• There are no items in your cart

BS EN 1462:2004

Current
Current

The latest, up-to-date edition.

Brackets for eaves gutters. Requirements and testing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-02-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Resistance to corrosion
6 Design
  6.1 General
  6.2 Load bearing capacity
  6.3 Holes for fastenings
7 Designation of gutter brackets for ordering purposes
8 Marking
9 Production control
Annex A (normative) Test method to determine the corrosion
                    resistance of plastic-coated gutter
                    brackets
      A.1 Principle
      A.2 Apparatus
      A.3 Procedure
Annex B (normative) Test method to determine the load bearing
                    capacity of gutter brackets
      B.1 Principle
      B.2 Apparatus
      B.3 Procedure

Specifies both eaves and rafter brackets for use with gutters manufactured to EN 607 and EN 612. However, roll fronted (bead stiffened) metal gutters of the type specified in EN 612 are not generally used in the UK and stronger brackets than those specified in EN 1462 are required for use with the heavier UK metal gutters.

Committee
PRI/88/1
DevelopmentNote
Supersedes 94/104990 DC. (09/2005) Together with BS EN 607 and BS EN 12200-1, supersedes BS 4576-1(1989). (10/2007)
DocumentType
Standard
Pages
18
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
DIN EN 1462:2004-12 Identical
NS EN 1462 : 2ED 2004 Identical
EN 1462:2004 Similar to
UNI EN 1462 : 2005 Identical
SN EN 1462 : 1997 Identical
UNE-EN 1462:2006 Identical
EN 1462:2004 Identical
I.S. EN 1462:2004 Identical
NBN EN 1462 : 2004 Identical
NF EN 1462 : 2005 Identical
NEN EN 1462 : 2004 Identical
EN ISO 1462 : 1995 Identical

BS 5534(2014) : 2014 SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
09/30196573 DC : 0 BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION
BS 4514:2001 Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification
13/30271503 DC : 0 BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification

EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 1676:2010 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 485-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 485-4:1993 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 10215 : 1995 CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 607:2004 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 1706:2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 1652:1997/AC:2003 COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES

View more information
US$160.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.