR NOT COATED STEELS IN CONTACT WITH NATURAL BACKFILL MATERIALS (SOILS)
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
BS 8006:1995 Code of practice for strengthened/reinforced soils and other fills
EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN ISO 10318 : 2005 GEOSYNTHETICS - TERMS AND DEFINITIONS
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN ISO 10320:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
ISO 9297:1989 Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method)
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
ISO 12957-1:2005 Geosynthetics Determination of friction characteristics Part 1: Direct shear test
NFT 01 013 : 74 FD PH-MEASUREMENT - ELECTROMETRIC PH-MEASUREMENT BY A GLASS ELECTRODE
EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
ENV ISO 10722-1 : 1998 GEOTEXTILES AND GEOTEXTILES-RELATED PRODUCTS - PROCEDURE FOR SIMULATING DAMAGE DURING INSTALLATION - PART 1: INSTALLATION IN GRANULAR MATERIALS
NFP 94 220 : 1992 RENFORCEMENT DES SOLS - OUVRAGES EN SOLS RAPPORTES RENFORCES PAR ARMATURES OU NAPPES PEU EXTENSIBLES ET SOUPLES - DIMENSIONNEMENT
EN 12225 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
ISO/TR 10722-1:1998 Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
ISO 10318:2005 Geosynthetics Terms and definitions
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
ISO 13431:1999 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 12447:2001 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.